main
Ray
Publish 0.2.3
de8dc00
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218
{
"slug": "sen-24540",
"version": "0.2.3",
"type": "component",
"description": "SparkFun Qwiic Pulsed Coherent Radar Sensor XM125 (SparkFun SEN-24540): edge-hole pinout symbol, the J14/J15 footprint with the board outline and mounting holes, and a 3D model, all from SparkFun's open Eagle board file.",
"tags": [
"component",
"dev board",
"breakout",
"sparkfun",
"qwiic",
"radar",
"xm125",
"a121",
"sen-24540"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"component": {
"mpn": "SEN-24540",
"manufacturer": "SparkFun Electronics",
"package": "Breakout board, 9 + 11 edge holes, 2.54 mm pitch, 25.4 x 50.8 mm",
"pin_count": 20,
"category": "Development Boards",
"subcategory": "Evaluation Boards (Sensors)",
"datasheet": "https://developer.acconeer.com/download/xm125-datasheet/",
"parts": {
"symbol": "sen-24540.kicad_sym",
"footprint": "sen-24540.kicad_mod",
"model_3d": "sen-24540-hero.glb",
"model_3d_plain": "sen-24540.glb",
"model_3d_step": "sen-24540.step",
"model_3d_step_plain": "sen-24540.step",
"lbr": "sen-24540.lbr",
"datasheet": "docs/xm125-datasheet.pdf"
},
"distributor_links": {
"digikey": "1568-24540-ND"
},
"pins": [
{
"number": "J14-1",
"name": "RST",
"type": "input",
"description": "J14 pin 1 (!XM125_RESET): Reset (active low); the RESET button pulls it to ground."
},
{
"number": "J14-2",
"name": "CLK",
"type": "input",
"description": "J14 pin 2 (SWD_CLK): SWDCLK, the XM125 STM32L431 programming clock."
},
{
"number": "J14-3",
"name": "SIO",
"type": "bidirectional",
"description": "J14 pin 3 (SWD_IO): SWDIO, the XM125 STM32L431 programming data."
},
{
"number": "J14-4",
"name": "G",
"type": "power_in",
"description": "J14 pin 4 (GND): Ground."
},
{
"number": "J14-5",
"name": "G",
"type": "power_in",
"description": "J14 pin 5 (GND): Ground."
},
{
"number": "J14-6",
"name": "VU",
"type": "power_in",
"description": "J14 pin 6 (V_USB): USB VBUS (VUSB), input to the 3.3 V regulator; no more than 6 V."
},
{
"number": "J14-7",
"name": "1V8",
"type": "power_out",
"description": "J14 pin 7 (1.8V): 1.8 V from the RT9080 1.8 V regulator."
},
{
"number": "J14-8",
"name": "3V3",
"type": "power_out",
"description": "J14 pin 8 (3.3V): 3.3 V rail."
},
{
"number": "J14-9",
"name": "INT",
"type": "output",
"description": "J14 pin 9 (!XM125_INT): Interrupt output (active low) from the XM125."
},
{
"number": "J15-1",
"name": "WU",
"type": "input",
"description": "J15 pin 1 (WAKE_UP): WAKE_UP: high wakes the XM125 from low power; tied to 3.3 V through the WU jumper."
},
{
"number": "J15-2",
"name": "SCL",
"type": "input",
"description": "J15 pin 2 (SCL): I2C clock (2.2 kOhm pull-up)."
},
{
"number": "J15-3",
"name": "SDA",
"type": "bidirectional",
"description": "J15 pin 3 (SDA): I2C data (2.2 kOhm pull-up)."
},
{
"number": "J15-4",
"name": "3V3",
"type": "power_out",
"description": "J15 pin 4 (3.3V): 3.3 V rail."
},
{
"number": "J15-5",
"name": "G",
"type": "power_in",
"description": "J15 pin 5 (GND): Ground."
},
{
"number": "J15-6",
"name": "ADDR",
"type": "input",
"description": "J15 pin 6 (XM125_I2C_ADDRESS): I2C_ADDR, the XM125 I2C address select (also the ADDR jumper)."
},
{
"number": "J15-7",
"name": "RX",
"type": "input",
"description": "J15 pin 7 (DEBUG_UART-RX): Debug UART receive."
},
{
"number": "J15-8",
"name": "TX",
"type": "output",
"description": "J15 pin 8 (DEBUG_UART-TX): Debug UART transmit."
},
{
"number": "J15-9",
"name": "IO0",
"type": "bidirectional",
"description": "J15 pin 9 (XM125_GPIO0): XM125 GPIO0 (presence detector firmware)."
},
{
"number": "J15-10",
"name": "IO1",
"type": "bidirectional",
"description": "J15 pin 10 (XM125_GPIO1): XM125 GPIO1."
},
{
"number": "J15-11",
"name": "BOOT",
"type": "bidirectional",
"description": "J15 pin 11 (XM125_GPIO2/BOOT0): GPIO2/BOOT0: the BOOT button pulls it to 3.3 V for the bootloader."
}
],
"aliases": [
"24540"
],
"module": {
"page": null,
"name": "Acconeer XM125"
},
"documents": {
"product_page": "https://www.sparkfun.com/products/24540",
"hookup_guide": "https://docs.sparkfun.com/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125/",
"hardware_repo": "https://github.com/sparkfun/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125",
"schematic": "https://github.com/sparkfun/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125/blob/main/docs/assets/board_files/SparkFun_Qwiic_Pulsed_Coherent_Radar_Sensor_Breakout-XM125_Schematic_v10.pdf",
"board_file": "https://github.com/sparkfun/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125/blob/main/Hardware/XM125_Breakout.brd",
"module_datasheet": "https://developer.acconeer.com/download/xm125-datasheet/",
"module_design_source": "https://developer.acconeer.com/download/src-xm125_v1-1/"
},
"provenance": {
"pins": "pin names: board silkscreen, from SparkFun's .brd (the label printed beside each hole); nets from the same file; functions from SparkFun's hardware overview",
"footprint": "SparkFun's Eagle board file Hardware/XM125_Breakout.brd (outline, hole positions and sizes)",
"model_3d": "SparkFun's Eagle board file imported in KiCad 10: outline, red mask, silkscreen, copper pads and plated holes; every part at its board-file position, rotation and side with a real model fitted to its pads (our wiki pages: USB-C type-c-31-m-12, Qwiic sm04b-srss-tb, ch340c, rt9080-33gj5, KiCad library: 0603 R/C/LED, SOT-23-6, E-Switch TL3342 5.2 mm tact switch (nearest real model to SparkFun's 5.2 mm switch); Qwiic housings black from SparkFun's photo); the XM125 is Acconeer's own module board (SRC-XM125 v1.1, Altium) with its embedded part models. No headers (the board ships without them). J13 (SWD, not fitted) has no model."
},
"models_3d": [
{
"file": "sen-24540.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
25.4,
52.135,
6.74
],
"zmin_mm": -1.835,
"centre_offset_mm": 5.748,
"footprint_binding": "identity",
"sha256": "5b3b1ec4872e32a42d37bdac64c03eee5638adf2e9d876c298a5135bde649dbd",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"pin_names_source": {
"kind": "board_silkscreen",
"board_file": "docs/XM125_Breakout.brd"
},
"datasheet_source": {
"kind": "maker_pdf",
"url": "https://developer.acconeer.com/download/xm125-datasheet/",
"module": "Acconeer XM125",
"note": "the radar module on this board; SparkFun publishes no separate breakout datasheet"
}
}
}