main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sgm58031xms10g: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sgm58031xms10g-etched.glb Publish 0.1.0 · Ray
sgm58031xms10g-etched.step sgm58031xms10g: factory component page (tier=lcsc) · Ray
sgm58031xms10g-hero.glb sgm58031xms10g: hero GLB from the etched model (keeps the MPN mark) · Ray
sgm58031xms10g-hero.overlay.json Publish 0.1.0 · Ray
sgm58031xms10g.glb Publish 0.1.0 · Ray
sgm58031xms10g.kicad_mod Publish 0.1.0 · Ray
sgm58031xms10g.kicad_sym Publish 0.1.0 · Ray
sgm58031xms10g.lbr Publish 0.1.0 · Ray
sgm58031xms10g.step Publish 0.1.0 · Ray

SGM58031XMS10G

SGMICRO · Analog To Digital Converters (ADC) · MSOP-10

SGM58031XMS10G from SGMICRO, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADDR input I2C address selection pin, connected to GND, VDD, SDA or SCL to select one of four slave addresses (1001000, 1001001, 1001010, 1001011).
2 ALERT/RDY output Digital comparator output / conversion-ready pin; it is an open-drain output and needs an external pull-up resistor.
3 GND power_in Ground.
4 AIN0 passive Positive input of differential channel 1, or input of single-ended channel 1.
5 AIN1 passive Negative input of differential channel 1, or input of single-ended channel 2.
6 AIN2 passive Positive input of differential channel 2, or input of single-ended channel 3.
7 AIN3/VREFIN passive Negative input of differential channel 2, input of single-ended channel 4, or external reference input.
8 VDD power_in Power supply pin, operated from 3V to 5.5V.
9 SDA bidirectional Serial data pin for the I2C interface.
10 SCL input Serial clock input pin for the I2C interface.

Key specifications

Parameter Value
Manufacturer SGMICRO
Package MSOP-10
Category Data Acquisition
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Data Rate Variation -6 6 % All data rates 4
Integral Nonlinearity INL 1 4 LSB DR = 8SPS, FS = ±2.048V, best fit (99% of full-scale) 4
Offset Error (differential inputs) 1 5 LSB FS = ±2.048V differential inputs 4
Offset Error (single-ended inputs) 2 8.5 LSB FS = ±2.048V single-ended inputs 4
Offset Drift 0.005 0.06 LSB/℃ FS = ±2.048V 4
Gain Error 0.03 0.3 % FS = ±2.048V at +25℃ 4
Gain Drift 30 70 ppm/℃ FS = ±2.048V 4
Gain Power-Supply Rejection 50 200 ppm/V 4
PGA Gain Match 0.1 0.28 % Match between any two PGA gains 4
Gain Match 0.01 0.08 % Match between any two inputs 4
Offset Match 1 8.5 LSB Match between any two gains 4
Internal Clock Frequency 386 410 434 kHz 4
External Reference Voltage 0.5 2.5 V 5
Low Output Voltage VOL 0.07 0.4 V IOL = 3mA 5
High Input Leakage Current IIH 0.1 1 μA VIH = 5.5V 5
Low Input Leakage Current IIL 0.1 1 μA VIL = GND 5
Power-Supply Voltage VDD 3 5.5 V 5
Power-down current at +25℃ IDD 0.8 1 μA VDD = 5.5V 5
Power-down current up to +125℃ IDD 1.8 3.8 μA VDD = 5.5V 5
Operating current at +25℃ IDD 255 320 μA VDD = 5.5V 5
Operating current up to +125℃ IDD 270 340 μA VDD = 5.5V 5
SCL Operating Frequency (standard mode) fSCL 0.01 0.1 MHz Standard mode 6
SCL Operating Frequency (fast mode) fSCL 0.01 0.4 MHz Fast mode 6
SCL Operating Frequency (high-speed mode) fSCL 0.01 3.4 MHz High-speed mode 6
Supply voltage VDD (with respect to GND) VDD -0.3 5.5 V With respect to GND 2
Analog Input Voltage -0.3 5.5 V With respect to GND 2
SDA, SCL, ADDR, ALERT/RDY Voltage -0.3 5.5 V With respect to GND 2
Input Current (Continuous) 10 mA 2
Junction Temperature 150 ℃ 2
Storage Temperature Range -65 150 ℃ 2
Lead Temperature (Soldering) 260 ℃ Soldering, 10s 2
ESD Susceptibility HBM 4000 V 2
Operating Temperature Range -40 125 ℃ 2

CAD (KiCad official)

  • Symbol: SGM58031XMS10G
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: sgm58031xms10g-etched.step / sgm58031xms10g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sgm58031xms10g.step / sgm58031xms10g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SGMICRO datasheet (27 pp, sha256 295f1806da6fe469, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF