main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sc09b: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sc09b-etched.glb Publish 0.1.0 · Ray
sc09b-etched.step sc09b: factory component page (tier=lcsc) · Ray
sc09b-hero.glb sc09b: hero GLB from the etched model (keeps the MPN mark) · Ray
sc09b-hero.overlay.json Publish 0.1.0 · Ray
sc09b.glb Publish 0.1.0 · Ray
sc09b.kicad_mod Publish 0.1.0 · Ray
sc09b.kicad_sym Publish 0.1.0 · Ray
sc09b.lbr Publish 0.1.0 · Ray
sc09b.step Publish 0.1.0 · Ray

SC09B

icman(晶尊微) · Touch Sensors · SOP-16

SC09B from icman(晶尊微), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply ground input for the device, per the VDD/GND pin description.
2 CMOD bidirectional Charge-collection capacitor connection; a fixed-value capacitor between 1 nF and 10 nF (4.7 nF recommended) is used, independent of sensitivity.
3 CDC bidirectional Sensitivity capacitor connection with a range of 5 pF to 100 pF, where a smaller value gives higher sensitivity and 10% or better tolerance film, NPO or COG capacitors are recommended.
4 CIN0 bidirectional Touch sense input for key 0 (capacitive sense pad); leave floating when unused.
5 CIN1 bidirectional Touch sense input for key 1 (capacitive sense pad); leave floating when unused.
6 CIN2 bidirectional Touch sense input for key 2 (capacitive sense pad); leave floating when unused.
7 CIN3 bidirectional Touch sense input for key 3 (capacitive sense pad); leave floating when unused.
8 CIN4 bidirectional Touch sense input for key 4 (capacitive sense pad); leave floating when unused.
9 CIN5 bidirectional Touch sense input for key 5 (capacitive sense pad); leave floating when unused.
10 CIN6 bidirectional Touch sense input for key 6 (capacitive sense pad); leave floating when unused.
11 CIN7 bidirectional Touch sense input for key 7 (capacitive sense pad); leave floating when unused.
12 CIN8 bidirectional Touch sense input for key 8 (capacitive sense pad); leave floating when unused.
13 INT output Key-active indicator, an NMOS open-drain output that goes low when a key is touched and is high-impedance when no key is touched (needs an external pull-up).
14 SCL input I2C clock input; connect to GND or VDD when the I2C interface is not used, and add a 10 kΩ pull-up when a hardware I2C host is used.
15 SDA bidirectional I2C data input/output with an internal weak pull-up; connect to GND or VDD, or leave floating, when the I2C interface is not used.
16 VDD power_in Positive power supply input; the electrical table gives an operating range of 2.5 V to 6.5 V (features list 2.5 V to 6.0 V) and the absolute maximum is -0.3 V to +6.0 V.

Key specifications

Parameter Value
Manufacturer icman(晶尊微)
Package SOP-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
工作电压 (operating supply voltage) Vdd 2.5 6.5 V 11
消耗电流 (supply current) Idd 1 mA VDD=5.0V 11
消耗电流 (supply current) Idd 0.65 mA VDD=3.0V 11
消耗电流 (supply current in sleep) Idd 30 uA VDD=5.0V &SLEEP 11
消耗电流 (supply current in sleep) Idd 20 uA VDD=3.3V &SLEEP 11
芯片上电初始化时间 (power-on initialization time) Tini 300 ms 11
灵敏度电容 (sensitivity capacitor range, CDC) Cdc 5 100 pF 11
输出阻抗 (NMOS open-drain output impedance) Zo 50 Ohm delta Cin > 0.2pF 11
输出阻抗 (NMOS open-drain output impedance) Zo 100 M Ohm delta Cin < 0.2pF 11
输出灌电流 (output sink current) Isk 10 mA VDD=5V 11
最小可检测电容 (minimum detectable capacitance) delta_Cin 0.2 pF CDC= 5pf 11
I2C 最大波特率 (max I2C baud rate) Fbr 400 K Bit/S PullUp Res = 10K 11
采样间隔时间 (sampling interval, normal mode) Tsin 12.5 ms Normal mode 11
工作温度 (operating temperature) -40 85 ºC 11
存储温度 (storage temperature) -50 150 ºC 11
最大Vdd电压 (maximum Vdd voltage) Vdd -0.3 6 V 11
管脚最大直流输出电流 (max pin DC output current) -10 10 mA 11
管脚容限电压 (pin voltage tolerance) -0.3 V 11
Cmod 电荷收集电容范围 (charge-collection capacitor range) Cmod 1 10 nF 6

CAD (KiCad official)

  • Symbol: SC09B
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sc09b-etched.step / sc09b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc09b.step / sc09b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: icman(晶尊微) datasheet (21 pp, sha256 8e8324494b040255, retrieved 2026-10-31, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF