3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSGM58031XMS10G
SGMICRO · Analog To Digital Converters (ADC) · MSOP-10
SGM58031XMS10G from SGMICRO, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | I2C address selection pin, connected to GND, VDD, SDA or SCL to select one of four slave addresses (1001000, 1001001, 1001010, 1001011). |
| 2 | ALERT/RDY | output | Digital comparator output / conversion-ready pin; it is an open-drain output and needs an external pull-up resistor. |
| 3 | GND | power_in | Ground. |
| 4 | AIN0 | passive | Positive input of differential channel 1, or input of single-ended channel 1. |
| 5 | AIN1 | passive | Negative input of differential channel 1, or input of single-ended channel 2. |
| 6 | AIN2 | passive | Positive input of differential channel 2, or input of single-ended channel 3. |
| 7 | AIN3/VREFIN | passive | Negative input of differential channel 2, input of single-ended channel 4, or external reference input. |
| 8 | VDD | power_in | Power supply pin, operated from 3V to 5.5V. |
| 9 | SDA | bidirectional | Serial data pin for the I2C interface. |
| 10 | SCL | input | Serial clock input pin for the I2C interface. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | MSOP-10 |
| Category | Data Acquisition |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Data Rate Variation | -6 | 6 | % | All data rates | 4 | ||
| Integral Nonlinearity | INL | 1 | 4 | LSB | DR = 8SPS, FS = ±2.048V, best fit (99% of full-scale) | 4 | |
| Offset Error (differential inputs) | 1 | 5 | LSB | FS = ±2.048V differential inputs | 4 | ||
| Offset Error (single-ended inputs) | 2 | 8.5 | LSB | FS = ±2.048V single-ended inputs | 4 | ||
| Offset Drift | 0.005 | 0.06 | LSB/℃ | FS = ±2.048V | 4 | ||
| Gain Error | 0.03 | 0.3 | % | FS = ±2.048V at +25℃ | 4 | ||
| Gain Drift | 30 | 70 | ppm/℃ | FS = ±2.048V | 4 | ||
| Gain Power-Supply Rejection | 50 | 200 | ppm/V | 4 | |||
| PGA Gain Match | 0.1 | 0.28 | % | Match between any two PGA gains | 4 | ||
| Gain Match | 0.01 | 0.08 | % | Match between any two inputs | 4 | ||
| Offset Match | 1 | 8.5 | LSB | Match between any two gains | 4 | ||
| Internal Clock Frequency | 386 | 410 | 434 | kHz | 4 | ||
| External Reference Voltage | 0.5 | 2.5 | V | 5 | |||
| Low Output Voltage | VOL | 0.07 | 0.4 | V | IOL = 3mA | 5 | |
| High Input Leakage Current | IIH | 0.1 | 1 | μA | VIH = 5.5V | 5 | |
| Low Input Leakage Current | IIL | 0.1 | 1 | μA | VIL = GND | 5 | |
| Power-Supply Voltage | VDD | 3 | 5.5 | V | 5 | ||
| Power-down current at +25℃ | IDD | 0.8 | 1 | μA | VDD = 5.5V | 5 | |
| Power-down current up to +125℃ | IDD | 1.8 | 3.8 | μA | VDD = 5.5V | 5 | |
| Operating current at +25℃ | IDD | 255 | 320 | μA | VDD = 5.5V | 5 | |
| Operating current up to +125℃ | IDD | 270 | 340 | μA | VDD = 5.5V | 5 | |
| SCL Operating Frequency (standard mode) | fSCL | 0.01 | 0.1 | MHz | Standard mode | 6 | |
| SCL Operating Frequency (fast mode) | fSCL | 0.01 | 0.4 | MHz | Fast mode | 6 | |
| SCL Operating Frequency (high-speed mode) | fSCL | 0.01 | 3.4 | MHz | High-speed mode | 6 | |
| Supply voltage VDD (with respect to GND) | VDD | -0.3 | 5.5 | V | With respect to GND | 2 | |
| Analog Input Voltage | -0.3 | 5.5 | V | With respect to GND | 2 | ||
| SDA, SCL, ADDR, ALERT/RDY Voltage | -0.3 | 5.5 | V | With respect to GND | 2 | ||
| Input Current (Continuous) | 10 | mA | 2 | ||||
| Junction Temperature | 150 | ℃ | 2 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10s | 2 | |||
| ESD Susceptibility HBM | 4000 | V | 2 | ||||
| Operating Temperature Range | -40 | 125 | ℃ | 2 |
CAD (KiCad official)
- Symbol:
SGM58031XMS10G - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
sgm58031xms10g-etched.step/sgm58031xms10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm58031xms10g.step/sgm58031xms10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (27 pp, sha256
295f1806da6fe469, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).