main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sd8052: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sd8052: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md sd8052: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
sd8052-etched.fit.json sd8052: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sd8052-etched.glb sd8052: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
sd8052-etched.step sd8052: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
sd8052-hero.glb sd8052: hero from the plain model · Ray
sd8052-hero.overlay.json sd8052: hero from the plain model · Ray
sd8052.glb Publish 0.1.0 · Ray
sd8052.kicad_mod Publish 0.1.0 · Ray
sd8052.kicad_sym Publish 0.1.0 · Ray
sd8052.lbr Publish 0.1.0 · Ray
sd8052.step Publish 0.1.0 · Ray

SD8052

SHOUDING · Battery Management · SOT-23-5

SD8052 from SHOUDING, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Open-drain charge status output. Pulled low by an internal N-channel MOSFET while charging; goes high-impedance when charge completes. In the low-battery lockout condition CHRG also goes high-impedance; with ~1 μF from BAT to GND this pin will flash quickly when no battery is present, giving a battery-present indication. Typical weak pull-down current 20 μA at VCHRG=5 V.
2 GND power_in Device ground / return.
3 BAT power_out Charge current output to the Li-Ion cell. Supplies charge current and regulates the float voltage to 4.2 V ±1%. An internal precision resistor divider senses this pin; when the battery is reversed the internal protection prevents damage to the VBAT ESD diode and about 0.7 mA flows from GND to BAT.
4 VCC power_in Positive supply input to the charger. Operates from 4.25 V to 6.5 V and requires at least a 1 μF bypass capacitor. When VCC drops within 30 mV of VBAT the SD8052 enters standby and BAT current falls below 2 μA.
5 PROG bidirectional Charge-current program, monitor, and shutdown pin. A resistor from PROG to GND (1% tolerance) sets constant-current charge current: IBAT = (VPROG/RPROG) × 1000, with VPROG ≈ 1.0 V in constant-current mode. Pulling PROG above the ~1.21 V manual-shutdown threshold (via a ~3 μA pull-up from an external source) puts the part into shutdown (input current drops to ~25 μA); driving PROG above the ~2.4 V clamp yields about 1.5 mA sink to that pin. Reconnecting PROG to GND resumes normal charging.

Key specifications

Parameter Value
Manufacturer SHOUDING
Package SOT-23-5
Category PMIC
Pins 5

CAD (KiCad official)

  • Symbol: SD8052
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: sd8052-etched.step / sd8052-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sd8052.step / sd8052.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SHOUDING datasheet (7 pp, sha256 d4f0cebb981b1ecc, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF