3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSC09B
icman(晶尊微) · Touch Sensors · SOP-16
SC09B from icman(晶尊微), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply ground input for the device, per the VDD/GND pin description. |
| 2 | CMOD | bidirectional | Charge-collection capacitor connection; a fixed-value capacitor between 1 nF and 10 nF (4.7 nF recommended) is used, independent of sensitivity. |
| 3 | CDC | bidirectional | Sensitivity capacitor connection with a range of 5 pF to 100 pF, where a smaller value gives higher sensitivity and 10% or better tolerance film, NPO or COG capacitors are recommended. |
| 4 | CIN0 | bidirectional | Touch sense input for key 0 (capacitive sense pad); leave floating when unused. |
| 5 | CIN1 | bidirectional | Touch sense input for key 1 (capacitive sense pad); leave floating when unused. |
| 6 | CIN2 | bidirectional | Touch sense input for key 2 (capacitive sense pad); leave floating when unused. |
| 7 | CIN3 | bidirectional | Touch sense input for key 3 (capacitive sense pad); leave floating when unused. |
| 8 | CIN4 | bidirectional | Touch sense input for key 4 (capacitive sense pad); leave floating when unused. |
| 9 | CIN5 | bidirectional | Touch sense input for key 5 (capacitive sense pad); leave floating when unused. |
| 10 | CIN6 | bidirectional | Touch sense input for key 6 (capacitive sense pad); leave floating when unused. |
| 11 | CIN7 | bidirectional | Touch sense input for key 7 (capacitive sense pad); leave floating when unused. |
| 12 | CIN8 | bidirectional | Touch sense input for key 8 (capacitive sense pad); leave floating when unused. |
| 13 | INT | output | Key-active indicator, an NMOS open-drain output that goes low when a key is touched and is high-impedance when no key is touched (needs an external pull-up). |
| 14 | SCL | input | I2C clock input; connect to GND or VDD when the I2C interface is not used, and add a 10 kΩ pull-up when a hardware I2C host is used. |
| 15 | SDA | bidirectional | I2C data input/output with an internal weak pull-up; connect to GND or VDD, or leave floating, when the I2C interface is not used. |
| 16 | VDD | power_in | Positive power supply input; the electrical table gives an operating range of 2.5 V to 6.5 V (features list 2.5 V to 6.0 V) and the absolute maximum is -0.3 V to +6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | icman(晶尊微) |
| Package | SOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 (operating supply voltage) | Vdd | 2.5 | 6.5 | V | 11 | ||
| 消耗电流 (supply current) | Idd | 1 | mA | VDD=5.0V | 11 | ||
| 消耗电流 (supply current) | Idd | 0.65 | mA | VDD=3.0V | 11 | ||
| 消耗电流 (supply current in sleep) | Idd | 30 | uA | VDD=5.0V &SLEEP | 11 | ||
| 消耗电流 (supply current in sleep) | Idd | 20 | uA | VDD=3.3V &SLEEP | 11 | ||
| 芯片上电初始化时间 (power-on initialization time) | Tini | 300 | ms | 11 | |||
| 灵敏度电容 (sensitivity capacitor range, CDC) | Cdc | 5 | 100 | pF | 11 | ||
| 输出阻抗 (NMOS open-drain output impedance) | Zo | 50 | Ohm | delta Cin > 0.2pF | 11 | ||
| 输出阻抗 (NMOS open-drain output impedance) | Zo | 100 | M Ohm | delta Cin < 0.2pF | 11 | ||
| 输出灌电流 (output sink current) | Isk | 10 | mA | VDD=5V | 11 | ||
| 最小可检测电容 (minimum detectable capacitance) | delta_Cin | 0.2 | pF | CDC= 5pf | 11 | ||
| I2C 最大波特率 (max I2C baud rate) | Fbr | 400 | K Bit/S | PullUp Res = 10K | 11 | ||
| 采样间隔时间 (sampling interval, normal mode) | Tsin | 12.5 | ms | Normal mode | 11 | ||
| 工作温度 (operating temperature) | -40 | 85 | ºC | 11 | |||
| 存储温度 (storage temperature) | -50 | 150 | ºC | 11 | |||
| 最大Vdd电压 (maximum Vdd voltage) | Vdd | -0.3 | 6 | V | 11 | ||
| 管脚最大直流输出电流 (max pin DC output current) | -10 | 10 | mA | 11 | |||
| 管脚容限电压 (pin voltage tolerance) | -0.3 | V | 11 | ||||
| Cmod 电荷收集电容范围 (charge-collection capacitor range) | Cmod | 1 | 10 | nF | 6 |
CAD (KiCad official)
- Symbol:
SC09B - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sc09b-etched.step/sc09b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc09b.step/sc09b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: icman(晶尊微) datasheet (21 pp, sha256
8e8324494b040255, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).