main
Ray
Publish 0.2.1
623cd3a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182
{
"slug": "sct2632aster",
"version": "0.2.1",
"type": "component",
"description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"sct2632aster"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sct2632aster.kicad_sym",
"sct2632aster.kicad_mod",
"sct2632aster.glb",
"sct2632aster.step",
"sct2632aster-etched.step",
"sct2632aster.lbr",
"docs/hero.png",
"docs/sct2632aster-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sct2632aster-hero.glb",
"sct2632aster-hero.overlay.json"
],
"component": {
"mpn": "SCT2632ASTER",
"manufacturer": "SCT",
"package": "ESOP-8",
"pin_count": 9,
"category": "PMIC",
"subcategory": "DC-DC Converters",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2111121930_SCT-SCT2632ASTER_C2916527.pdf",
"parts": {
"symbol": "sct2632aster.kicad_sym",
"footprint": "sct2632aster.kicad_mod",
"model_3d": "sct2632aster-hero.glb",
"model_3d_plain": "sct2632aster.glb",
"model_3d_step": "sct2632aster-etched.step",
"model_3d_step_plain": "sct2632aster.step",
"lbr": "sct2632aster.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "BOOT",
"type": "power_in",
"description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1µF bootstrap capacitor from BOOT to SW; the cap charges when SW is low. Absolute max 71V (BOOT-SW max 6V)."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Input supply voltage, 4.5V to 60V operating range. Connect a local bypass capacitor from VIN to GND; the path from VIN to the high-frequency bypass cap and GND must be as short as possible."
},
{
"number": "3",
"name": "EN",
"type": "input",
"description": "Enable pin with internal pull-up (1µA/4µA). Pull below 1.05V to disable; float or tie to VIN to enable. A resistor divider from VIN to GND on EN programs the input UVLO threshold (VEN_H = 1.2V typ)."
},
{
"number": "4",
"name": "RT/CLK",
"type": "bidirectional",
"description": "Sets the internal oscillator switching frequency (100kHz-1.2MHz) via a resistor to GND, or accepts an external clock for PLL synchronization. If the external clock stops, the part automatically reverts to the resistor-programmed frequency. Typical pin voltage 0.5V; do not float or short to GND."
},
{
"number": "5",
"name": "FB",
"type": "input",
"description": "Inverting input of the trans-conductance error amplifier. External resistor divider from VOUT to GND to FB sets the output voltage; the device regulates FB to the internal 0.8V ±1% reference."
},
{
"number": "6",
"name": "SS",
"type": "passive",
"description": "Soft-start programming pin. Connect a capacitor from SS to GND; an internal 3µA source charges CSS to program soft-start time (tSS = CSS × 0.8V / 3µA). Programmed soft-start time should be greater than 4ms."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground return. Bond to the ground plane together with the thermal pad."
},
{
"number": "8",
"name": "SW",
"type": "power_out",
"description": "Regulator switching output - drain of the internal high-side MOSFET. Connect to the external power inductor. Absolute max range -1V to 65V."
},
{
"number": "9",
"name": "Thermal Pad",
"type": "passive",
"description": "Exposed die-attach pad for heat dissipation. Electrically connected to GND (pin 7) and must be soldered to the PCB ground plane for correct operation and optimized thermal performance (θJA = 42°C/W on the standard board)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2111121930_SCT-SCT2632ASTER_C2916527.pdf",
"pages": 21,
"sha256": "675137521e5fc015",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sct2632aster.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sct2632aster-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "ff1bc8845b7f3d4587d0bcd69fa17ad42cbb48b778ead8c49fb4a1eb4fe44dbd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "SCT2632ASTER",
"brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "SCT",
"Package": "ESOP-8",
"Category": "PMIC",
"Pins": "9"
}
},
"discovery_triggers": [
"sct2632aster"
],
"discovery_pitch": "SCT2632ASTER (SCT) component page with datasheet-verified CAD.",
"visibility": "public"
}