main
Ray Publish 0.2.1 05459c4
{
  "schema_version": 1,
  "type": "component",
  "slug": "sg3524dr",
  "title": "SG3524DR",
  "brief": "UMW DC-DC Converters, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "sg3524dr"
  ],
  "component": {
    "mpn": "SG3524DR",
    "manufacturer": "UMW",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091746_UMW-Youtai-Semiconductor-Co---Ltd--SG3524DR-UMW_C7503196.pdf",
    "parts": {
      "symbol": "sg3524dr.kicad_sym",
      "footprint": "sg3524dr.kicad_mod",
      "model_3d": "sg3524dr-hero.glb",
      "model_3d_plain": "sg3524dr.glb",
      "model_3d_step": "sg3524dr-etched.step",
      "model_3d_step_plain": "sg3524dr.step",
      "lbr": "sg3524dr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "INV.INPUT",
        "type": "input",
        "description": "Inverting input of the internal error amplifier. Tied to the feedback network of the switching regulator's output-voltage divider."
      },
      {
        "number": "2",
        "name": "N.I.INPUT",
        "type": "input",
        "description": "Non-inverting input of the internal error amplifier. Normally driven from a reference-derived setpoint (e.g. divider off VREF)."
      },
      {
        "number": "3",
        "name": "OSC.OUTPUT",
        "type": "output",
        "description": "Oscillator sawtooth/sync output. Provides a ~3.5V peak clock/sync waveform (0.3-1.5µs pulse width) usable for external synchronization or as a blanking/dead-time signal."
      },
      {
        "number": "4",
        "name": "+C.L. SENSE",
        "type": "input",
        "description": "Non-inverting input of the current-limit sense amplifier. Connect across the current-sense resistor with pin 5; limit threshold is ~200mV."
      },
      {
        "number": "5",
        "name": "-C.L. SENSE",
        "type": "input",
        "description": "Inverting input of the current-limit sense amplifier. Paired with pin 4 across the current-sense element to fold back the PWM when overcurrent is detected."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "passive",
        "description": "Timing resistor terminal. External RT from this pin to ground sets the oscillator charging current; recommended range 1.8kΩ to 100kΩ."
      },
      {
        "number": "7",
        "name": "CT",
        "type": "passive",
        "description": "Timing capacitor terminal. External CT from this pin to ground sets the oscillator ramp; recommended range 0.001µF to 0.1µF. Fosc ≈ 1.30/(RT·CT)."
      },
      {
        "number": "8",
        "name": "GROUND",
        "type": "power_in",
        "description": "Device signal and power ground return (0V). All internal references, oscillator, comparators and output transistor emitters (when tied here) are referred to this node."
      },
      {
        "number": "9",
        "name": "COMPENSATION",
        "type": "output",
        "description": "Error-amplifier output / PWM comparator input. Loop-compensation network (typically a series R-C to INV.INPUT) is connected here to shape the control-loop response."
      },
      {
        "number": "10",
        "name": "SHUTDOWN",
        "type": "input",
        "description": "Active-high shutdown input. Pulling above the turn-off threshold (typ 0.8V, 0.5-1.2V) inhibits both PWM outputs. Tie low or leave unused for normal operation."
      },
      {
        "number": "11",
        "name": "EA",
        "type": "output",
        "description": "Emitter of output transistor A (uncommitted NPN). Used as the output when the stage is configured as an emitter follower, or grounded when the collector is used as the switching node."
      },
      {
        "number": "12",
        "name": "CA",
        "type": "output",
        "description": "Collector of output transistor A (uncommitted NPN). Rated 40V / 100mA per package, 50mA per output; used for single-ended or push-pull drive to an external switch or transformer."
      },
      {
        "number": "13",
        "name": "CB",
        "type": "output",
        "description": "Collector of output transistor B (uncommitted NPN). Complementary phase to CA; toggles alternately at half the oscillator frequency for push-pull operation."
      },
      {
        "number": "14",
        "name": "EB",
        "type": "output",
        "description": "Emitter of output transistor B (uncommitted NPN). Serves as the emitter-follower output or is grounded when CB is used as the switching node."
      },
      {
        "number": "15",
        "name": "+VIN",
        "type": "power_in",
        "description": "Main supply input. Recommended 8V to 40V; absolute max 40V. Powers the reference, oscillator, error amp and output transistors. Bypass locally to GROUND."
      },
      {
        "number": "16",
        "name": "VREF",
        "type": "power_out",
        "description": "Internally regulated 5V reference output (4.8-5.2V), source capability up to 20mA (short-circuit current 25-150mA). Used to bias external dividers and the error-amp non-inverting input."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091746_UMW-Youtai-Semiconductor-Co---Ltd--SG3524DR-UMW_C7503196.pdf",
        "pages": 12,
        "sha256": "366bbb2f3ad77931",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sg3524dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sg3524dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "bfbafd4d3e56a0ea0f81ecf8a78235ee8b64291826c74ef6bc3d6570be9c83a4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "UMW",
      "Package": "SOP-16",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sg3524dr"
  ],
  "discovery_pitch": "SG3524DR (UMW) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sg3524dr.kicad_sym",
    "sg3524dr.kicad_mod",
    "sg3524dr.glb",
    "sg3524dr.step",
    "sg3524dr-etched.step",
    "sg3524dr.lbr",
    "docs/hero.png",
    "docs/sg3524dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sg3524dr-hero.glb",
    "sg3524dr-hero.overlay.json"
  ],
  "visibility": "public",
  "variants": [
    {
      "mpn": "SG3524DR",
      "kind": "packaging"
    },
    {
      "mpn": "SG3524DRD",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T05:44:30.472Z",
  "description": "UMW DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}