main
Ray Publish 0.1.1 c7e38a4
{
  "schema_version": 1,
  "type": "component",
  "slug": "sct2450qster",
  "title": "SCT2450QSTER",
  "brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "sct2450qster"
  ],
  "component": {
    "mpn": "SCT2450QSTER",
    "manufacturer": "SCT",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121430_SCT-SCT2450QSTER_C2929524.pdf",
    "parts": {
      "symbol": "sct2450qster.kicad_sym",
      "footprint": "sct2450qster.kicad_mod",
      "model_3d": "sct2450qster-hero.glb",
      "model_3d_plain": "sct2450qster.glb",
      "model_3d_step": "sct2450qster-etched.step",
      "model_3d_step_plain": "sct2450qster.step",
      "lbr": "sct2450qster.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "passive",
        "description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1 µF bootstrap capacitor from BOOT to SW. The bootstrap capacitor is charged when the low-side MOSFET is on or SW is low. Absolute max 44 V (BOOT-SW max 6 V)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 3.8 V to 36 V operating (absolute max 38 V, 42 V transient 300 ms). Connect a local high-frequency bypass capacitor from VIN to GND as short as possible."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin to the regulator with internal pull-up current source (1.5 µA typ at 1 V). Pull below 1.1 V to disable the converter; float or tie to VIN to enable. A resistor divider from VIN to GND to EN can program the input UVLO threshold. Enable high threshold 1.18 V typ."
      },
      {
        "number": "4",
        "name": "RT/CLK",
        "type": "bidirectional",
        "description": "Frequency set / external clock input. Connect a resistor from RT/CLK to GND to set the internal oscillator frequency (100 kHz to 2.2 MHz). Alternatively drive with an external clock (100 kHz-2.2 MHz); the internal PLL synchronizes to the external clock and reverts to resistor-set frequency if clock edges stop."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the trans-conductance error amplifier. Tap an external resistor divider from VOUT to GND to set the output voltage; the device regulates FB to the internal reference of 0.8 V (±1%) typical."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output. Connect a frequency loop compensation network (typically series R + C, optional parallel C) from COMP to GND. Clamp voltages: high 3 V, low 0.4 V."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switching node. Connect SW to the external power inductor. This is the switch node between the integrated high-side (48 mΩ) and low-side (23 mΩ) power MOSFETs. Absolute max range -1 V to 38 V."
      },
      {
        "number": "9",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "Exposed thermal pad on the ESOP-8 package. Heat dissipation path of the die; electrically connected to GND. Must be soldered to the PCB ground plane for proper operation and optimized thermal performance (θJA ≈ 42 °C/W, θJC ≈ 45.8 °C/W)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121430_SCT-SCT2450QSTER_C2929524.pdf",
        "pages": 22,
        "sha256": "74bb039979bfaa07",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sct2450qster.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sct2450qster-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3efc516a9dd8aa12bfe72badd03fcaec3fdfdf74426a909ab5696a8bb496ad86",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "SCT",
      "Package": "ESOP-8",
      "Category": "PMIC",
      "Pins": "9"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sct2450qster"
  ],
  "discovery_pitch": "SCT2450QSTER (SCT) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sct2450qster.kicad_sym",
    "sct2450qster.kicad_mod",
    "sct2450qster.glb",
    "sct2450qster.step",
    "sct2450qster.lbr",
    "docs/hero.png",
    "docs/sct2450qster-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sct2450qster-etched.step",
    "sct2450qster-hero.glb",
    "sct2450qster-hero.overlay.json"
  ],
  "visibility": "public",
  "variants": [
    {
      "mpn": "SCT2450QSTER",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T05:34:22.665Z",
  "description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}