3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSC69401DC-TR-Q
Semiment · Magnetic Angle Sensors · SOP-8
SC69401DC-TR-Q from Semiment, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the 5 V mode operating range is 4.5 V to 5.5 V, with an absolute limit of -14 V to 28 V for under 60 s. |
| 2 | Test0 | output | Test pin to be connected to ground; in SPI mode it is the SPI_MISO data output (master in, slave out). |
| 3 | Test1 | passive | Test pin to be connected to ground. |
| 4 | Test2 | input | Test pin to be connected to ground; in SPI mode it is the SPI_SCLK clock input. |
| 5 | OUT | bidirectional | Analog output, PWM output, or SPI_CS enable input depending on the selected output mode; analog output swing is limited by the programmable clamp range and the output absolute limit of -6 V to 18 V for under 60 s. |
| 6 | Test3 | input | Test pin to be connected to ground; in SPI mode it is the SPI_MOSI data input (master out, slave in). |
| 7 | VREG | power_out | Internal regulated supply output, typically 3.37 V (3.1 V to 3.5 V); it is not specified as a supply for external loads. |
| 8 | VSS | power_in | Ground reference for the sensor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Semiment |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD), absolute maximum | VDD | -14 | 28 | V | <60S | 7 | |
| Analog output voltage (VOUT), absolute maximum | VOUT | -6 | 18 | V | <60S | 7 | |
| Reverse output current | IR | 40 | mA | 7 | |||
| Operating temperature | TA | -40 | 160 | ℃ | 7 | ||
| Storage temperature | TS | -40 | 160 | ℃ | 7 | ||
| Magnetic field strength, absolute maximum | H | -1 | 1 | T | 7 | ||
| ESD, human body model (HBM) | VESD | -4 | 4 | kV | HBM per EIA/JESD22-A114-B | 7 | |
| Operating voltage, 5V mode | VDD | 4.5 | 5 | 5.5 | V | 5V mode | 8 |
| Operating voltage, 3.3V mode | VDD_3.3V | 3.15 | 3.3 | 3.6 | V | VREG and VDD both at 3.3V, UVLO_3P5EN=1 | 8 |
| Operating current, single-chip SOP-8 | IDD | 8 | 10 | mA | Single-chip SOP-8 | 8 | |
| Inrush (power-on surge) current, single-chip SOP-8 | Isurge | 50 | mA | Single-chip SOP-8 | 8 | ||
| Overcurrent alarm current, single-chip SOP-8 | IOCP | 25 | 35 | mA | Single-chip SOP-8 | 8 | |
| Regulated voltage | VREG | 3.1 | 3.37 | 3.5 | V | 8 | |
| Regulated voltage overvoltage detection | VREGOVP | 3.65 | 3.75 | 3.85 | V | 8 | |
| Regulated voltage undervoltage detection | VREGUVL | 2.7 | 2.8 | 2.9 | V | 8 | |
| Undervoltage detection voltage | VUVLO | 3.4 | 3.7 | 4.2 | V | UVLO_3P5EN = 0 | 8 |
| Undervoltage detection voltage | VUVLO | 2.6 | 2.8 | 3.1 | V | UVLO_3P5EN = 1 | 8 |
| Undervoltage detection hysteresis | VUVLOHYS | 50 | 350 | mV | 8 | ||
| Overvoltage protection voltage | VOVP | 5.8 | 6.2 | 6.6 | V | 8 | |
| Overvoltage detection hysteresis | VOVPHYST | 100 | 600 | mV | 8 | ||
| Output short-circuit current | Ishort | 15 | mA | Short to GND, analog output | 8 | ||
| Output short-circuit current | Ishort | 50 | mA | Short to GND, PWM push-pull output | 8 | ||
| Analog output load resistance | RL | 4.7 | 470 | KΩ | Pull-up resistor connected to supply | 8 | |
| PWM output load resistance | RL_PWM | 1 | KΩ | Pull-up resistor connected to supply | 8 | ||
| Analog output saturation low level | Vsat_lo | 0.5 | 2 | %VDD | Pull-up R=10k to supply | 8 | |
| Analog output saturation low level | Vsat_lo | 2.5 | 3 | %VDD | Pull-up R=4.7k to supply | 8 | |
| Analog output saturation high level | Vsat_hi | 96.5 | 97.5 | %VDD | Pull-down R=4.7k to GND | 8 | |
| Analog output saturation high level | Vsat_hi | 97.5 | 98 | %VDD | Pull-down R=10k to GND | 8 | |
| Active diagnostic output low level | Dsat_lo | 1 | 2 | %VDD | Pull-down R≤470k | 8 | |
| Active diagnostic output low level | Dsat_lo | 0.5 | 1 | %VDD | Pull-down R≤10k | 9 | |
| Active diagnostic output high level | Dsat_hi | 97.5 | 98 | %VDD | Pull-up R≤10k | 9 | |
| Passive diagnostic output level, VSS open | BVSSPD | 0 | 3 | %VDD | VSS open, pull-down, 4.7K≤R≤100k | 9 | |
| Passive diagnostic output level, VSS open | BVSSPU | 97 | 98 | %VDD | VSS open, pull-up, 4.7K≤R≤100k | 9 | |
| Passive diagnostic output level, VDD open | BVDDPD | 0 | 1 | %VDD | VDD open, pull-down, 4.7K≤R≤100k | 9 | |
| Passive diagnostic output level, VDD open | BVDDPU | 96.5 | 98 | %VDD | VDD open, pull-up, 4.7K≤R≤100k | 9 | |
| Programmable clamp voltage, low | Clamp_lo | 0 | 100 | %VDD | Programmable | 9 | |
| Programmable clamp voltage, high | Clamp_hi | 0 | 100 | %VDD | Programmable | 9 | |
| Main clock frequency | FCK | 7.8 | 8.2 | 8.5 | MHz | Full temperature range | 10 |
| Main clock frequency temperature drift | ΔFCK,T | -3 | 3 | %FCK | 10 | ||
| Data refresh period | Tper | 121 | 128 | 134 | us | 10 | |
| Angle offset error | ΔEang | -1.2 | 1.2 | Deg | 14 | ||
| Nonlinearity error | ΔEL | -1 | 1 | Deg | 14 | ||
| Angle temperature drift error | ΔEtemp | -0.5 | 0.5 | Deg | 14 | ||
| Ratiometric output error | ΔEratio | -0.05 | 0 | 0.5 | %VDD | 4.5V≤VDD≤5.5V | 14 |
| DAC integral nonlinearity error | INL | 5 | LSB | 14 | |||
| DAC differential nonlinearity error | DNL | 0.05 | 1 | 3 | LSB | 14 | |
| Magnetic field strength range | HEXT | 10 | 120 | mT | 15 | ||
| Magnet-to-chip air gap | AG | 0.5 | 3 | mm | 15 |
CAD (KiCad official)
- Symbol:
SC69401DC-TR-Q - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sc69401dc-tr-q-etched.step/sc69401dc-tr-q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc69401dc-tr-q.step/sc69401dc-tr-q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Semiment datasheet (37 pp, sha256
7a235a97fdece8cc, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).