Generated by kicad-footprint-generator · KiCad file format 20260206
SG3524NSR
Texas Instruments · DC-DC Controllers · SO-16-208mil
SG3524NSR from Texas Instruments, in a SO-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Error amplifier input whose polarity is labelled 'Positive error amplifier input' in the datasheet pin table, which conflicts with its IN- name. |
| 2 | IN+ | input | Positive error amplifier input; the amplifier input common-mode range is 1.8 V to 3.4 V with the internal reference divider. |
| 3 | OSC OUT | output | Oscillator output with an output amplitude of 3.5 V at TA = 25°C, which also acts as the blanking pulse and can drive an external clock input. |
| 4 | CURR LIM+ | input | Positive current limiting amplifier input with a sense threshold of 200 mV ±25 mV and an input voltage range limited to 1 V to -1 V. |
| 5 | CURR LIM- | input | Negative current limiting amplifier input that can be grounded to convert CURR LIM+ into a shutdown terminal. |
| 6 | RT | passive | Resistor terminal used to set oscillator frequency, with timing resistor RT between 1.8 kΩ and 100 kΩ. |
| 7 | CT | passive | Capacitor terminal used to set oscillator frequency, with timing capacitor CT between 0.001 µF and 0.1 µF. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | COMP | bidirectional | Error amplifier compensation pin that can be pulled to ground by a circuit sinking 200 µA to shut down the device. |
| 10 | SHUTDOWN | input | Device shutdown input. |
| 11 | EMIT 1 | output | Emitter terminal of BJT output 1, with collector output current limited to 100 mA maximum. |
| 12 | COL 1 | output | Collector terminal of BJT output 1, with collector-emitter breakdown voltage of 40 V. |
| 13 | COL 2 | output | Collector terminal of BJT output 2, with collector-emitter breakdown voltage of 40 V. |
| 14 | EMIT 2 | output | Emitter terminal of BJT output 2, with collector output current limited to 100 mA maximum. |
| 15 | VCC | power_in | Positive supply with a recommended operating range of 8 V to 40 V and an absolute maximum of 40 V. |
| 16 | REF OUT | output | Reference regulator output of 5 V nominal, with reference output current limited to 50 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-16-208mil |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference output voltage | VREF | 4.6 | 5 | 5.4 | V | 5 | |
| Input regulation | 10 | 30 | mV | VCC = 8 V to 40 V | 5 | ||
| Output regulation | 20 | 50 | mV | IO = 0 mA to 20 mA | 5 | ||
| Output voltage change with temperature | 0.3 | 1 | % | TA = MIN to MAX | 5 | ||
| Ripple rejection | 66 | dB | f = 120 Hz | 5 | |||
| Short-circuit output current | 100 | mA | Vref = 0 | 5 | |||
| Input offset voltage | VIO | 2 | 10 | mV | VIC = 2.5 V | 5 | |
| Input bias current | IIB | 2 | 10 | µA | VIC = 2.5 V | 5 | |
| Open-loop voltage amplification | 60 | 80 | dB | 5 | |||
| Common-mode input voltage range | VICR | 1.8 | 3.4 | V | TA = 25°C | 5 | |
| Common-mode rejection ratio | CMMR | 70 | dB | 5 | |||
| Unity-gain bandwidth | B1 | 3 | MHz | 5 | |||
| Output swing | 0.5 | 3.8 | V | TA = 25°C | 5 | ||
| Oscillator frequency | fOSC | 450 | kHz | CT = 0.001 μF, RT = 2 kΩ | 6 | ||
| Frequency change with voltage | ΔfOSC | 1 | % | VCC = 8 V to 40 V, TA = 25°C | 6 | ||
| Frequency change with temperature | ΔfOSC | 2 | % | TA = MIN to MAX | 6 | ||
| Output amplitude at OSC OUT | 3.5 | V | TA = 25°C | 6 | |||
| Output pulse duration (width) at OSC OUT | tW | 0.5 | µs | CT = 0.01 μF, TA = 25°C | 6 | ||
| Collector-emitter breakdown voltage | V(BR)CE | 40 | V | 6 | |||
| Collector off-state current | 0.01 | 50 | µA | VCE = 40 V | 6 | ||
| Collector-emitter saturation voltage | Vsat | 1 | 2 | V | IC = 50 mA | 6 | |
| Emitter output voltage | VO | 17 | 18 | V | VC = 20 V, IE = -250 μA | 6 | |
| Turn-off voltage rise time | tr | 0.2 | µs | RC = 2 kΩ | 6 | ||
| Turn-on voltage fall time | tf | 0.1 | µs | RC = 2 kΩ | 6 | ||
| Maximum duty cycle, each output | 45 | % | 6 | ||||
| Input threshold voltage at COMP, zero duty cycle | VIT | 1 | V | Zero duty cycle | 6 | ||
| Input threshold voltage at COMP, maximum duty cycle | VIT | 3.5 | V | Maximum duty cycle | 6 | ||
| Comparator input bias current | IIB | -1 | µA | 6 | |||
| Input voltage range (current limiting) | VI | -1 | 1 | V | 6 | ||
| Sense voltage | V(SENSE) | 175 | 200 | 225 | mV | TA = 25°C, V(IN+)-V(IN-) ≥ 50 mV, V(COMP) 2 V | 6 |
| Temperature coefficient of sense voltage | 0.2 | mV/°C | 6 | ||||
| Standby current | Ist | 8 | 10 | mA | VCC = 40 V, IN-, CURR LIM+, CT, GND, COMP, EMIT 1, EMIT 2 grounded, IN+ at 2 V, All other inputs and outputs open | 6 | |
| Supply voltage | VCC | 8 | 40 | V | 4 | ||
| Reference output current | IO(ref) | 0 | 50 | mA | 4 | ||
| Current through CT terminal | -2 | -0.03 | mA | 4 | |||
| Timing resistor | RT | 1.8 | 100 | kΩ | 4 | ||
| Timing capacitor | CT | 0.001 | 0.1 | µF | 4 | ||
| Operating free-air temperature (SG3524) | TA | 0 | 70 | °C | SG3524 | 4 | |
| Supply voltage (absolute maximum) | VCC | 40 | V | 4 | |||
| Collector output current | ICC | 100 | mA | 4 | |||
| Reference output current (absolute maximum) | IO(ref) | 50 | mA | 4 | |||
| Current through CT terminal (absolute maximum) | -5 | mA | 4 | ||||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (NS package) | RθJA | 64 | °C/W | NS package, 16 pins | 4 |
CAD (KiCad official)
- Symbol:
SG3524NSR - Footprint:
Package_SO:SO-16_5.3x10.2mm_P1.27mm - 3D model: SO-16-208mil (KiCad packages3D, STEP)
- 3D model files:
sg3524nsr-etched.step/sg3524nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg3524nsr.step/sg3524nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
0fe91ec2ebf291e9, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).