component
SC18IS606PWJ
Public Made by Adomby adom
NXP Semicon Interface - Specialized, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291
{
"slug": "sc18is606pwj",
"version": "0.1.0",
"type": "component",
"description": "NXP Semicon Interface - Specialized, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"sc18is606pwj",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sc18is606pwj.kicad_sym",
"sc18is606pwj.kicad_mod",
"sc18is606pwj.glb",
"sc18is606pwj.step",
"sc18is606pwj.lbr",
"docs/hero.png",
"docs/sc18is606pwj-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sc18is606pwj-hero.glb",
"sc18is606pwj-hero.overlay.json",
"sc18is606pwj-etched.glb"
],
"component": {
"mpn": "SC18IS606PWJ",
"manufacturer": "NXP Semicon",
"package": "TSSOP-16",
"pin_count": 16,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "Interface - Specialized",
"datasheet": "https://www.nxp.com/docs/en/data-sheet/SC18IS606PWJ.pdf",
"parts": {
"symbol": "sc18is606pwj.kicad_sym",
"footprint": "sc18is606pwj.kicad_mod",
"model_3d": "sc18is606pwj-hero.glb",
"model_3d_plain": "sc18is606pwj-etched.glb",
"model_3d_step": "sc18is606pwj-etched.step",
"model_3d_step_plain": "sc18is606pwj.step",
"lbr": "sc18is606pwj.lbr"
},
"distributor_links": {
"lcsc": "C5190384",
"digikey": "568-SC18IS606PWJTR-ND",
"mouser": "771-SC18IS606PWJ"
},
"distributor_check": {
"checked_at": "2026-10-30T17:40:16Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "568-SC18IS606PWJTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "771-SC18IS606PWJ",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SDA",
"type": "bidirectional",
"description": "I2C-bus data line, operating at up to 400 kHz as a target."
},
{
"number": "2",
"name": "SCL",
"type": "input",
"description": "I2C-bus clock input, supporting clock rates up to 400 kHz."
},
{
"number": "3",
"name": "INT",
"type": "output",
"description": "Active LOW interrupt output; this open-drain pin must be pulled HIGH with a resistor and must not be held LOW at power on or reset."
},
{
"number": "4",
"name": "RESET",
"type": "input",
"description": "Reset input, active LOW."
},
{
"number": "5",
"name": "A2",
"type": "input",
"description": "Address input 2, which sets the programmable bit A2 of the I2C-bus target address."
},
{
"number": "6",
"name": "A1",
"type": "input",
"description": "Address input 1, which sets the programmable bit A1 of the I2C-bus target address."
},
{
"number": "7",
"name": "A0",
"type": "input",
"description": "Address input 0, which sets the programmable bit A0 of the I2C-bus target address."
},
{
"number": "8",
"name": "SS2/GPIO2",
"type": "bidirectional",
"description": "SPI slave select output 2 (active LOW), or GPIO 2 when not used as an SPI chip select."
},
{
"number": "9",
"name": "SS0/GPIO0",
"type": "bidirectional",
"description": "SPI slave select output 0 (active LOW), or GPIO 0 when not used as an SPI chip select."
},
{
"number": "10",
"name": "MOSI",
"type": "output",
"description": "Master Out, Slave In: SPI data output from the SC18IS606 master to the slave device."
},
{
"number": "11",
"name": "SPICLK",
"type": "output",
"description": "SPI clock output generated by the SC18IS606 to clock data on MOSI and MISO, operating up to 1.8 Mbit/s."
},
{
"number": "12",
"name": "VDD",
"type": "power_in",
"description": "Supply voltage, 1.71 V to 3.6 V."
},
{
"number": "13",
"name": "VSS",
"type": "power_in",
"description": "Ground supply."
},
{
"number": "14",
"name": "MISO",
"type": "input",
"description": "Master In, Slave Out: SPI data input to the SC18IS606 master from the slave device."
},
{
"number": "15",
"name": "VREFP",
"type": "power_in",
"description": "Must be connected to VDD."
},
{
"number": "16",
"name": "SS1/GPIO1",
"type": "bidirectional",
"description": "SPI slave select output 1 (active LOW), or GPIO 1 when not used as an SPI chip select."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives the VREFP pin type as '-' (no type); power_in was chosen because the datasheet r; INT is documented as an open-drain output; mapped to KiCad 'output' per the datasheet's 'O' type. Co; Pinning was read from the Figure 2 layout (left column pins 1-8 top to bottom, right column pins 9-1"
],
"pages_sent": 11,
"cost_usd": 0.0555,
"at": "2026-10-30T17:39:50"
},
"datasheet": {
"url": "https://www.nxp.com/docs/en/data-sheet/SC18IS606PWJ.pdf",
"pages": 27,
"sha256": "f597e58a481bf76a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sc18is606pwj.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sc18is606pwj-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9b9a2e96862f352c7c635310f86940fb91046390e418b8f4353dbb09570a9601",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOT403-1 (TSSOP16)",
"source_page": 16,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 4.4,
"range_mm": [
4.3,
4.5
]
},
"E": {
"nom_mm": 6.4,
"range_mm": [
6.2,
6.6
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "sc18is606pwj.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}