Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

SCT2230TVBR

SCT · DC-DC Converters · TSOT-23-6L

SCT2230TVBR from SCT, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground. Return for both the internal power MOSFETs and the control circuitry; must be soldered directly to the PCB ground plane for proper thermal and electrical performance.
2 SW power_out Power switching output. Common node of the internal high-side and low-side MOSFETs; connect the external inductor from SW to the output LC filter. Also serves as the low-side reference for the bootstrap capacitor between BST and SW that powers the high-side gate driver.
3 VIN power_in Power supply input, 4.2 V to 17 V (absolute max 20 V). Supplies both the IC bias and the step-down converter power stage. Bypass to GND with a low-ESR ceramic capacitor (typically 10 µF plus a local 0.1 µF) placed close to the pin to filter switching noise.
4 FB input Buck converter output-voltage feedback sense input. Connect an external resistor divider from VOUT to FB (and FB to GND); the loop regulates FB to the internal 0.8 V (typ) reference to program the output voltage over the 0.8 V-7 V range.
5 EN input Enable / programmable UVLO logic input. Precision thresholds 1.18 V rising / 1.1 V falling; an internal 1.5 µA pull-up lets a floating pin auto-enable the device, and a 6.8 µA hysteresis current source allows a resistor divider from VIN to program the input UVLO. Can be tied directly to VIN. High-voltage tolerant up to 6.5 V.
6 BST power_in Bootstrap supply for the high-side power MOSFET gate driver. Connect a 0.1 µF (or greater) ceramic capacitor between BST and SW; an internal regulator refreshes this capacitor when the low-side FET is on. BST-to-SW UVLO is 2.2 V rising with 200 mV hysteresis (absolute max VSW+6 V).

Key specifications

Parameter Value
Manufacturer SCT
Package TSOT-23-6L
Category PMIC
Pins 6

Ordering variants

  • SCT2230TVBR
  • SCT2230TVBRTVA
  • SCT2230TVBRTVAR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input voltage range (recommended) VIN 4.2 17 V 3
Operating junction temperature (recommended) TJ -40 125 °C 3
VIN Supply Voltage (absolute maximum) VIN -0.3 20 V 2
VSW Switch Node Voltage (absolute maximum) VSW -1 V Printed as -1 to VIN+0.3; upper bound is relative to VIN, not numeric 2
VFB Feedback Voltage (absolute maximum) VFB -0.3 6.5 V 2
VEN Enable/UVLO Voltage (absolute maximum) VEN -0.3 6.5 V 2
TJ Operating junction temperature (absolute maximum) TJ -40 125 °C 2
TSTG Storage temperature (absolute maximum) TSTG -65 150 °C 2
Feedback Voltage VFB 0.78 0.8 0.82 V 4
Enable high threshold VEN_H 1.18 1.25 V 4
Enable low threshold VEN_L 1.03 1.1 V 4
Input UVLO (VIN rising) VIN_UVLO 4 4.15 V VIN rising 4
Shutdown current ISD 1.5 5 uA EN=0, No load, VIN=12V 4
Enable pin input current IEN 1 1.5 2 uA EN=1V 4
LSD valley current limit ILIM_LSD 3.2 3.7 4.2 A 4
Quiescent current IQ 155 uA EN=2V, No load, No switching. VIN=12V. BST-SW=5V 4
Input UVLO hysteresis VIN_UVLO 300 mV 4
Enable pin hysteresis current IEN_HYS 6.8 uA EN=1.5V 4
High side FET on-resistance RDSON_H 75 mΩ 4
Low side FET on-resistance RDSON_L 45 mΩ 4
Switching frequency FSW 750 kHz VIN=12V, VOUT=5V 4
Minimum on-time tON_MIN 90 ns 4
Minimum off-time tOFF_MIN 220 ns 4
Internal soft-start time tSS 2.5 ms 4
Thermal shutdown threshold TSD 160 °C TJ rising 4
Thermal shutdown hysteresis TSD 20 4
Junction to ambient thermal resistance (TSOT23-6) RθJA 88 °C/W TSOT23-6 package 3
Junction to case thermal resistance (TSOT23-6) RθJC 12 °C/W TSOT23-6 package 3

CAD (KiCad official)

  • Symbol: SCT2230TVBR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: sct2230tvbr-etched.step / sct2230tvbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sct2230tvbr.step / sct2230tvbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SCT datasheet (None pp, sha256 105d6d912e4337ae, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF