Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SD5087-GEC

SHOUDING · Linear Voltage Regulators (LDO) · SOT-23-5

SD5087-GEC from SHOUDING, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage, specified from 1.8V to 5.5V, and must be locally bypassed.
2 GND power_in Signal and power ground; provide a short direct PCB path between GND and the (-) side of the output capacitor(s).
3 EN input ON/OFF control (high enable): forcing above 1.4V enables the part and below 0.8V shuts it down, and it must not be left floating.
4 NC unconnected No connect; the pin is not connected internally.
5 VOUT power_out Fixed regulated output voltage of the LDO, rated for up to 300mA maximum output current.

Key specifications

Parameter Value
Manufacturer SHOUDING
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VIN 1.8 5.5 V 3
Output Voltage Accuracy ΔVOUT -2 2 % IOUT = 10mA 3
Current Limited ILIM 330 400 560 mA VIN =VOUT + 1V 3
Input Supply, EN Voltage -0.3 6 V 2
Operating Temperature Range -45 80 ℃ Note 2 2
Storage Temperature Range -65 150 ℃ 2
Junction Temperature Range 125 ℃ 2
Lead Temperature (Soldering) 265 ℃ 10 sec. 2
Quiescent Current IQ 60 μA 2.2V ≤ VIN ≤ 5.5V 3
Shutdown Current IOFF 0.02 μA VEN = 0V, VIN = 5V 3
Dropout Voltage: VIN -VOUT VDROP 150 mV IOUT =150mA, VOUT ≥2.8V 3
EN Threshold Voltage (High) VENH 1.4 V VIN = 5V 3
EN Threshold Voltage (Low) VENL 0.8 V 3
Enable Pin Current IEN 0.1 μA 3
Power Supply Rejection Rate PRSS -65 dB f = 1kHz, IOUT = 100mA 3
Line Regulation ΔVLINE 2 mV VIN = (VOUT+0.5) to 5.5V, IOUT = 0mA 3
Load Regulation ΔVLOAD 10 mV 0mA ≤ IOUT ≤ 100mA 3
Thermal Shutdown Hysteresis ΔTSD 20 ℃ 3
Thermal Shutdown Temperature TSD 160 ℃ 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SD5087-GEC
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sd5087-gec-etched.step / sd5087-gec-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sd5087-gec.step / sd5087-gec.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SHOUDING datasheet (12 pp, sha256 091e9f1974518725, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF