main
Ray Publish 0.1.0 0ada49a

SC69401DC-TR-Q

Semiment · Magnetic Angle Sensors · SOP-8

SC69401DC-TR-Q from Semiment, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input; the 5 V mode operating range is 4.5 V to 5.5 V, with an absolute limit of -14 V to 28 V for under 60 s.
2 Test0 output Test pin to be connected to ground; in SPI mode it is the SPI_MISO data output (master in, slave out).
3 Test1 passive Test pin to be connected to ground.
4 Test2 input Test pin to be connected to ground; in SPI mode it is the SPI_SCLK clock input.
5 OUT bidirectional Analog output, PWM output, or SPI_CS enable input depending on the selected output mode; analog output swing is limited by the programmable clamp range and the output absolute limit of -6 V to 18 V for under 60 s.
6 Test3 input Test pin to be connected to ground; in SPI mode it is the SPI_MOSI data input (master out, slave in).
7 VREG power_out Internal regulated supply output, typically 3.37 V (3.1 V to 3.5 V); it is not specified as a supply for external loads.
8 VSS power_in Ground reference for the sensor.

Key specifications

Parameter Value
Manufacturer Semiment
Package SOP-8
Category Magnetic Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDD), absolute maximum VDD -14 28 V <60S 7
Analog output voltage (VOUT), absolute maximum VOUT -6 18 V <60S 7
Reverse output current IR 40 mA 7
Operating temperature TA -40 160 ℃ 7
Storage temperature TS -40 160 ℃ 7
Magnetic field strength, absolute maximum H -1 1 T 7
ESD, human body model (HBM) VESD -4 4 kV HBM per EIA/JESD22-A114-B 7
Operating voltage, 5V mode VDD 4.5 5 5.5 V 5V mode 8
Operating voltage, 3.3V mode VDD_3.3V 3.15 3.3 3.6 V VREG and VDD both at 3.3V, UVLO_3P5EN=1 8
Operating current, single-chip SOP-8 IDD 8 10 mA Single-chip SOP-8 8
Inrush (power-on surge) current, single-chip SOP-8 Isurge 50 mA Single-chip SOP-8 8
Overcurrent alarm current, single-chip SOP-8 IOCP 25 35 mA Single-chip SOP-8 8
Regulated voltage VREG 3.1 3.37 3.5 V 8
Regulated voltage overvoltage detection VREGOVP 3.65 3.75 3.85 V 8
Regulated voltage undervoltage detection VREGUVL 2.7 2.8 2.9 V 8
Undervoltage detection voltage VUVLO 3.4 3.7 4.2 V UVLO_3P5EN = 0 8
Undervoltage detection voltage VUVLO 2.6 2.8 3.1 V UVLO_3P5EN = 1 8
Undervoltage detection hysteresis VUVLOHYS 50 350 mV 8
Overvoltage protection voltage VOVP 5.8 6.2 6.6 V 8
Overvoltage detection hysteresis VOVPHYST 100 600 mV 8
Output short-circuit current Ishort 15 mA Short to GND, analog output 8
Output short-circuit current Ishort 50 mA Short to GND, PWM push-pull output 8
Analog output load resistance RL 4.7 470 KΩ Pull-up resistor connected to supply 8
PWM output load resistance RL_PWM 1 KΩ Pull-up resistor connected to supply 8
Analog output saturation low level Vsat_lo 0.5 2 %VDD Pull-up R=10k to supply 8
Analog output saturation low level Vsat_lo 2.5 3 %VDD Pull-up R=4.7k to supply 8
Analog output saturation high level Vsat_hi 96.5 97.5 %VDD Pull-down R=4.7k to GND 8
Analog output saturation high level Vsat_hi 97.5 98 %VDD Pull-down R=10k to GND 8
Active diagnostic output low level Dsat_lo 1 2 %VDD Pull-down R≤470k 8
Active diagnostic output low level Dsat_lo 0.5 1 %VDD Pull-down R≤10k 9
Active diagnostic output high level Dsat_hi 97.5 98 %VDD Pull-up R≤10k 9
Passive diagnostic output level, VSS open BVSSPD 0 3 %VDD VSS open, pull-down, 4.7K≤R≤100k 9
Passive diagnostic output level, VSS open BVSSPU 97 98 %VDD VSS open, pull-up, 4.7K≤R≤100k 9
Passive diagnostic output level, VDD open BVDDPD 0 1 %VDD VDD open, pull-down, 4.7K≤R≤100k 9
Passive diagnostic output level, VDD open BVDDPU 96.5 98 %VDD VDD open, pull-up, 4.7K≤R≤100k 9
Programmable clamp voltage, low Clamp_lo 0 100 %VDD Programmable 9
Programmable clamp voltage, high Clamp_hi 0 100 %VDD Programmable 9
Main clock frequency FCK 7.8 8.2 8.5 MHz Full temperature range 10
Main clock frequency temperature drift ΔFCK,T -3 3 %FCK 10
Data refresh period Tper 121 128 134 us 10
Angle offset error ΔEang -1.2 1.2 Deg 14
Nonlinearity error ΔEL -1 1 Deg 14
Angle temperature drift error ΔEtemp -0.5 0.5 Deg 14
Ratiometric output error ΔEratio -0.05 0 0.5 %VDD 4.5V≤VDD≤5.5V 14
DAC integral nonlinearity error INL 5 LSB 14
DAC differential nonlinearity error DNL 0.05 1 3 LSB 14
Magnetic field strength range HEXT 10 120 mT 15
Magnet-to-chip air gap AG 0.5 3 mm 15

CAD (KiCad official)

  • Symbol: SC69401DC-TR-Q
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sc69401dc-tr-q-etched.step / sc69401dc-tr-q-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc69401dc-tr-q.step / sc69401dc-tr-q.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Semiment datasheet (37 pp, sha256 7a235a97fdece8cc, retrieved 2026-11-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF