main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sct9330ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sct9330ster: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md sct9330ster: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray
sct9330ster-etched.fit.json sct9330ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct9330ster-etched.glb sct9330ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct9330ster-etched.step sct9330ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct9330ster-hero.glb sct9330ster: hero from the plain model · Ray
sct9330ster-hero.overlay.json sct9330ster: hero from the plain model · Ray
sct9330ster.glb Publish 0.1.0 · Ray
sct9330ster.kicad_mod Publish 0.1.0 · Ray
sct9330ster.kicad_sym Publish 0.1.0 · Ray
sct9330ster.lbr Publish 0.1.0 · Ray
sct9330ster.step Publish 0.1.0 · Ray

SCT9330STER

SCT · DC-DC Converters · ESOP-8

SCT9330STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_in Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1µF or greater ceramic capacitor between BOOT and SW to provide the boosted gate-drive voltage.
2 VIN power_in Power supply input, 3.8V to 28V operating range (absolute max 34V). Must be locally bypassed with a low-ESR ceramic capacitor close to the pin.
3 EN input Enable logic input; floating enables the device. Supports direct connection to VIN up to 34V; precision UVLO thresholds at 1.18V rising / 1.1V falling for programmable UVLO via a resistor divider.
4 NC unconnected Not connected. Leave floating or tie to GND per PCB layout preference.
5 FB input Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB; the device regulates FB to the internal 0.8V (±1%) reference.
6 NC unconnected Not connected. Leave floating or tie to GND per PCB layout preference.
7 NC unconnected Not connected. Leave floating or tie to GND per PCB layout preference.
8 SW output Switching node of the buck converter; the source of the high-side MOSFET and drain of the low-side MOSFET. Connect to the output inductor; absolute max range -0.3V to 34V.
9 GND (Thermal Pad) power_in Exposed thermal pad; serves as device GND and the primary heat-dissipation path. Must be soldered to the PCB ground plane for proper electrical operation and thermal performance.

Key specifications

Parameter Value
Manufacturer SCT
Package ESOP-8
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • SCT9330STER

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (VIN) - electrical table VIN 3.8 28 V 3
Shutdown current ISD 1 3 uA EN=0, No load, VIN=12V 3
FSS jittering span FJITTER -6 6 % 4
BST pin voltage BST -0.3 38 V Over operating free-air temperature 2
VIN, SW, EN pin voltage VIN, SW, EN -0.3 34 V Over operating free-air temperature 2
FB pin voltage FB -0.3 5.5 V Over operating free-air temperature 2
Operating junction temperature TJ -40 125 C Over operating free-air temperature 2
Storage temperature TSTG -65 150 C 2
Input voltage range (VIN) VIN 3.8 28 V Over operating free-air temperature range 3
Operating junction temperature TJ -40 125 °C Over operating free-air temperature range 3
Input UVLO threshold, VIN rising VIN_UVLO 3.5 V VIN rising 3
Input UVLO hysteresis VIN_UVLO 420 mV Hysteresis 3
Quiescent current IQ 20 uA EN=floating, No load, No switching. VIN=12V. BST-SW=5V 3
Enable high threshold VEN_H 1.18 V 3
Enable low threshold VEN_L 1.1 V 3
Enable pin input current IEN 1.5 uA EN=1V 3
Enable pin hysteresis current IEN_HYS 4 uA EN=1.5V 3
High side FET on-resistance RDSON_H 85 mΩ 3
Low side FET on-resistance RDSON_L 48 mΩ 4
Feedback voltage VFB 0.8 V 4
HSD peak current limit ILIM_HSD 5.5 A 4
LSD valley current limit ILIM_LSD 5 A 4
Switching frequency FSW 400 kHz VIN=12V, VOUT=5V 4
Minimum on-time tON_MIN 80 ns 4
Internal soft-start time tSS 4 ms 4
Output OVP threshold VOVP 110 % VOUT rising 4
Output OVP hysteresis VOVP 5 % Hysteresis 4
OCP hiccup wait time THIC_W 512 Cycles 4
OCP hiccup restart time THIC_R 8192 Cycles 4
Thermal shutdown threshold TSD 160 °C TJ rising 4
Thermal shutdown hysteresis TSD 25 °C Hysteresis 4
Junction to ambient thermal resistance (ESOP-8L) RθJA 42 °C/W 3
Junction to case thermal resistance (ESOP-8L) RθJC 45.8 °C/W 3

CAD (KiCad official)

  • Symbol: SCT9330STER
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: sct9330ster-etched.step / sct9330ster-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sct9330ster.step / sct9330ster.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
sct9330ster.step 125 KB You want the bare part, or you mark your own boards.
sct9330ster-etched.step 2.7 MB You want the part with SCT9330STER already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 639 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SCT datasheet (21 pp, sha256 4aa041d83fa1ee6a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF