main
Ray
Publish 0.2.1
9504645
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182
{
"slug": "sct2432ster",
"version": "0.2.1",
"type": "component",
"description": "SCT DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"sct2432ster"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sct2432ster.kicad_sym",
"sct2432ster.kicad_mod",
"sct2432ster.glb",
"sct2432ster.step",
"sct2432ster-etched.step",
"sct2432ster.lbr",
"docs/hero.png",
"docs/sct2432ster-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sct2432ster-hero.glb",
"sct2432ster-hero.overlay.json"
],
"component": {
"mpn": "SCT2432STER",
"manufacturer": "SCT",
"package": "ESOP-8",
"pin_count": 9,
"category": "PMIC",
"subcategory": "DC-DC Converters",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c800da8a9f9843efeecaf8b13b2bfff9.pdf",
"parts": {
"symbol": "sct2432ster.kicad_sym",
"footprint": "sct2432ster.kicad_mod",
"model_3d": "sct2432ster-hero.glb",
"model_3d_plain": "sct2432ster.glb",
"model_3d_step": "sct2432ster-etched.step",
"model_3d_step_plain": "sct2432ster.step",
"lbr": "sct2432ster.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "BOOT",
"type": "passive",
"description": "Power supply bias for the high-side power MOSFET gate driver. Connect a 0.1µF bootstrap capacitor from BOOT to SW. Capacitor is charged when the low-side power MOSFET is on or SW voltage is low. Absolute max 46V; BOOT-SW max 6V; BOOT-SW UVLO threshold ~2.36V."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Input supply voltage, 3.8V to 40V operating range (absolute max 42V). Connect a local bypass capacitor from VIN to GND with the shortest possible path from VIN to the high-frequency bypass capacitor and GND."
},
{
"number": "3",
"name": "EN",
"type": "input",
"description": "Enable pin to the regulator with internal pull-up current source (1.5µA at 1V, 5.5µA at 1.5V). Pull below 1.1V to disable the converter; float or connect to VIN to enable. Enable rising threshold ~1.18V. Tap of a VIN-to-GND resistor divider on EN can set the input UVLO threshold. Absolute max 42V."
},
{
"number": "4",
"name": "RT/CLK",
"type": "bidirectional",
"description": "Sets internal oscillator switching frequency or accepts an external synchronization clock. Connect a resistor from this pin to GND to program frequency between 300kHz and 2.2MHz (RT[kΩ] = 100000 / fsw[kHz]); or drive with an external clock (high >2V, low <0.4V, pulse >80ns) and the internal PLL will lock. Must not be left floating or shorted to GND. Absolute max 6V."
},
{
"number": "5",
"name": "FB",
"type": "input",
"description": "Inverting input of the trans-conductance error amplifier. Connect to the tap of the output-to-GND feedback resistor divider that programs the output voltage. Device regulates FB to the internal 0.8V (±1%) reference. Overvoltage protection trips at ~110% of VREF. Absolute max 6V."
},
{
"number": "6",
"name": "SS",
"type": "passive",
"description": "Soft-start programming pin. Connect a ceramic capacitor from SS to GND to set soft-start time; an internal 3µA current source pulls SS toward VCC. Css = tss * 3µA / 0.8V; programmed soft-start time should be greater than 4ms. Absolute max 6V."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground. Must be tied to the PCB ground plane together with the exposed thermal pad."
},
{
"number": "8",
"name": "SW",
"type": "power_out",
"description": "Regulator switching node; source of the internal high-side MOSFET and drain of the low-side MOSFET. Connect to an external power inductor to feed the LC output filter. Absolute max 42V."
},
{
"number": "9",
"name": "Thermal Pad",
"type": "power_in",
"description": "Exposed thermal pad on the die back - heat dissipation path. Must be electrically connected to the GND pin and soldered to the PCB ground plane for proper operation and optimized thermal performance (RθJA ≈ 42°C/W)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/c800da8a9f9843efeecaf8b13b2bfff9.pdf",
"pages": 22,
"sha256": "cdce43b0bc463e30",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sct2432ster.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sct2432ster-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8efb8dabcd202db61c32e1fad4bfce59f79eb3dd4a0c6a1a5f0f0b5db8e60776",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "SCT2432STER",
"brief": "SCT DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "SCT",
"Package": "ESOP-8",
"Category": "PMIC",
"Pins": "9"
}
},
"discovery_triggers": [
"sct2432ster"
],
"discovery_pitch": "SCT2432STER (SCT) component page with datasheet-verified CAD.",
"visibility": "public"
}