main
Ray
Publish 0.1.1
e55f3a7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173
{
"schema_version": 1,
"type": "component",
"slug": "sd8052",
"title": "SD8052",
"brief": "SHOUDING Battery Management, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"sd8052"
],
"component": {
"mpn": "SD8052",
"manufacturer": "SHOUDING",
"package": "SOT-23-5",
"pin_count": 5,
"category": "PMIC",
"subcategory": "Battery Management",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d113364156dbc7d179e283199f2a4691.pdf",
"parts": {
"symbol": "sd8052.kicad_sym",
"footprint": "sd8052.kicad_mod",
"model_3d": "sd8052-hero.glb",
"model_3d_plain": "sd8052.glb",
"model_3d_step": "sd8052-etched.step",
"model_3d_step_plain": "sd8052.step",
"lbr": "sd8052.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "CHRG",
"type": "output",
"description": "Open-drain charge status output. Pulled low by an internal N-channel MOSFET while charging; goes high-impedance when charge completes. In the low-battery lockout condition CHRG also goes high-impedance; with ~1 μF from BAT to GND this pin will flash quickly when no battery is present, giving a battery-present indication. Typical weak pull-down current 20 μA at VCHRG=5 V."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Device ground / return."
},
{
"number": "3",
"name": "BAT",
"type": "power_out",
"description": "Charge current output to the Li-Ion cell. Supplies charge current and regulates the float voltage to 4.2 V ±1%. An internal precision resistor divider senses this pin; when the battery is reversed the internal protection prevents damage to the VBAT ESD diode and about 0.7 mA flows from GND to BAT."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Positive supply input to the charger. Operates from 4.25 V to 6.5 V and requires at least a 1 μF bypass capacitor. When VCC drops within 30 mV of VBAT the SD8052 enters standby and BAT current falls below 2 μA."
},
{
"number": "5",
"name": "PROG",
"type": "bidirectional",
"description": "Charge-current program, monitor, and shutdown pin. A resistor from PROG to GND (1% tolerance) sets constant-current charge current: IBAT = (VPROG/RPROG) × 1000, with VPROG ≈ 1.0 V in constant-current mode. Pulling PROG above the ~1.21 V manual-shutdown threshold (via a ~3 μA pull-up from an external source) puts the part into shutdown (input current drops to ~25 μA); driving PROG above the ~2.4 V clamp yields about 1.5 mA sink to that pin. Reconnecting PROG to GND resumes normal charging."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/d113364156dbc7d179e283199f2a4691.pdf",
"pages": 7,
"sha256": "d4f0cebb981b1ecc",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 5,
"described": 5,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sd8052.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sd8052-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "af8caf1a175283b742477452c9429550941c6d282811db5116c153b0c4d2ec8c",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "SHOUDING",
"Package": "SOT-23-5",
"Category": "PMIC",
"Pins": "5"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"sd8052"
],
"discovery_pitch": "SD8052 (SHOUDING) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sd8052.kicad_sym",
"sd8052.kicad_mod",
"sd8052.glb",
"sd8052.step",
"sd8052.lbr",
"docs/hero.png",
"docs/sd8052-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sd8052-etched.step",
"sd8052-hero.glb",
"sd8052-hero.overlay.json"
],
"visibility": "public",
"updated_at": "2026-09-25T05:37:32.742Z",
"description": "SHOUDING Battery Management, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"org": "adom"
}