main
History Download
Ray Publish 0.1.0 1b97eda

SC95F8673M28U

SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · SOP-28

SC95F8673M28U from SOC(Shenzhen SinOne Microelectronics), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; the device operates from 2.0V to 5.5V.
2 P1.0/CMOD bidirectional GPIO P1.0; CMOD is the touch key external capacitor connection.
3 VSS power_in Ground pin.
4 P5.0/OSCI bidirectional GPIO P5.0; OSCI is the external crystal oscillator input when the external crystal is enabled.
5 P5.1/OSCO bidirectional GPIO P5.1; OSCO is the external crystal oscillator output when the external crystal is enabled.
6 P1.1/INT01/TK22/RST bidirectional GPIO P1.1; INT01 is external interrupt 0 input 1, TK22 is touch channel 22, and RST is the reset pin when selected by Code Option.
7 P1.2/INT02/T0/RX0/TK21/tCK bidirectional GPIO P1.2; INT02 is external interrupt 0 input 2, T0 is counter 0 external input, RX0 is UART0 receive, and tCK is the programming/emulation clock line; avoid TK21 if TK debug is used.
8 P1.3/INT03/T1/TX0/TK20/tDIO bidirectional GPIO P1.3; INT03 is external interrupt 0 input 3, T1 is counter 1 external input, TX0 is UART0 transmit, and tDIO is the programming/emulation data line; avoid TK20 if TK debug is used.
9 P1.4/INT10/USRX2/AIN9/TK19 bidirectional GPIO P1.4; INT10 is external interrupt 1 input 0, USRX2 is USCI2 MISO/RX, AIN9 is ADC input channel 9, and TK19 is touch channel 19.
10 P1.5/INT11/USTX2/AIN8/TK18 bidirectional GPIO P1.5; INT11 is external interrupt 1 input 1, USTX2 is USCI2 MOSI/SDA/TX, AIN8 is ADC input channel 8, and TK18 is touch channel 18.
11 P1.6/INT12/AIN7/TK17 bidirectional GPIO P1.6; INT12 is external interrupt 1 input 2, AIN7 is ADC input channel 7, and TK17 is touch channel 17.
12 P1.7/IN13/AIN6/TK16 bidirectional GPIO P1.7; INT13 (printed as IN13) is external interrupt 1 input 3, AIN6 is ADC input channel 6, and TK16 is touch channel 16.
13 P2.7/PWM07/AIN5/TK15 bidirectional GPIO P2.7; PWM07 is a PWM output, AIN5 is ADC input channel 5, and TK15 is touch channel 15.
14 P2.6/USCK2/PWM06/AIN4/TK14 bidirectional GPIO P2.6; USCK2 is USCI2 SCK, PWM06 is a PWM output, AIN4 is ADC input channel 4, and TK14 is touch channel 14.
15 P2.5/T4/PWM40/PWM05/AIN3/TK13 bidirectional GPIO P2.5; T4 is counter 4 external input, PWM40 and PWM05 are PWM outputs, AIN3 is ADC input channel 3, and TK13 is touch channel 13.
16 P2.4/T4EX/PWM41/PWM04/AIN2/TK12 bidirectional GPIO P2.4; T4EX is the Timer4 external capture input, PWM41 and PWM04 are PWM outputs, AIN2 is ADC input channel 2, and TK12 is touch channel 12.
17 P2.3/AIN1/TK11 bidirectional GPIO P2.3; AIN1 is ADC input channel 1, and TK11 is touch channel 11.
18 P2.2/AIN0/TK10 bidirectional GPIO P2.2; AIN0 is ADC input channel 0, and TK10 is touch channel 10.
19 P2.1/INT25/AIN11/USRX0/TK9 bidirectional GPIO P2.1; INT25 is external interrupt 2 input 5, AIN11 is ADC input channel 11, USRX0 is USCI0 MISO/RX, and TK9 is touch channel 9.
20 P2.0/INT24/AIN10/USTX0/TK8 bidirectional GPIO P2.0; INT24 is external interrupt 2 input 4, AIN10 is ADC input channel 10, USTX0 is USCI0 MOSI/SDA/TX, and TK8 is touch channel 8.
21 P0.7/INT23/T2/PWM20/TK7 bidirectional GPIO P0.7; INT23 is external interrupt 2 input 3, T2 is counter 2 external input, PWM20 is a PWM output, and TK7 is touch channel 7.
22 P0.6/INT22/T2EX/PWM21/TK6 bidirectional GPIO P0.6; INT22 is external interrupt 2 input 2, T2EX is the Timer2 external capture input, PWM21 is a PWM output, and TK6 is touch channel 6.
23 P0.5/INT21/USCK0/TK5 bidirectional GPIO P0.5; INT21 is external interrupt 2 input 1, USCK0 is USCI0 SCK, and TK5 is touch channel 5.
24 P0.4/INT20/USCK1/FLT/TK4 bidirectional GPIO P0.4; INT20 is external interrupt 2 input 0, USCK1 is USCI1 SCK, FLT is the PWM fault detection input, and TK4 is touch channel 4.
25 P0.3/USTX1/PWM03/TK3 bidirectional GPIO P0.3; USTX1 is USCI1 MOSI/SDA/TX, PWM03 is a PWM output, and TK3 is touch channel 3.
26 P0.2/USRX1/PWM02/TK2 bidirectional GPIO P0.2; USRX1 is USCI1 MISO/RX, PWM02 is a PWM output, and TK2 is touch channel 2.
27 P0.1/T3/PWM30/PWM01/TK1 bidirectional GPIO P0.1; T3 is counter 3 external input, PWM30 and PWM01 are PWM outputs, and TK1 is touch channel 1.
28 P0.0/T3EX/PWM31/PWM00/TK0 bidirectional GPIO P0.0; T3EX is the Timer3 external capture input, PWM31 and PWM00 are PWM outputs, and TK0 is touch channel 0.

Key specifications

Parameter Value
Manufacturer SOC(Shenzhen SinOne Microelectronics)
Package SOP-28
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC supply voltage (VDD/VSS) VDD/VSS -0.3 5.5 V 110
Voltage on any pin (input/output) -0.3 V 110
Operating ambient temperature (TA) TA -40 105 ℃ 110
Storage temperature TSTG -55 125 ℃ 110
Current through VDD IVDD 200 mA 110
Current through VSS IVSS 200 mA 110
Operating supply voltage (VDD) VDD 2 5.5 V System clock frequency 32MHz 110
Operating ambient temperature (TA) TA -40 105 ℃ 110
Erase/write cycles (Flash) NEND 100000 Cycles 110
Data retention time (Flash) TDR 100 Years TA = +25℃ 110
Full chip erase time TErase 30 40 ms TA = +25℃ 110
Base Timer operating current IBTM 1.3 3 μA VDD=5V, TA=+25℃; BTMFS[3:0]=1000; one interrupt every 4.0 s 110
WDT current IWDT 1.3 3 μA VDD=5V, TA=+25℃; WDTCKS[2:0]=000; WDT overflow 500ms 110
High-sensitivity touch key operating current (5V) ITK1 0.8 1.2 mA VDD=5V, TA=+25℃ 110
Input low voltage (GPIO) VIL1 -0.3 V VDD=5V, TA=+25℃ 111
Input low voltage (Schmitt-trigger inputs) VIL2 -0.2 V VDD=5V, TA=+25℃; Schmitt-trigger inputs: RST, tCK/tDIO, RX0, USCI, INT0~2, FLT, Timer inputs 111
High-sensitivity touch key operating current (3.3V) ITK2 0.7 1 mA VDD=3.3V, TA=+25℃ 111
Input low voltage (GPIO, 3.3V) VIL3 -0.3 V VDD=3.3V, TA=+25℃ 111
Input low voltage (Schmitt-trigger inputs, 3.3V) VIL4 -0.2 V VDD=3.3V, TA=+25℃; Schmitt-trigger inputs: RST, tCK/tDIO, RX0, USCI, INT0~2, FLT, Timer inputs 111
Power supply voltage 1 (ADC, Vref=2.048V) VAD1 2.7 5 5.5 V TA=25℃; Vref = 2.048V 112
Power supply voltage 2 (ADC, Vref=1.024V or VDD) VAD2 2 5 5.5 V TA=25℃; Vref = 1.024V or Vref = VDD 112
Power supply voltage 3 (ADC, Vref=2.4V) VAD3 2.7 5 5.5 V TA=25℃; Vref = 2.4V 112
Internal reference 2.048V VREF1 2.028 2.048 2.07 V TA=25℃; VDD=2.7~5.5V 112
Internal reference 1.024V VREF2 1.004 1.024 1.044 V TA=25℃; VDD=2.0~5.5V 112
Internal reference 2.4V VREF3 2.37 2.4 2.45 V TA=25℃; VDD=2.7~5.5V 112
ADC input resistance RAIN 1 MΩ TA=25℃; VIN=5V 112
ADC conversion current 1 IADC1 2 mA TA=25℃; ADC module on, VDD=5V 112
ADC differential nonlinearity (DNL) DNL -3 3 LSB TA=25℃; VDD=5V, VREF=5V 113
ADC integral nonlinearity (INL) INL -3 3 LSB TA=25℃; VDD=5V, VREF=5V 113
ADC offset error EZ -4 4 LSB TA=25℃ 113
ADC full-scale error EF -4 4 LSB TA=25℃ 113
ADC total absolute error EAD -4 4 LSB TA=25℃ 113
ADC conversion time 1 TADC1 1.1 1.4 μs TA=25℃; fSYS=32MHz, LOWSP[2:0]=100 113
ADC conversion time 2 TADC2 1.2 1.5 μs TA=25℃; fSYS=32MHz, LOWSP[2:0]=101 113
ADC conversion time 3 TADC3 1.5 1.9 μs TA=25℃; fSYS=32MHz, LOWSP[2:0]=110 113
ADC conversion time 4 TADC4 2 2.6 μs TA=25℃; fSYS=32MHz, LOWSP[2:0]=111 113
Power-down mode wake-up time TPDW 60 130 μs VDD=2.4V~5.5V, TA=25℃ 112
Reset pulse width (active low) TReset 18 μs VDD=2.4V~5.5V, TA=25℃; active low 112
RC oscillator frequency stability (fHRC) fHRC 31.68 32 32.32 MHz VDD=2.05.5V, TA=-40105℃ 112
Internal high-frequency oscillator accuracy (32/16/8/4MHz) -1 1 % 1
Low-frequency oscillator accuracy (32kHz) -4 4 % 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PBT BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 46

CAD (KiCad official)

  • Symbol: SC95F8673M28U
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOP-28 (KiCad packages3D, STEP)
  • 3D model files: sc95f8673m28u-etched.step / sc95f8673m28u-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc95f8673m28u.step / sc95f8673m28u.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (126 pp, sha256 763170423c479f15, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF