component
SCT9320STDR
Public Made by Adomby adom
SCT DC-DC Converters, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSCT9320STDR
SCT · DC-DC Converters · SOIC-8
SCT9320STDR from SCT, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Bootstrap supply for the high-side MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BOOT and SW; the cap is refreshed when the low-side FET turns on. |
| 2 | VIN | power_in | Power supply input, 3.8 V to 32 V. Must be locally bypassed with a low-ESR ceramic capacitor placed close to the pin. |
| 3 | EN | input | Enable logic input. Floating the pin enables the device; can be tied directly to VIN (rated up to 34 V). Precision enable thresholds: 1.18 V rising / 1.1 V falling for programmable UVLO with hysteresis. |
| 4 | NC | unconnected | Not connected. Leave floating or tie to a copper island for thermal relief; no internal connection. |
| 5 | FB | input | Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB to set the output voltage; the internal reference regulates FB to 0.8 V typical (0.792 V-0.808 V). |
| 6 | NC | unconnected | Not connected. Leave floating or tie to a copper island for thermal relief; no internal connection. |
| 7 | GND | power_in | Power ground return for the low-side MOSFET and controller. Must be soldered directly to the ground plane with a low-impedance connection. |
| 8 | SW | power_out | Switching node of the buck converter. Connect to the output inductor and to the BOOT capacitor. High dV/dt node; keep trace short and shielded to minimize EMI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
SCT9320STDR
CAD (KiCad official)
- Symbol:
SCT9320STDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sct9320stdr-etched.step/sct9320stdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sct9320stdr.step/sct9320stdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SCT datasheet (20 pp, sha256
3cd46ac0287aaae0, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).