main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sd5358a: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sd5358a-etched.glb sd5358a: factory component page (tier=lcsc) · Ray
sd5358a-etched.step sd5358a: factory component page (tier=lcsc) · Ray
sd5358a-hero.glb sd5358a: hero GLB from the etched model (keeps the MPN mark) · Ray
sd5358a-hero.overlay.json sd5358a: hero GLB from the etched model (keeps the MPN mark) · Ray
sd5358a.glb Publish 0.1.0 · Ray
sd5358a.kicad_mod Publish 0.1.0 · Ray
sd5358a.kicad_sym Publish 0.1.0 · Ray
sd5358a.lbr Publish 0.1.0 · Ray
sd5358a.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

SD5358A

SHOUDING · Battery Management ICs · SOT-23-5

SD5358A from SHOUDING, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VT passive Test pin for vendor use only, not used by the application.
2 GND power_in Ground; connect the negative terminal of the battery to this pin.
3 VDD power_in Power supply; absolute maximum input voltage -0.3 to 6 V.
4 VM bidirectional Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with input voltage range -6 to 10 V.
5 VM bidirectional Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with input voltage range -6 to 10 V.

Key specifications

Parameter Value
Manufacturer SHOUDING
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Overcharge Detection Voltage VCU 4.25 4.3 4.35 V TA = 25°C 3
Overcharge Release Voltage VCL 4.05 4.1 4.15 V TA = 25°C 3
Overdischarge Detection Voltage VDL 2.3 2.4 2.5 V TA = 25°C 3
Overdischarge Release Voltage VDR 2.9 3 3.1 V TA = 25°C 3
Charger Detection Voltage VCHA -0.07 -0.12 -0.2 V TA = 25°C 3
Overdischarge Current1 Detection IIOV1 2.1 3 3.9 A VDD=3.5V 3
Load Short-Circuiting Detection ISHORT 10 20 30 A VDD=3.5V 3
Current Consumption in Normal Operation IOPE 2.8 6 μA VDD=3.5V, VM=0V 3
Current Consumption in Power Down IPDN 0.1 μA VDD=2.0V, VM pin floating 3
Internal Resistance between VM and VDD RVMD 320 kΩ VDD=3.5V, VM=1.0V 3
Internal Resistance between VM and GND RVMS 100 kΩ VDD=2.0V, VM=1.0V 3
Equivalent FET on Resistance RDS(ON) 40 45 55 mΩ VDD=3.6V, IVM=1.0A 3
Over Temperature Protection TSHD+ 120 °C 3
Over Temperature Recovery Degree TSHD- 100 °C 3
Overcharge Voltage Detection Delay Time tCU 130 200 mS 4
Overdischarge Voltage Detection Delay Time tDL 40 60 mS 4
Overdischarge Current Detection Delay Time tIOV 15 20 mS VDD=3.5V 4
Load Short-Circuiting Detection Delay Time tSHORT 180 300 uS VDD=3.5V 4
VDD input pin voltage VDD -0.3 6 V 2
VM input pin voltage VM -6 10 V 2
Operating Ambient Temperature -40 85 °C 2
Maximum Junction Temperature 125 °C 2
Storage Temperature -55 150 °C 3
Lead Temperature 300 °C Soldering, 10 sec 3
Power Dissipation 0.4 W T=25°C 3
ESD 2000 V 3
Package Thermal Resistance (Junction to Ambient) θJA 250 °C/W 3
Package Thermal Resistance (Junction to Case) θJC 130 °C/W 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SD5358A
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sd5358a-etched.step / sd5358a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sd5358a.step / sd5358a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SHOUDING datasheet (11 pp, sha256 21757bacd8cb6e34, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF