main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sct2452ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sct2452ster: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md sct2452ster: specified limits as data (metadata.characteristics, 26 rows from the datasheet) · Ray
sct2452ster-etched.fit.json sct2452ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2452ster-etched.glb sct2452ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2452ster-etched.step sct2452ster: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sct2452ster-hero.glb sct2452ster: hero from the plain model · Ray
sct2452ster-hero.overlay.json sct2452ster: hero from the plain model · Ray
sct2452ster.glb Publish 0.1.0 · Ray
sct2452ster.kicad_mod Publish 0.1.0 · Ray
sct2452ster.kicad_sym Publish 0.1.0 · Ray
sct2452ster.lbr Publish 0.1.0 · Ray
sct2452ster.step Publish 0.1.0 · Ray

SCT2452STER

SCT · DC-DC Converters · ESOP-8

SCT2452STER from SCT, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_in Bootstrap supply for high-side power MOSFET gate driver. Connect a 0.1µF capacitor between BOOT and SW; the bootstrap cap is charged when the low-side MOSFET is on or SW is low. BOOT-SW UVLO threshold ≈ 2.36V.
2 VIN power_in Input supply voltage, 3.8V to 36V (42V transient max). Connect a local high-frequency bypass capacitor from VIN to GND as close as possible to the pin.
3 EN input Enable input with internal pull-up current source (~1.5µA at 1V). Pull below 1.1V to disable the converter; float or tie to VIN to enable. A VIN-to-GND resistor divider on EN sets a programmable input UVLO threshold (VEN_H ≈ 1.18V).
4 RT/CLK bidirectional Sets internal oscillator frequency or accepts an external clock. Resistor to GND programs Fsw from 100kHz to 1.1MHz (e.g. 200kΩ ≈ 500kHz); alternatively drive with an external clock (100kHz-1.1MHz) for PLL synchronization. Reverts to resistor-programmed frequency if the external clock stops.
5 FB input Inverting input of the transconductance error amplifier. Connect a resistor divider from VOUT to FB to GND; the loop regulates FB to VREF = 0.8V (typ, ±1%). Overvoltage protection trips at ~110% of VREF.
6 SS passive Soft-start programming pin. Connect a capacitor from SS to GND; internal ~3µA source current charges it to set the output voltage ramp time.
7 GND power_in Device ground. Common return for input bypass, output feedback, and control-circuit references.
8 SW power_out Switch node - regulator switching output. Connect to the external power inductor. Absolute range -1V to 38V; also the bootstrap capacitor return for the high-side driver.
9 Thermal Pad power_in Exposed thermal pad on the ESOP-8 package. Electrically connected to GND (pin 7). Must be soldered to the PCB ground plane for proper thermal performance.

Key specifications

Parameter Value
Manufacturer SCT
Package ESOP-8
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • SCT2452STER

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input voltage range VIN 3.8 36 V 3
VOUT Output voltage range VOUT 0.8 36 V 3
TJ Operating junction temperature TJ -40 125 °C 3
VIN VIN -0.3 38 V 2
VIN Transient (300ms) VIN Transient (300ms) -0.3 42 V 2
EN EN -0.3 38 V 2
BOOT BOOT -0.3 44 V 2
SW SW -1 38 V 2
BOOT-SW BOOT-SW -0.3 6 V 2
SS, FB, RT/CLK SS, FB, RT/CLK -0.3 6 V 2
Operating junction temperature TJ -40 150 °C 2
Storage temperature TSTG -65 150 °C 2
Junction to ambient thermal resistance (SOP-8L) RθJA 42 °C/W 3
Junction to case thermal resistance (SOP-8L) RθJC 45.8 °C/W 3
Operating input voltage VIN 3.8 36 V 4
Input UVLO Threshold VIN_UVLO 3.5 3.7 V VIN rising 4
Shutdown current from VIN pin ISHDN 1 3 μA EN=0, no load 4
Reference voltage of FB VREF 0.792 0.8 0.808 V 4
High-side power MOSFET peak current limit threshold ILIM_HS 6.8 8 9.2 A 4
Enable high threshold VEN_H 1.18 1.25 V 4
Enable low threshold VEN_L 1.03 1.1 V 4
Enable pin pull-up current IEN_L 1 1.5 2 μA EN=1V 4
Frequency range using RT mode FRANGE_RT 100 1100 kHz 4
Switching frequency FSW 450 500 550 kHz RRT=200 kΩ(1%) 4
Frequency range using CLK mode FRANGE_CLK 100 1100 kHz 4
Frequency spread spectrum in percentage of Fsw FJITTER -6 6 % 4

CAD (KiCad official)

  • Symbol: SCT2452STER
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: sct2452ster-etched.step / sct2452ster-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sct2452ster.step / sct2452ster.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SCT datasheet (22 pp, sha256 a97363c67f20b5f7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF