main
History Download
Ray Publish 0.1.0 49f877e

SG3524NSR

Texas Instruments · DC-DC Controllers · SO-16-208mil

SG3524NSR from Texas Instruments, in a SO-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Error amplifier input whose polarity is labelled 'Positive error amplifier input' in the datasheet pin table, which conflicts with its IN- name.
2 IN+ input Positive error amplifier input; the amplifier input common-mode range is 1.8 V to 3.4 V with the internal reference divider.
3 OSC OUT output Oscillator output with an output amplitude of 3.5 V at TA = 25°C, which also acts as the blanking pulse and can drive an external clock input.
4 CURR LIM+ input Positive current limiting amplifier input with a sense threshold of 200 mV ±25 mV and an input voltage range limited to 1 V to -1 V.
5 CURR LIM- input Negative current limiting amplifier input that can be grounded to convert CURR LIM+ into a shutdown terminal.
6 RT passive Resistor terminal used to set oscillator frequency, with timing resistor RT between 1.8 kΩ and 100 kΩ.
7 CT passive Capacitor terminal used to set oscillator frequency, with timing capacitor CT between 0.001 µF and 0.1 µF.
8 GND power_in Ground reference for the device.
9 COMP bidirectional Error amplifier compensation pin that can be pulled to ground by a circuit sinking 200 µA to shut down the device.
10 SHUTDOWN input Device shutdown input.
11 EMIT 1 output Emitter terminal of BJT output 1, with collector output current limited to 100 mA maximum.
12 COL 1 output Collector terminal of BJT output 1, with collector-emitter breakdown voltage of 40 V.
13 COL 2 output Collector terminal of BJT output 2, with collector-emitter breakdown voltage of 40 V.
14 EMIT 2 output Emitter terminal of BJT output 2, with collector output current limited to 100 mA maximum.
15 VCC power_in Positive supply with a recommended operating range of 8 V to 40 V and an absolute maximum of 40 V.
16 REF OUT output Reference regulator output of 5 V nominal, with reference output current limited to 50 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-16-208mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference output voltage VREF 4.6 5 5.4 V 5
Input regulation 10 30 mV VCC = 8 V to 40 V 5
Output regulation 20 50 mV IO = 0 mA to 20 mA 5
Output voltage change with temperature 0.3 1 % TA = MIN to MAX 5
Ripple rejection 66 dB f = 120 Hz 5
Short-circuit output current 100 mA Vref = 0 5
Input offset voltage VIO 2 10 mV VIC = 2.5 V 5
Input bias current IIB 2 10 µA VIC = 2.5 V 5
Open-loop voltage amplification 60 80 dB 5
Common-mode input voltage range VICR 1.8 3.4 V TA = 25°C 5
Common-mode rejection ratio CMMR 70 dB 5
Unity-gain bandwidth B1 3 MHz 5
Output swing 0.5 3.8 V TA = 25°C 5
Oscillator frequency fOSC 450 kHz CT = 0.001 μF, RT = 2 kΩ 6
Frequency change with voltage ΔfOSC 1 % VCC = 8 V to 40 V, TA = 25°C 6
Frequency change with temperature ΔfOSC 2 % TA = MIN to MAX 6
Output amplitude at OSC OUT 3.5 V TA = 25°C 6
Output pulse duration (width) at OSC OUT tW 0.5 µs CT = 0.01 μF, TA = 25°C 6
Collector-emitter breakdown voltage V(BR)CE 40 V 6
Collector off-state current 0.01 50 µA VCE = 40 V 6
Collector-emitter saturation voltage Vsat 1 2 V IC = 50 mA 6
Emitter output voltage VO 17 18 V VC = 20 V, IE = -250 μA 6
Turn-off voltage rise time tr 0.2 µs RC = 2 kΩ 6
Turn-on voltage fall time tf 0.1 µs RC = 2 kΩ 6
Maximum duty cycle, each output 45 % 6
Input threshold voltage at COMP, zero duty cycle VIT 1 V Zero duty cycle 6
Input threshold voltage at COMP, maximum duty cycle VIT 3.5 V Maximum duty cycle 6
Comparator input bias current IIB -1 µA 6
Input voltage range (current limiting) VI -1 1 V 6
Sense voltage V(SENSE) 175 200 225 mV TA = 25°C, V(IN+)-V(IN-) ≥ 50 mV, V(COMP) 2 V 6
Temperature coefficient of sense voltage 0.2 mV/°C 6
Standby current Ist 8 10 mA VCC = 40 V, IN-, CURR LIM+, CT, GND, COMP, EMIT 1, EMIT 2 grounded, IN+ at 2 V, All other inputs and outputs open 6
Supply voltage VCC 8 40 V 4
Reference output current IO(ref) 0 50 mA 4
Current through CT terminal -2 -0.03 mA 4
Timing resistor RT 1.8 100 kΩ 4
Timing capacitor CT 0.001 0.1 µF 4
Operating free-air temperature (SG3524) TA 0 70 °C SG3524 4
Supply voltage (absolute maximum) VCC 40 V 4
Collector output current ICC 100 mA 4
Reference output current (absolute maximum) IO(ref) 50 mA 4
Current through CT terminal (absolute maximum) -5 mA 4
Maximum junction temperature TJ 150 °C 4
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 4
Storage temperature range Tstg -65 150 °C 4
Junction-to-ambient thermal resistance (NS package) RθJA 64 °C/W NS package, 16 pins 4

CAD (KiCad official)

  • Symbol: SG3524NSR
  • Footprint: Package_SO:SO-16_5.3x10.2mm_P1.27mm
  • 3D model: SO-16-208mil (KiCad packages3D, STEP)
  • 3D model files: sg3524nsr-etched.step / sg3524nsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sg3524nsr.step / sg3524nsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 0fe91ec2ebf291e9, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF