Generated by kicad-footprint-generator · KiCad file format 20260206
SD5087-GEC
SHOUDING · Linear Voltage Regulators (LDO) · SOT-23-5
SD5087-GEC from SHOUDING, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage, specified from 1.8V to 5.5V, and must be locally bypassed. |
| 2 | GND | power_in | Signal and power ground; provide a short direct PCB path between GND and the (-) side of the output capacitor(s). |
| 3 | EN | input | ON/OFF control (high enable): forcing above 1.4V enables the part and below 0.8V shuts it down, and it must not be left floating. |
| 4 | NC | unconnected | No connect; the pin is not connected internally. |
| 5 | VOUT | power_out | Fixed regulated output voltage of the LDO, rated for up to 300mA maximum output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOUDING |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VIN | 1.8 | 5.5 | V | 3 | ||
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT = 10mA | 3 | |
| Current Limited | ILIM | 330 | 400 | 560 | mA | VIN =VOUT + 1V | 3 |
| Input Supply, EN Voltage | -0.3 | 6 | V | 2 | |||
| Operating Temperature Range | -45 | 80 | ℃ | Note 2 | 2 | ||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Junction Temperature Range | 125 | ℃ | 2 | ||||
| Lead Temperature (Soldering) | 265 | ℃ | 10 sec. | 2 | |||
| Quiescent Current | IQ | 60 | μA | 2.2V ≤ VIN ≤ 5.5V | 3 | ||
| Shutdown Current | IOFF | 0.02 | μA | VEN = 0V, VIN = 5V | 3 | ||
| Dropout Voltage: VIN -VOUT | VDROP | 150 | mV | IOUT =150mA, VOUT ≥2.8V | 3 | ||
| EN Threshold Voltage (High) | VENH | 1.4 | V | VIN = 5V | 3 | ||
| EN Threshold Voltage (Low) | VENL | 0.8 | V | 3 | |||
| Enable Pin Current | IEN | 0.1 | μA | 3 | |||
| Power Supply Rejection Rate | PRSS | -65 | dB | f = 1kHz, IOUT = 100mA | 3 | ||
| Line Regulation | ΔVLINE | 2 | mV | VIN = (VOUT+0.5) to 5.5V, IOUT = 0mA | 3 | ||
| Load Regulation | ΔVLOAD | 10 | mV | 0mA ≤ IOUT ≤ 100mA | 3 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 20 | ℃ | 3 | |||
| Thermal Shutdown Temperature | TSD | 160 | ℃ | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SD5087-GEC - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sd5087-gec-etched.step/sd5087-gec-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sd5087-gec.step/sd5087-gec.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOUDING datasheet (12 pp, sha256
091e9f1974518725, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).