main
Ray
sct2230tvbr: specified limits as data (metadata.characteristics, 28 rows from the datasheet)
3bb5ca1
SCT2230TVBR
SCT · DC-DC Converters · TSOT-23-6L
SCT2230TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground. Return for both the internal power MOSFETs and the control circuitry; must be soldered directly to the PCB ground plane for proper thermal and electrical performance. |
| 2 | SW | power_out | Power switching output. Common node of the internal high-side and low-side MOSFETs; connect the external inductor from SW to the output LC filter. Also serves as the low-side reference for the bootstrap capacitor between BST and SW that powers the high-side gate driver. |
| 3 | VIN | power_in | Power supply input, 4.2 V to 17 V (absolute max 20 V). Supplies both the IC bias and the step-down converter power stage. Bypass to GND with a low-ESR ceramic capacitor (typically 10 µF plus a local 0.1 µF) placed close to the pin to filter switching noise. |
| 4 | FB | input | Buck converter output-voltage feedback sense input. Connect an external resistor divider from VOUT to FB (and FB to GND); the loop regulates FB to the internal 0.8 V (typ) reference to program the output voltage over the 0.8 V-7 V range. |
| 5 | EN | input | Enable / programmable UVLO logic input. Precision thresholds 1.18 V rising / 1.1 V falling; an internal 1.5 µA pull-up lets a floating pin auto-enable the device, and a 6.8 µA hysteresis current source allows a resistor divider from VIN to program the input UVLO. Can be tied directly to VIN. High-voltage tolerant up to 6.5 V. |
| 6 | BST | power_in | Bootstrap supply for the high-side power MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW; an internal regulator refreshes this capacitor when the low-side FET is on. BST-to-SW UVLO is 2.2 V rising with 200 mV hysteresis (absolute max VSW+6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | TSOT-23-6L |
| Category | PMIC |
| Pins | 6 |
Ordering variants
SCT2230TVBRSCT2230TVBRTVASCT2230TVBRTVAR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input voltage range (recommended) | VIN | 4.2 | 17 | V | 3 | ||
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 3 | ||
| VIN Supply Voltage (absolute maximum) | VIN | -0.3 | 20 | V | 2 | ||
| VSW Switch Node Voltage (absolute maximum) | VSW | -1 | V | Printed as -1 to VIN+0.3; upper bound is relative to VIN, not numeric | 2 | ||
| VFB Feedback Voltage (absolute maximum) | VFB | -0.3 | 6.5 | V | 2 | ||
| VEN Enable/UVLO Voltage (absolute maximum) | VEN | -0.3 | 6.5 | V | 2 | ||
| TJ Operating junction temperature (absolute maximum) | TJ | -40 | 125 | °C | 2 | ||
| TSTG Storage temperature (absolute maximum) | TSTG | -65 | 150 | °C | 2 | ||
| Feedback Voltage | VFB | 0.78 | 0.8 | 0.82 | V | 4 | |
| Enable high threshold | VEN_H | 1.18 | 1.25 | V | 4 | ||
| Enable low threshold | VEN_L | 1.03 | 1.1 | V | 4 | ||
| Input UVLO (VIN rising) | VIN_UVLO | 4 | 4.15 | V | VIN rising | 4 | |
| Shutdown current | ISD | 1.5 | 5 | uA | EN=0, No load, VIN=12V | 4 | |
| Enable pin input current | IEN | 1 | 1.5 | 2 | uA | EN=1V | 4 |
| LSD valley current limit | ILIM_LSD | 3.2 | 3.7 | 4.2 | A | 4 | |
| Quiescent current | IQ | 155 | uA | EN=2V, No load, No switching. VIN=12V. BST-SW=5V | 4 | ||
| Input UVLO hysteresis | VIN_UVLO | 300 | mV | 4 | |||
| Enable pin hysteresis current | IEN_HYS | 6.8 | uA | EN=1.5V | 4 | ||
| High side FET on-resistance | RDSON_H | 75 | mΩ | 4 | |||
| Low side FET on-resistance | RDSON_L | 45 | mΩ | 4 | |||
| Switching frequency | FSW | 750 | kHz | VIN=12V, VOUT=5V | 4 | ||
| Minimum on-time | tON_MIN | 90 | ns | 4 | |||
| Minimum off-time | tOFF_MIN | 220 | ns | 4 | |||
| Internal soft-start time | tSS | 2.5 | ms | 4 | |||
| Thermal shutdown threshold | TSD | 160 | °C | TJ rising | 4 | ||
| Thermal shutdown hysteresis | TSD | 20 | 4 | ||||
| Junction to ambient thermal resistance (TSOT23-6) | RθJA | 88 | °C/W | TSOT23-6 package | 3 | ||
| Junction to case thermal resistance (TSOT23-6) | RθJC | 12 | °C/W | TSOT23-6 package | 3 |
CAD (KiCad official)
- Symbol:
SCT2230TVBR - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
sct2230tvbr-etched.step/sct2230tvbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sct2230tvbr.step/sct2230tvbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SCT datasheet (None pp, sha256
105d6d912e4337ae, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SCT2230TVBR
**SCT** · DC-DC Converters · TSOT-23-6L
SCT2230TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground. Return for both the internal power MOSFETs and the control circuitry; must be soldered directly to the PCB ground plane for proper thermal and electrical performance. |
| 2 | SW | power_out | Power switching output. Common node of the internal high-side and low-side MOSFETs; connect the external inductor from SW to the output LC filter. Also serves as the low-side reference for the bootstrap capacitor between BST and SW that powers the high-side gate driver. |
| 3 | VIN | power_in | Power supply input, 4.2 V to 17 V (absolute max 20 V). Supplies both the IC bias and the step-down converter power stage. Bypass to GND with a low-ESR ceramic capacitor (typically 10 µF plus a local 0.1 µF) placed close to the pin to filter switching noise. |
| 4 | FB | input | Buck converter output-voltage feedback sense input. Connect an external resistor divider from VOUT to FB (and FB to GND); the loop regulates FB to the internal 0.8 V (typ) reference to program the output voltage over the 0.8 V-7 V range. |
| 5 | EN | input | Enable / programmable UVLO logic input. Precision thresholds 1.18 V rising / 1.1 V falling; an internal 1.5 µA pull-up lets a floating pin auto-enable the device, and a 6.8 µA hysteresis current source allows a resistor divider from VIN to program the input UVLO. Can be tied directly to VIN. High-voltage tolerant up to 6.5 V. |
| 6 | BST | power_in | Bootstrap supply for the high-side power MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW; an internal regulator refreshes this capacitor when the low-side FET is on. BST-to-SW UVLO is 2.2 V rising with 200 mV hysteresis (absolute max VSW+6 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | TSOT-23-6L |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
- `SCT2230TVBR`
- `SCT2230TVBRTVA`
- `SCT2230TVBRTVAR`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input voltage range (recommended) | VIN | 4.2 | | 17 | V | | 3 |
| Operating junction temperature (recommended) | TJ | -40 | | 125 | °C | | 3 |
| VIN Supply Voltage (absolute maximum) | VIN | -0.3 | | 20 | V | | 2 |
| VSW Switch Node Voltage (absolute maximum) | VSW | -1 | | | V | Printed as -1 to VIN+0.3; upper bound is relative to VIN, not numeric | 2 |
| VFB Feedback Voltage (absolute maximum) | VFB | -0.3 | | 6.5 | V | | 2 |
| VEN Enable/UVLO Voltage (absolute maximum) | VEN | -0.3 | | 6.5 | V | | 2 |
| TJ Operating junction temperature (absolute maximum) | TJ | -40 | | 125 | °C | | 2 |
| TSTG Storage temperature (absolute maximum) | TSTG | -65 | | 150 | °C | | 2 |
| Feedback Voltage | VFB | 0.78 | 0.8 | 0.82 | V | | 4 |
| Enable high threshold | VEN_H | 1.18 | | 1.25 | V | | 4 |
| Enable low threshold | VEN_L | 1.03 | | 1.1 | V | | 4 |
| Input UVLO (VIN rising) | VIN_UVLO | 4 | | 4.15 | V | VIN rising | 4 |
| Shutdown current | ISD | 1.5 | | 5 | uA | EN=0, No load, VIN=12V | 4 |
| Enable pin input current | IEN | 1 | 1.5 | 2 | uA | EN=1V | 4 |
| LSD valley current limit | ILIM_LSD | 3.2 | 3.7 | 4.2 | A | | 4 |
| Quiescent current | IQ | | 155 | | uA | EN=2V, No load, No switching. VIN=12V. BST-SW=5V | 4 |
| Input UVLO hysteresis | VIN_UVLO | | 300 | | mV | | 4 |
| Enable pin hysteresis current | IEN_HYS | | 6.8 | | uA | EN=1.5V | 4 |
| High side FET on-resistance | RDSON_H | | 75 | | mΩ | | 4 |
| Low side FET on-resistance | RDSON_L | | 45 | | mΩ | | 4 |
| Switching frequency | FSW | | 750 | | kHz | VIN=12V, VOUT=5V | 4 |
| Minimum on-time | tON_MIN | | 90 | | ns | | 4 |
| Minimum off-time | tOFF_MIN | | 220 | | ns | | 4 |
| Internal soft-start time | tSS | | 2.5 | | ms | | 4 |
| Thermal shutdown threshold | TSD | | 160 | | °C | TJ rising | 4 |
| Thermal shutdown hysteresis | TSD | | 20 | | | | 4 |
| Junction to ambient thermal resistance (TSOT23-6) | RθJA | | 88 | | °C/W | TSOT23-6 package | 3 |
| Junction to case thermal resistance (TSOT23-6) | RθJC | | 12 | | °C/W | TSOT23-6 package | 3 |
## CAD (KiCad official)
- Symbol: `SCT2230TVBR`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `sct2230tvbr-etched.step` / `sct2230tvbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sct2230tvbr.step` / `sct2230tvbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SCT datasheet](docs/sct2230tvbr-datasheet.pdf) (None pp, sha256 `105d6d912e4337ae`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sct2230tvbr-datasheet.pdf)