3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSD5358A
SHOUDING · Battery Management ICs · SOT-23-5
SD5358A from SHOUDING, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VT | passive | Test pin for vendor use only, not used by the application. |
| 2 | GND | power_in | Ground; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply; absolute maximum input voltage -0.3 to 6 V. |
| 4 | VM | bidirectional | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with input voltage range -6 to 10 V. |
| 5 | VM | bidirectional | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with input voltage range -6 to 10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOUDING |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge Detection Voltage | VCU | 4.25 | 4.3 | 4.35 | V | TA = 25°C | 3 |
| Overcharge Release Voltage | VCL | 4.05 | 4.1 | 4.15 | V | TA = 25°C | 3 |
| Overdischarge Detection Voltage | VDL | 2.3 | 2.4 | 2.5 | V | TA = 25°C | 3 |
| Overdischarge Release Voltage | VDR | 2.9 | 3 | 3.1 | V | TA = 25°C | 3 |
| Charger Detection Voltage | VCHA | -0.07 | -0.12 | -0.2 | V | TA = 25°C | 3 |
| Overdischarge Current1 Detection | IIOV1 | 2.1 | 3 | 3.9 | A | VDD=3.5V | 3 |
| Load Short-Circuiting Detection | ISHORT | 10 | 20 | 30 | A | VDD=3.5V | 3 |
| Current Consumption in Normal Operation | IOPE | 2.8 | 6 | μA | VDD=3.5V, VM=0V | 3 | |
| Current Consumption in Power Down | IPDN | 0.1 | μA | VDD=2.0V, VM pin floating | 3 | ||
| Internal Resistance between VM and VDD | RVMD | 320 | kΩ | VDD=3.5V, VM=1.0V | 3 | ||
| Internal Resistance between VM and GND | RVMS | 100 | kΩ | VDD=2.0V, VM=1.0V | 3 | ||
| Equivalent FET on Resistance | RDS(ON) | 40 | 45 | 55 | mΩ | VDD=3.6V, IVM=1.0A | 3 |
| Over Temperature Protection | TSHD+ | 120 | °C | 3 | |||
| Over Temperature Recovery Degree | TSHD- | 100 | °C | 3 | |||
| Overcharge Voltage Detection Delay Time | tCU | 130 | 200 | mS | 4 | ||
| Overdischarge Voltage Detection Delay Time | tDL | 40 | 60 | mS | 4 | ||
| Overdischarge Current Detection Delay Time | tIOV | 15 | 20 | mS | VDD=3.5V | 4 | |
| Load Short-Circuiting Detection Delay Time | tSHORT | 180 | 300 | uS | VDD=3.5V | 4 | |
| VDD input pin voltage | VDD | -0.3 | 6 | V | 2 | ||
| VM input pin voltage | VM | -6 | 10 | V | 2 | ||
| Operating Ambient Temperature | -40 | 85 | °C | 2 | |||
| Maximum Junction Temperature | 125 | °C | 2 | ||||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 3 | |||
| Power Dissipation | 0.4 | W | T=25°C | 3 | |||
| ESD | 2000 | V | 3 | ||||
| Package Thermal Resistance (Junction to Ambient) | θJA | 250 | °C/W | 3 | |||
| Package Thermal Resistance (Junction to Case) | θJC | 130 | °C/W | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SD5358A - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sd5358a-etched.step/sd5358a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sd5358a.step/sd5358a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOUDING datasheet (11 pp, sha256
21757bacd8cb6e34, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).