3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSC95F8673M28U
SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · SOP-28
SC95F8673M28U from SOC(Shenzhen SinOne Microelectronics), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; the device operates from 2.0V to 5.5V. |
| 2 | P1.0/CMOD | bidirectional | GPIO P1.0; CMOD is the touch key external capacitor connection. |
| 3 | VSS | power_in | Ground pin. |
| 4 | P5.0/OSCI | bidirectional | GPIO P5.0; OSCI is the external crystal oscillator input when the external crystal is enabled. |
| 5 | P5.1/OSCO | bidirectional | GPIO P5.1; OSCO is the external crystal oscillator output when the external crystal is enabled. |
| 6 | P1.1/INT01/TK22/RST | bidirectional | GPIO P1.1; INT01 is external interrupt 0 input 1, TK22 is touch channel 22, and RST is the reset pin when selected by Code Option. |
| 7 | P1.2/INT02/T0/RX0/TK21/tCK | bidirectional | GPIO P1.2; INT02 is external interrupt 0 input 2, T0 is counter 0 external input, RX0 is UART0 receive, and tCK is the programming/emulation clock line; avoid TK21 if TK debug is used. |
| 8 | P1.3/INT03/T1/TX0/TK20/tDIO | bidirectional | GPIO P1.3; INT03 is external interrupt 0 input 3, T1 is counter 1 external input, TX0 is UART0 transmit, and tDIO is the programming/emulation data line; avoid TK20 if TK debug is used. |
| 9 | P1.4/INT10/USRX2/AIN9/TK19 | bidirectional | GPIO P1.4; INT10 is external interrupt 1 input 0, USRX2 is USCI2 MISO/RX, AIN9 is ADC input channel 9, and TK19 is touch channel 19. |
| 10 | P1.5/INT11/USTX2/AIN8/TK18 | bidirectional | GPIO P1.5; INT11 is external interrupt 1 input 1, USTX2 is USCI2 MOSI/SDA/TX, AIN8 is ADC input channel 8, and TK18 is touch channel 18. |
| 11 | P1.6/INT12/AIN7/TK17 | bidirectional | GPIO P1.6; INT12 is external interrupt 1 input 2, AIN7 is ADC input channel 7, and TK17 is touch channel 17. |
| 12 | P1.7/IN13/AIN6/TK16 | bidirectional | GPIO P1.7; INT13 (printed as IN13) is external interrupt 1 input 3, AIN6 is ADC input channel 6, and TK16 is touch channel 16. |
| 13 | P2.7/PWM07/AIN5/TK15 | bidirectional | GPIO P2.7; PWM07 is a PWM output, AIN5 is ADC input channel 5, and TK15 is touch channel 15. |
| 14 | P2.6/USCK2/PWM06/AIN4/TK14 | bidirectional | GPIO P2.6; USCK2 is USCI2 SCK, PWM06 is a PWM output, AIN4 is ADC input channel 4, and TK14 is touch channel 14. |
| 15 | P2.5/T4/PWM40/PWM05/AIN3/TK13 | bidirectional | GPIO P2.5; T4 is counter 4 external input, PWM40 and PWM05 are PWM outputs, AIN3 is ADC input channel 3, and TK13 is touch channel 13. |
| 16 | P2.4/T4EX/PWM41/PWM04/AIN2/TK12 | bidirectional | GPIO P2.4; T4EX is the Timer4 external capture input, PWM41 and PWM04 are PWM outputs, AIN2 is ADC input channel 2, and TK12 is touch channel 12. |
| 17 | P2.3/AIN1/TK11 | bidirectional | GPIO P2.3; AIN1 is ADC input channel 1, and TK11 is touch channel 11. |
| 18 | P2.2/AIN0/TK10 | bidirectional | GPIO P2.2; AIN0 is ADC input channel 0, and TK10 is touch channel 10. |
| 19 | P2.1/INT25/AIN11/USRX0/TK9 | bidirectional | GPIO P2.1; INT25 is external interrupt 2 input 5, AIN11 is ADC input channel 11, USRX0 is USCI0 MISO/RX, and TK9 is touch channel 9. |
| 20 | P2.0/INT24/AIN10/USTX0/TK8 | bidirectional | GPIO P2.0; INT24 is external interrupt 2 input 4, AIN10 is ADC input channel 10, USTX0 is USCI0 MOSI/SDA/TX, and TK8 is touch channel 8. |
| 21 | P0.7/INT23/T2/PWM20/TK7 | bidirectional | GPIO P0.7; INT23 is external interrupt 2 input 3, T2 is counter 2 external input, PWM20 is a PWM output, and TK7 is touch channel 7. |
| 22 | P0.6/INT22/T2EX/PWM21/TK6 | bidirectional | GPIO P0.6; INT22 is external interrupt 2 input 2, T2EX is the Timer2 external capture input, PWM21 is a PWM output, and TK6 is touch channel 6. |
| 23 | P0.5/INT21/USCK0/TK5 | bidirectional | GPIO P0.5; INT21 is external interrupt 2 input 1, USCK0 is USCI0 SCK, and TK5 is touch channel 5. |
| 24 | P0.4/INT20/USCK1/FLT/TK4 | bidirectional | GPIO P0.4; INT20 is external interrupt 2 input 0, USCK1 is USCI1 SCK, FLT is the PWM fault detection input, and TK4 is touch channel 4. |
| 25 | P0.3/USTX1/PWM03/TK3 | bidirectional | GPIO P0.3; USTX1 is USCI1 MOSI/SDA/TX, PWM03 is a PWM output, and TK3 is touch channel 3. |
| 26 | P0.2/USRX1/PWM02/TK2 | bidirectional | GPIO P0.2; USRX1 is USCI1 MISO/RX, PWM02 is a PWM output, and TK2 is touch channel 2. |
| 27 | P0.1/T3/PWM30/PWM01/TK1 | bidirectional | GPIO P0.1; T3 is counter 3 external input, PWM30 and PWM01 are PWM outputs, and TK1 is touch channel 1. |
| 28 | P0.0/T3EX/PWM31/PWM00/TK0 | bidirectional | GPIO P0.0; T3EX is the Timer3 external capture input, PWM31 and PWM00 are PWM outputs, and TK0 is touch channel 0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-28 |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage (VDD/VSS) | VDD/VSS | -0.3 | 5.5 | V | 110 | ||
| Voltage on any pin (input/output) | -0.3 | V | 110 | ||||
| Operating ambient temperature (TA) | TA | -40 | 105 | ℃ | 110 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 110 | ||
| Current through VDD | IVDD | 200 | mA | 110 | |||
| Current through VSS | IVSS | 200 | mA | 110 | |||
| Operating supply voltage (VDD) | VDD | 2 | 5.5 | V | System clock frequency 32MHz | 110 | |
| Operating ambient temperature (TA) | TA | -40 | 105 | ℃ | 110 | ||
| Erase/write cycles (Flash) | NEND | 100000 | Cycles | 110 | |||
| Data retention time (Flash) | TDR | 100 | Years | TA = +25℃ | 110 | ||
| Full chip erase time | TErase | 30 | 40 | ms | TA = +25℃ | 110 | |
| Base Timer operating current | IBTM | 1.3 | 3 | μA | VDD=5V, TA=+25℃; BTMFS[3:0]=1000; one interrupt every 4.0 s | 110 | |
| WDT current | IWDT | 1.3 | 3 | μA | VDD=5V, TA=+25℃; WDTCKS[2:0]=000; WDT overflow 500ms | 110 | |
| High-sensitivity touch key operating current (5V) | ITK1 | 0.8 | 1.2 | mA | VDD=5V, TA=+25℃ | 110 | |
| Input low voltage (GPIO) | VIL1 | -0.3 | V | VDD=5V, TA=+25℃ | 111 | ||
| Input low voltage (Schmitt-trigger inputs) | VIL2 | -0.2 | V | VDD=5V, TA=+25℃; Schmitt-trigger inputs: RST, tCK/tDIO, RX0, USCI, INT0~2, FLT, Timer inputs | 111 | ||
| High-sensitivity touch key operating current (3.3V) | ITK2 | 0.7 | 1 | mA | VDD=3.3V, TA=+25℃ | 111 | |
| Input low voltage (GPIO, 3.3V) | VIL3 | -0.3 | V | VDD=3.3V, TA=+25℃ | 111 | ||
| Input low voltage (Schmitt-trigger inputs, 3.3V) | VIL4 | -0.2 | V | VDD=3.3V, TA=+25℃; Schmitt-trigger inputs: RST, tCK/tDIO, RX0, USCI, INT0~2, FLT, Timer inputs | 111 | ||
| Power supply voltage 1 (ADC, Vref=2.048V) | VAD1 | 2.7 | 5 | 5.5 | V | TA=25℃; Vref = 2.048V | 112 |
| Power supply voltage 2 (ADC, Vref=1.024V or VDD) | VAD2 | 2 | 5 | 5.5 | V | TA=25℃; Vref = 1.024V or Vref = VDD | 112 |
| Power supply voltage 3 (ADC, Vref=2.4V) | VAD3 | 2.7 | 5 | 5.5 | V | TA=25℃; Vref = 2.4V | 112 |
| Internal reference 2.048V | VREF1 | 2.028 | 2.048 | 2.07 | V | TA=25℃; VDD=2.7~5.5V | 112 |
| Internal reference 1.024V | VREF2 | 1.004 | 1.024 | 1.044 | V | TA=25℃; VDD=2.0~5.5V | 112 |
| Internal reference 2.4V | VREF3 | 2.37 | 2.4 | 2.45 | V | TA=25℃; VDD=2.7~5.5V | 112 |
| ADC input resistance | RAIN | 1 | MΩ | TA=25℃; VIN=5V | 112 | ||
| ADC conversion current 1 | IADC1 | 2 | mA | TA=25℃; ADC module on, VDD=5V | 112 | ||
| ADC differential nonlinearity (DNL) | DNL | -3 | 3 | LSB | TA=25℃; VDD=5V, VREF=5V | 113 | |
| ADC integral nonlinearity (INL) | INL | -3 | 3 | LSB | TA=25℃; VDD=5V, VREF=5V | 113 | |
| ADC offset error | EZ | -4 | 4 | LSB | TA=25℃ | 113 | |
| ADC full-scale error | EF | -4 | 4 | LSB | TA=25℃ | 113 | |
| ADC total absolute error | EAD | -4 | 4 | LSB | TA=25℃ | 113 | |
| ADC conversion time 1 | TADC1 | 1.1 | 1.4 | μs | TA=25℃; fSYS=32MHz, LOWSP[2:0]=100 | 113 | |
| ADC conversion time 2 | TADC2 | 1.2 | 1.5 | μs | TA=25℃; fSYS=32MHz, LOWSP[2:0]=101 | 113 | |
| ADC conversion time 3 | TADC3 | 1.5 | 1.9 | μs | TA=25℃; fSYS=32MHz, LOWSP[2:0]=110 | 113 | |
| ADC conversion time 4 | TADC4 | 2 | 2.6 | μs | TA=25℃; fSYS=32MHz, LOWSP[2:0]=111 | 113 | |
| Power-down mode wake-up time | TPDW | 60 | 130 | μs | VDD=2.4V~5.5V, TA=25℃ | 112 | |
| Reset pulse width (active low) | TReset | 18 | μs | VDD=2.4V~5.5V, TA=25℃; active low | 112 | ||
| RC oscillator frequency stability (fHRC) | fHRC | 31.68 | 32 | 32.32 | MHz | VDD=2.0 |
112 |
| Internal high-frequency oscillator accuracy (32/16/8/4MHz) | -1 | 1 | % | 1 | |||
| Low-frequency oscillator accuracy (32kHz) | -4 | 4 | % | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 46 |
CAD (KiCad official)
- Symbol:
SC95F8673M28U - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOP-28 (KiCad packages3D, STEP)
- 3D model files:
sc95f8673m28u-etched.step/sc95f8673m28u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc95f8673m28u.step/sc95f8673m28u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (126 pp, sha256
763170423c479f15, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).