main
Ray Set visibility: public 3d85509
{
  "schema_version": 1,
  "type": "component",
  "slug": "sc1632",
  "title": "SC1632",
  "brief": "Raspberry Pi Development Boards, Kits, Programmers, Raspberry Pi Pico 2 module, 2x20 0.1in through-hole headers (51x21 mm). Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "development boards, kits, programmers",
    "sc1632",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SC1632",
    "land_source": "derived",
    "land_note": "No through-hole carrier land is printed (Figure 5 is the SMT castellation land for the bare SC1631). Derived from Figure 3 (PDF p.8): 2 rows of 20 pins on 2.54 mm pitch, rows 17.78 mm apart, pin 1 to pin 20 span 48.26 mm, board 21 x 51 mm with 1.61 mm side margin; pin numbering per Figure 4 (pin 1 top-left, 20 bottom-left, 21 bottom-right, 40 top-right, USB at top). Pins are standard 0.1in pin headers (p.4 text): drill 1.0 mm, pad 1.7 mm (pin 1 square), the KiCad PinHeader_2.54mm land for those leads. Body 21 x 51 mm centred on the pin grid (48.26 + 2x1.37 = 51, as drawn in Figure 3); h = 1.0 mm board thickness (p.7 text), headers and parts above not dimensioned. The pre-fitted debug header (D1-D3) has no carrier pads.",
    "manufacturer": "Raspberry Pi",
    "package": "Raspberry Pi Pico 2 module, 2x20 0.1in through-hole headers (51x21 mm)",
    "pin_count": 40,
    "category": "Development Boards, Kits, Programmers",
    "subcategory": "Development Boards, Kits, Programmers",
    "datasheet": "https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf",
    "parts": {
      "symbol": "sc1632.kicad_sym",
      "footprint": "sc1632.kicad_mod",
      "model_3d": "sc1632-hero.glb",
      "model_3d_plain": "sc1632.glb",
      "model_3d_step": "sc1632-etched.step",
      "model_3d_step_plain": "sc1632.step",
      "lbr": "sc1632.lbr"
    },
    "distributor_links": {
      "digikey": "2648-SC1632-ND",
      "mouser": "358-SC1632"
    },
    "distributor_check": {
      "checked_at": "2026-11-19T02:12:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2648-SC1632-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "358-SC1632",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GP0",
        "type": "bidirectional",
        "description": "GPIO0: UART0 TX, I2C0 SDA, SPI0 RX"
      },
      {
        "number": "2",
        "name": "GP1",
        "type": "bidirectional",
        "description": "GPIO1: UART0 RX, I2C0 SCL, SPI0 CSn"
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "4",
        "name": "GP2",
        "type": "bidirectional",
        "description": "GPIO2: I2C1 SDA, SPI0 SCK"
      },
      {
        "number": "5",
        "name": "GP3",
        "type": "bidirectional",
        "description": "GPIO3: I2C1 SCL, SPI0 TX"
      },
      {
        "number": "6",
        "name": "GP4",
        "type": "bidirectional",
        "description": "GPIO4: UART1 TX, I2C0 SDA, SPI0 RX"
      },
      {
        "number": "7",
        "name": "GP5",
        "type": "bidirectional",
        "description": "GPIO5: UART1 RX, I2C0 SCL, SPI0 CSn"
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "9",
        "name": "GP6",
        "type": "bidirectional",
        "description": "GPIO6: I2C1 SDA, SPI0 SCK"
      },
      {
        "number": "10",
        "name": "GP7",
        "type": "bidirectional",
        "description": "GPIO7: I2C1 SCL, SPI0 TX"
      },
      {
        "number": "11",
        "name": "GP8",
        "type": "bidirectional",
        "description": "GPIO8: UART1 TX, I2C0 SDA, SPI1 RX"
      },
      {
        "number": "12",
        "name": "GP9",
        "type": "bidirectional",
        "description": "GPIO9: UART1 RX, I2C0 SCL, SPI1 CSn"
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "14",
        "name": "GP10",
        "type": "bidirectional",
        "description": "GPIO10: I2C1 SDA, SPI1 SCK"
      },
      {
        "number": "15",
        "name": "GP11",
        "type": "bidirectional",
        "description": "GPIO11: I2C1 SCL, SPI1 TX"
      },
      {
        "number": "16",
        "name": "GP12",
        "type": "bidirectional",
        "description": "GPIO12: UART0 TX, I2C0 SDA, SPI1 RX"
      },
      {
        "number": "17",
        "name": "GP13",
        "type": "bidirectional",
        "description": "GPIO13: UART0 RX, I2C0 SCL, SPI1 CSn"
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "19",
        "name": "GP14",
        "type": "bidirectional",
        "description": "GPIO14: I2C1 SDA, SPI1 SCK"
      },
      {
        "number": "20",
        "name": "GP15",
        "type": "bidirectional",
        "description": "GPIO15: I2C1 SCL, SPI1 TX"
      },
      {
        "number": "21",
        "name": "GP16",
        "type": "bidirectional",
        "description": "GPIO16: SPI0 RX, I2C0 SDA, UART0 TX"
      },
      {
        "number": "22",
        "name": "GP17",
        "type": "bidirectional",
        "description": "GPIO17: SPI0 CSn, I2C0 SCL, UART0 RX"
      },
      {
        "number": "23",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "24",
        "name": "GP18",
        "type": "bidirectional",
        "description": "GPIO18: SPI0 SCK, I2C1 SDA"
      },
      {
        "number": "25",
        "name": "GP19",
        "type": "bidirectional",
        "description": "GPIO19: SPI0 TX, I2C1 SCL"
      },
      {
        "number": "26",
        "name": "GP20",
        "type": "bidirectional",
        "description": "GPIO20: I2C0 SDA"
      },
      {
        "number": "27",
        "name": "GP21",
        "type": "bidirectional",
        "description": "GPIO21: I2C0 SCL"
      },
      {
        "number": "28",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "29",
        "name": "GP22",
        "type": "bidirectional",
        "description": "GPIO22: GPIO"
      },
      {
        "number": "30",
        "name": "RUN",
        "type": "input",
        "description": "RP2350 enable; on-chip ~50 kOhm pull-up to 3.3 V; short low to reset"
      },
      {
        "number": "31",
        "name": "GP26",
        "type": "bidirectional",
        "description": "GPIO26: ADC0, I2C1 SDA"
      },
      {
        "number": "32",
        "name": "GP27",
        "type": "bidirectional",
        "description": "GPIO27: ADC1, I2C1 SCL"
      },
      {
        "number": "33",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference for GPIO26-29 (Figure 2 pin cell reads GND, function cell and p.8 pin list read AGND)"
      },
      {
        "number": "34",
        "name": "GP28",
        "type": "bidirectional",
        "description": "GPIO28: ADC2"
      },
      {
        "number": "35",
        "name": "ADC_VREF",
        "type": "power_in",
        "description": "ADC power supply and reference voltage, filtered 3.3 V; may take an external reference"
      },
      {
        "number": "36",
        "name": "3V3(OUT)",
        "type": "power_out",
        "description": "Main 3.3 V supply from on-board SMPS; keep external load under 300 mA (p.8 text names it 3V3)"
      },
      {
        "number": "37",
        "name": "3V3_EN",
        "type": "input",
        "description": "On-board SMPS enable, pulled up to VSYS via 100 kOhm; short low to disable 3.3 V"
      },
      {
        "number": "38",
        "name": "GND",
        "type": "power_in",
        "description": "Ground"
      },
      {
        "number": "39",
        "name": "VSYS",
        "type": "power_in",
        "description": "Main system input, 1.8 V to 5.5 V, feeds the on-board SMPS"
      },
      {
        "number": "40",
        "name": "VBUS",
        "type": "power_in",
        "description": "Micro-USB input voltage (USB connector pin 1), nominally 5 V"
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf",
        "pages": 24,
        "sha256": "cbcfaf881018c686",
        "source_tier": "mfr",
        "citation": "Raspberry Pi datasheet"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 40,
        "described": 40,
        "cites_pages": true,
        "refuses_to_fabricate": true
      },
      "datasheet_names": "datasheet names confirmed by reviewer part-reviewer headless (ray review) against figure, p.5 (Figure 2. The pinout of the Raspberry Pi Pico 2 board)"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sc1632.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          21,
          51,
          4
        ],
        "zmin_mm": -3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f0dc5a275baddf00dc8c94cc255f8db50d9bb4e4bb1950f1b0c39a5addf93382",
        "checked": "2026-11-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sc1632-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          21,
          51,
          4
        ],
        "zmin_mm": -3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b376ece56fb7dd491d8547de02f5d48d064811815a15b640325d0d406dcb56ea",
        "checked": "2026-11-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Raspberry Pi",
      "Package": "Raspberry Pi Pico 2 module, 2x20 0.1in through-hole headers (51x21 mm)",
      "Category": "Development Boards, Kits, Programmers",
      "Pins": "40"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "cbcfaf881018c686495a2e53c7bd281e7e0a8217d79447d73eda7c8f74b7f675",
      "rows": [
        {
          "name": "Operating Temp Max",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 85,
          "conditions": "including self-heating",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Operating Temp Min",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -20,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "VSYS Min",
          "symbol": "VSYS",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "VSYS Max",
          "symbol": "VSYS",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "VBUS",
          "symbol": "VBUS",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": 5,
          "max": null,
          "conditions": "5 V ± 10% as printed",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "3V3 output load",
          "symbol": "3V3",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "recommended to keep load on this pin less than 300 mA; maximum depends on RP2350 load and VSYS voltage",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Recommended maximum ambient temperature of operation",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 70,
          "conditions": "recommended maximum ambient temperature of operation",
          "source_page": 13,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sc1632"
  ],
  "discovery_pitch": "SC1632 (Raspberry Pi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sc1632.kicad_sym",
    "sc1632.kicad_mod",
    "sc1632.glb",
    "sc1632.step",
    "sc1632.lbr",
    "docs/hero.png",
    "docs/sc1632-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sc1632-hero.glb",
    "sc1632-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}