main
Ray Publish 0.1.2 5fbfa37
{
  "slug": "sc09a",
  "version": "0.1.2",
  "type": "component",
  "description": "ICMAN Tech Touch Sensors, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensor",
    "sc09a"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sc09a.kicad_sym",
    "sc09a.kicad_mod",
    "sc09a.glb",
    "sc09a.step",
    "sc09a.lbr",
    "docs/hero.png",
    "docs/sc09a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sc09a-etched.step",
    "sc09a-etched.glb",
    "sc09a-hero.glb",
    "sc09a-hero.overlay.json"
  ],
  "component": {
    "mpn": "SC09A",
    "manufacturer": "ICMAN Tech",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "Touch Sensors",
    "parts": {
      "symbol": "sc09a.kicad_sym",
      "footprint": "sc09a.kicad_mod",
      "model_3d": "sc09a-hero.glb",
      "model_3d_plain": "sc09a.glb",
      "model_3d_step": "sc09a-etched.step",
      "model_3d_step_plain": "sc09a.step",
      "lbr": "sc09a.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground / negative supply reference for the device."
      },
      {
        "number": "2",
        "name": "CMOD",
        "type": "passive",
        "description": "Charge-collection capacitor input. Connect a fixed capacitor (1nF~10nF, 4.7nF recommended) to GND; value does not affect sensitivity."
      },
      {
        "number": "3",
        "name": "CDC",
        "type": "passive",
        "description": "Sensitivity-setting capacitor input. Connect a capacitor between 15pF and 100pF to GND; smaller value → higher sensitivity."
      },
      {
        "number": "4",
        "name": "CIN0",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 0. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "5",
        "name": "CIN1",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 1. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "6",
        "name": "CIN2",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 2. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "7",
        "name": "CIN3",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 3. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "8",
        "name": "CIN4",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 4. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "9",
        "name": "CIN5",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 5. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "10",
        "name": "CIN6",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 6. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "11",
        "name": "CIN7",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 7. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "12",
        "name": "CIN8",
        "type": "bidirectional",
        "description": "Capacitive touch sense input for touch pad 8. Connect to sense pad; leave floating if unused."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Key-active interrupt output. Open-drain NMOS: pulled low when any key is touched, high-Z when no key is touched. Requires an external pull-up (typ. 10kΩ) if used; leave floating if unused."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input (CMOS input, driven by host controller). Max bus rate 400 kbit/s with 10kΩ pull-up. Tie to GND or VDD if the I2C interface is unused."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data input/output. Has an internal weak pull-up; an external 10kΩ pull-up is still recommended for bus operation. Tie to GND/VDD or leave floating if unused."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive power supply input, 2.5V to 6.0V (abs max 6.0V, electrical spec table lists max 6.5V). Typical Idd = 1.74mA @5V, 0.84mA @3V in normal mode; decouple with 100nF to GND."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C99083",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:16:03Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "sc09a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sc09a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7d6451f57808b3e11e82c33d22853355b09f9b656ebdedd23076ab9381f7b314",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}