main
Ray Publish 0.2.1 623cd3a
{
  "schema_version": 1,
  "type": "component",
  "slug": "sct2632aster",
  "title": "SCT2632ASTER",
  "brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "sct2632aster"
  ],
  "component": {
    "mpn": "SCT2632ASTER",
    "manufacturer": "SCT",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2111121930_SCT-SCT2632ASTER_C2916527.pdf",
    "parts": {
      "symbol": "sct2632aster.kicad_sym",
      "footprint": "sct2632aster.kicad_mod",
      "model_3d": "sct2632aster-hero.glb",
      "model_3d_plain": "sct2632aster.glb",
      "model_3d_step": "sct2632aster-etched.step",
      "model_3d_step_plain": "sct2632aster.step",
      "lbr": "sct2632aster.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "power_in",
        "description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1µF bootstrap capacitor from BOOT to SW; the cap charges when SW is low. Absolute max 71V (BOOT-SW max 6V)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 4.5V to 60V operating range. Connect a local bypass capacitor from VIN to GND; the path from VIN to the high-frequency bypass cap and GND must be as short as possible."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with internal pull-up (1µA/4µA). Pull below 1.05V to disable; float or tie to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H = 1.2V typ)."
      },
      {
        "number": "4",
        "name": "RT/CLK",
        "type": "bidirectional",
        "description": "Sets the internal oscillator switching frequency (100kHz-1.2MHz) via a resistor to GND, or accepts an external clock for PLL synchronization. If the external clock stops, the part automatically reverts to the resistor-programmed frequency. Typical pin voltage 0.5V; do not float or short to GND."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the trans-conductance error amplifier. External resistor divider from VOUT to GND to FB sets the output voltage; the device regulates FB to the internal 0.8V ±1% reference."
      },
      {
        "number": "6",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start programming pin. Connect a capacitor from SS to GND; an internal 3µA source charges CSS to program soft-start time (tSS = CSS × 0.8V / 3µA). Programmed soft-start time should be greater than 4ms."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return. Bond to the ground plane together with the thermal pad."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switching output - drain of the internal high-side MOSFET. Connect to the external power inductor. Absolute max range -1V to 65V."
      },
      {
        "number": "9",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Exposed die-attach pad for heat dissipation. Electrically connected to GND (pin 7) and must be soldered to the PCB ground plane for correct operation and optimized thermal performance (θJA = 42°C/W on the standard board)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2111121930_SCT-SCT2632ASTER_C2916527.pdf",
        "pages": 21,
        "sha256": "675137521e5fc015",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sct2632aster.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sct2632aster-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ff1bc8845b7f3d4587d0bcd69fa17ad42cbb48b778ead8c49fb4a1eb4fe44dbd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "SCT",
      "Package": "ESOP-8",
      "Category": "PMIC",
      "Pins": "9"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sct2632aster"
  ],
  "discovery_pitch": "SCT2632ASTER (SCT) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sct2632aster.kicad_sym",
    "sct2632aster.kicad_mod",
    "sct2632aster.glb",
    "sct2632aster.step",
    "sct2632aster-etched.step",
    "sct2632aster.lbr",
    "docs/hero.png",
    "docs/sct2632aster-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sct2632aster-hero.glb",
    "sct2632aster-hero.overlay.json"
  ],
  "visibility": "public",
  "variants": [
    {
      "mpn": "SCT2632ASTER",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T05:35:21.048Z",
  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}