main
Ray
sct9330ster: specified limits as data (metadata.characteristics, 33 rows from the datasheet)
e875ac9
SCT9330STER
SCT · DC-DC Converters · ESOP-8
SCT9330STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_in | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF or greater ceramic capacitor between BOOT and SW to provide the boosted gate-drive voltage. |
| 2 | VIN | power_in | Power supply input, 3.8V to 28V operating range (absolute max 34V). Must be locally bypassed with a low-ESR ceramic capacitor close to the pin. |
| 3 | EN | input | Enable logic input; floating enables the device. Supports direct connection to VIN up to 34V; precision UVLO thresholds at 1.18V rising / 1.1V falling for programmable UVLO via a resistor divider. |
| 4 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 5 | FB | input | Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB; the device regulates FB to the internal 0.8V (±1%) reference. |
| 6 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 7 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 8 | SW | output | Switching node of the buck converter; the source of the high-side MOSFET and drain of the low-side MOSFET. Connect to the output inductor; absolute max range -0.3V to 34V. |
| 9 | GND (Thermal Pad) | power_in | Exposed thermal pad; serves as device GND and the primary heat-dissipation path. Must be soldered to the PCB ground plane for proper electrical operation and thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
SCT9330STER
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (VIN) - electrical table | VIN | 3.8 | 28 | V | 3 | ||
| Shutdown current | ISD | 1 | 3 | uA | EN=0, No load, VIN=12V | 3 | |
| FSS jittering span | FJITTER | -6 | 6 | % | 4 | ||
| BST pin voltage | BST | -0.3 | 38 | V | Over operating free-air temperature | 2 | |
| VIN, SW, EN pin voltage | VIN, SW, EN | -0.3 | 34 | V | Over operating free-air temperature | 2 | |
| FB pin voltage | FB | -0.3 | 5.5 | V | Over operating free-air temperature | 2 | |
| Operating junction temperature | TJ | -40 | 125 | C | Over operating free-air temperature | 2 | |
| Storage temperature | TSTG | -65 | 150 | C | 2 | ||
| Input voltage range (VIN) | VIN | 3.8 | 28 | V | Over operating free-air temperature range | 3 | |
| Operating junction temperature | TJ | -40 | 125 | °C | Over operating free-air temperature range | 3 | |
| Input UVLO threshold, VIN rising | VIN_UVLO | 3.5 | V | VIN rising | 3 | ||
| Input UVLO hysteresis | VIN_UVLO | 420 | mV | Hysteresis | 3 | ||
| Quiescent current | IQ | 20 | uA | EN=floating, No load, No switching. VIN=12V. BST-SW=5V | 3 | ||
| Enable high threshold | VEN_H | 1.18 | V | 3 | |||
| Enable low threshold | VEN_L | 1.1 | V | 3 | |||
| Enable pin input current | IEN | 1.5 | uA | EN=1V | 3 | ||
| Enable pin hysteresis current | IEN_HYS | 4 | uA | EN=1.5V | 3 | ||
| High side FET on-resistance | RDSON_H | 85 | mΩ | 3 | |||
| Low side FET on-resistance | RDSON_L | 48 | mΩ | 4 | |||
| Feedback voltage | VFB | 0.8 | V | 4 | |||
| HSD peak current limit | ILIM_HSD | 5.5 | A | 4 | |||
| LSD valley current limit | ILIM_LSD | 5 | A | 4 | |||
| Switching frequency | FSW | 400 | kHz | VIN=12V, VOUT=5V | 4 | ||
| Minimum on-time | tON_MIN | 80 | ns | 4 | |||
| Internal soft-start time | tSS | 4 | ms | 4 | |||
| Output OVP threshold | VOVP | 110 | % | VOUT rising | 4 | ||
| Output OVP hysteresis | VOVP | 5 | % | Hysteresis | 4 | ||
| OCP hiccup wait time | THIC_W | 512 | Cycles | 4 | |||
| OCP hiccup restart time | THIC_R | 8192 | Cycles | 4 | |||
| Thermal shutdown threshold | TSD | 160 | °C | TJ rising | 4 | ||
| Thermal shutdown hysteresis | TSD | 25 | °C | Hysteresis | 4 | ||
| Junction to ambient thermal resistance (ESOP-8L) | RθJA | 42 | °C/W | 3 | |||
| Junction to case thermal resistance (ESOP-8L) | RθJC | 45.8 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
SCT9330STER - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
sct9330ster-etched.step/sct9330ster-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sct9330ster.step/sct9330ster.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
sct9330ster.step |
125 KB | You want the bare part, or you mark your own boards. |
sct9330ster-etched.step |
2.7 MB | You want the part with SCT9330STER already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 639 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SCT datasheet (21 pp, sha256
4aa041d83fa1ee6a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SCT9330STER
**SCT** · DC-DC Converters · ESOP-8
SCT9330STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_in | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF or greater ceramic capacitor between BOOT and SW to provide the boosted gate-drive voltage. |
| 2 | VIN | power_in | Power supply input, 3.8V to 28V operating range (absolute max 34V). Must be locally bypassed with a low-ESR ceramic capacitor close to the pin. |
| 3 | EN | input | Enable logic input; floating enables the device. Supports direct connection to VIN up to 34V; precision UVLO thresholds at 1.18V rising / 1.1V falling for programmable UVLO via a resistor divider. |
| 4 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 5 | FB | input | Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB; the device regulates FB to the internal 0.8V (±1%) reference. |
| 6 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 7 | NC | unconnected | Not connected. Leave floating or tie to GND per PCB layout preference. |
| 8 | SW | output | Switching node of the buck converter; the source of the high-side MOSFET and drain of the low-side MOSFET. Connect to the output inductor; absolute max range -0.3V to 34V. |
| 9 | GND (Thermal Pad) | power_in | Exposed thermal pad; serves as device GND and the primary heat-dissipation path. Must be soldered to the PCB ground plane for proper electrical operation and thermal performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
## Ordering variants
Same part, different packaging or reel option.
- `SCT9330STER`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (VIN) - electrical table | VIN | 3.8 | | 28 | V | | 3 |
| Shutdown current | ISD | | 1 | 3 | uA | EN=0, No load, VIN=12V | 3 |
| FSS jittering span | FJITTER | -6 | | 6 | % | | 4 |
| BST pin voltage | BST | -0.3 | | 38 | V | Over operating free-air temperature | 2 |
| VIN, SW, EN pin voltage | VIN, SW, EN | -0.3 | | 34 | V | Over operating free-air temperature | 2 |
| FB pin voltage | FB | -0.3 | | 5.5 | V | Over operating free-air temperature | 2 |
| Operating junction temperature | TJ | -40 | | 125 | C | Over operating free-air temperature | 2 |
| Storage temperature | TSTG | -65 | | 150 | C | | 2 |
| Input voltage range (VIN) | VIN | 3.8 | | 28 | V | Over operating free-air temperature range | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | Over operating free-air temperature range | 3 |
| Input UVLO threshold, VIN rising | VIN_UVLO | | 3.5 | | V | VIN rising | 3 |
| Input UVLO hysteresis | VIN_UVLO | | 420 | | mV | Hysteresis | 3 |
| Quiescent current | IQ | | 20 | | uA | EN=floating, No load, No switching. VIN=12V. BST-SW=5V | 3 |
| Enable high threshold | VEN_H | | 1.18 | | V | | 3 |
| Enable low threshold | VEN_L | | 1.1 | | V | | 3 |
| Enable pin input current | IEN | | 1.5 | | uA | EN=1V | 3 |
| Enable pin hysteresis current | IEN_HYS | | 4 | | uA | EN=1.5V | 3 |
| High side FET on-resistance | RDSON_H | | 85 | | mΩ | | 3 |
| Low side FET on-resistance | RDSON_L | | 48 | | mΩ | | 4 |
| Feedback voltage | VFB | | 0.8 | | V | | 4 |
| HSD peak current limit | ILIM_HSD | | 5.5 | | A | | 4 |
| LSD valley current limit | ILIM_LSD | | 5 | | A | | 4 |
| Switching frequency | FSW | | 400 | | kHz | VIN=12V, VOUT=5V | 4 |
| Minimum on-time | tON_MIN | | 80 | | ns | | 4 |
| Internal soft-start time | tSS | | 4 | | ms | | 4 |
| Output OVP threshold | VOVP | | 110 | | % | VOUT rising | 4 |
| Output OVP hysteresis | VOVP | | 5 | | % | Hysteresis | 4 |
| OCP hiccup wait time | THIC_W | | 512 | | Cycles | | 4 |
| OCP hiccup restart time | THIC_R | | 8192 | | Cycles | | 4 |
| Thermal shutdown threshold | TSD | | 160 | | °C | TJ rising | 4 |
| Thermal shutdown hysteresis | TSD | | 25 | | °C | Hysteresis | 4 |
| Junction to ambient thermal resistance (ESOP-8L) | RθJA | | 42 | | °C/W | | 3 |
| Junction to case thermal resistance (ESOP-8L) | RθJC | | 45.8 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `SCT9330STER`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `sct9330ster-etched.step` / `sct9330ster-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sct9330ster.step` / `sct9330ster.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`sct9330ster.step`](sct9330ster.step) | 125 KB | You want the bare part, or you mark your own boards. |
| [`sct9330ster-etched.step`](sct9330ster-etched.step) | 2.7 MB | You want the part with `SCT9330STER` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 639 faces against 152 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SCT datasheet](docs/sct9330ster-datasheet.pdf) (21 pp, sha256 `4aa041d83fa1ee6a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sct9330ster-datasheet.pdf)