main
Ray
Publish 0.1.0
8b784fe
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372
{
"slug": "sc1632",
"version": "0.1.0",
"type": "component",
"description": "Raspberry Pi Development Boards, Kits, Programmers, Raspberry Pi Pico 2 module, 2x20 0.1in through-hole headers (51x21 mm). Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"development boards, kits, programmers",
"sc1632",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sc1632.kicad_sym",
"sc1632.kicad_mod",
"sc1632.glb",
"sc1632.step",
"sc1632.lbr",
"docs/hero.png",
"docs/sc1632-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sc1632-hero.glb",
"sc1632-hero.overlay.json"
],
"component": {
"mpn": "SC1632",
"land_source": "derived",
"land_note": "No through-hole carrier land is printed (Figure 5 is the SMT castellation land for the bare SC1631). Derived from Figure 3 (PDF p.8): 2 rows of 20 pins on 2.54 mm pitch, rows 17.78 mm apart, pin 1 to pin 20 span 48.26 mm, board 21 x 51 mm with 1.61 mm side margin; pin numbering per Figure 4 (pin 1 top-left, 20 bottom-left, 21 bottom-right, 40 top-right, USB at top). Pins are standard 0.1in pin headers (p.4 text): drill 1.0 mm, pad 1.7 mm (pin 1 square), the KiCad PinHeader_2.54mm land for those leads. Body 21 x 51 mm centred on the pin grid (48.26 + 2x1.37 = 51, as drawn in Figure 3); h = 1.0 mm board thickness (p.7 text), headers and parts above not dimensioned. The pre-fitted debug header (D1-D3) has no carrier pads.",
"manufacturer": "Raspberry Pi",
"package": "Raspberry Pi Pico 2 module, 2x20 0.1in through-hole headers (51x21 mm)",
"pin_count": 40,
"category": "Development Boards, Kits, Programmers",
"subcategory": "Development Boards, Kits, Programmers",
"datasheet": "https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf",
"parts": {
"symbol": "sc1632.kicad_sym",
"footprint": "sc1632.kicad_mod",
"model_3d": "sc1632-hero.glb",
"model_3d_plain": "sc1632.glb",
"model_3d_step": "sc1632-etched.step",
"model_3d_step_plain": "sc1632.step",
"lbr": "sc1632.lbr"
},
"distributor_links": {
"digikey": "2648-SC1632-ND",
"mouser": "358-SC1632"
},
"distributor_check": {
"checked_at": "2026-11-19T02:12:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "2648-SC1632-ND",
"status": "found"
},
"mouser": {
"pn": "358-SC1632",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GP0",
"type": "bidirectional",
"description": "GPIO0: UART0 TX, I2C0 SDA, SPI0 RX"
},
{
"number": "2",
"name": "GP1",
"type": "bidirectional",
"description": "GPIO1: UART0 RX, I2C0 SCL, SPI0 CSn"
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "4",
"name": "GP2",
"type": "bidirectional",
"description": "GPIO2: I2C1 SDA, SPI0 SCK"
},
{
"number": "5",
"name": "GP3",
"type": "bidirectional",
"description": "GPIO3: I2C1 SCL, SPI0 TX"
},
{
"number": "6",
"name": "GP4",
"type": "bidirectional",
"description": "GPIO4: UART1 TX, I2C0 SDA, SPI0 RX"
},
{
"number": "7",
"name": "GP5",
"type": "bidirectional",
"description": "GPIO5: UART1 RX, I2C0 SCL, SPI0 CSn"
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "9",
"name": "GP6",
"type": "bidirectional",
"description": "GPIO6: I2C1 SDA, SPI0 SCK"
},
{
"number": "10",
"name": "GP7",
"type": "bidirectional",
"description": "GPIO7: I2C1 SCL, SPI0 TX"
},
{
"number": "11",
"name": "GP8",
"type": "bidirectional",
"description": "GPIO8: UART1 TX, I2C0 SDA, SPI1 RX"
},
{
"number": "12",
"name": "GP9",
"type": "bidirectional",
"description": "GPIO9: UART1 RX, I2C0 SCL, SPI1 CSn"
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "14",
"name": "GP10",
"type": "bidirectional",
"description": "GPIO10: I2C1 SDA, SPI1 SCK"
},
{
"number": "15",
"name": "GP11",
"type": "bidirectional",
"description": "GPIO11: I2C1 SCL, SPI1 TX"
},
{
"number": "16",
"name": "GP12",
"type": "bidirectional",
"description": "GPIO12: UART0 TX, I2C0 SDA, SPI1 RX"
},
{
"number": "17",
"name": "GP13",
"type": "bidirectional",
"description": "GPIO13: UART0 RX, I2C0 SCL, SPI1 CSn"
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "19",
"name": "GP14",
"type": "bidirectional",
"description": "GPIO14: I2C1 SDA, SPI1 SCK"
},
{
"number": "20",
"name": "GP15",
"type": "bidirectional",
"description": "GPIO15: I2C1 SCL, SPI1 TX"
},
{
"number": "21",
"name": "GP16",
"type": "bidirectional",
"description": "GPIO16: SPI0 RX, I2C0 SDA, UART0 TX"
},
{
"number": "22",
"name": "GP17",
"type": "bidirectional",
"description": "GPIO17: SPI0 CSn, I2C0 SCL, UART0 RX"
},
{
"number": "23",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "24",
"name": "GP18",
"type": "bidirectional",
"description": "GPIO18: SPI0 SCK, I2C1 SDA"
},
{
"number": "25",
"name": "GP19",
"type": "bidirectional",
"description": "GPIO19: SPI0 TX, I2C1 SCL"
},
{
"number": "26",
"name": "GP20",
"type": "bidirectional",
"description": "GPIO20: I2C0 SDA"
},
{
"number": "27",
"name": "GP21",
"type": "bidirectional",
"description": "GPIO21: I2C0 SCL"
},
{
"number": "28",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "29",
"name": "GP22",
"type": "bidirectional",
"description": "GPIO22: GPIO"
},
{
"number": "30",
"name": "RUN",
"type": "input",
"description": "RP2350 enable; on-chip ~50 kOhm pull-up to 3.3 V; short low to reset"
},
{
"number": "31",
"name": "GP26",
"type": "bidirectional",
"description": "GPIO26: ADC0, I2C1 SDA"
},
{
"number": "32",
"name": "GP27",
"type": "bidirectional",
"description": "GPIO27: ADC1, I2C1 SCL"
},
{
"number": "33",
"name": "AGND",
"type": "power_in",
"description": "Analog ground reference for GPIO26-29 (Figure 2 pin cell reads GND, function cell and p.8 pin list read AGND)"
},
{
"number": "34",
"name": "GP28",
"type": "bidirectional",
"description": "GPIO28: ADC2"
},
{
"number": "35",
"name": "ADC_VREF",
"type": "power_in",
"description": "ADC power supply and reference voltage, filtered 3.3 V; may take an external reference"
},
{
"number": "36",
"name": "3V3(OUT)",
"type": "power_out",
"description": "Main 3.3 V supply from on-board SMPS; keep external load under 300 mA (p.8 text names it 3V3)"
},
{
"number": "37",
"name": "3V3_EN",
"type": "input",
"description": "On-board SMPS enable, pulled up to VSYS via 100 kOhm; short low to disable 3.3 V"
},
{
"number": "38",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "39",
"name": "VSYS",
"type": "power_in",
"description": "Main system input, 1.8 V to 5.5 V, feeds the on-board SMPS"
},
{
"number": "40",
"name": "VBUS",
"type": "power_in",
"description": "Micro-USB input voltage (USB connector pin 1), nominally 5 V"
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheets.raspberrypi.com/pico/pico-2-datasheet.pdf",
"pages": 24,
"sha256": "cbcfaf881018c686",
"source_tier": "mfr",
"citation": "Raspberry Pi datasheet"
},
"cad": "Adom_Gen derived land; symbol and 3D generated",
"pins": {
"total": 40,
"described": 40,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sc1632.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
21.0,
51.0,
4.0
],
"zmin_mm": -3.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f0dc5a275baddf00dc8c94cc255f8db50d9bb4e4bb1950f1b0c39a5addf93382",
"checked": "2026-11-19",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sc1632-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
21.0,
51.0,
4.0
],
"zmin_mm": -3.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b376ece56fb7dd491d8547de02f5d48d064811815a15b640325d0d406dcb56ea",
"checked": "2026-11-19",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}