main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sc09a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sc09a: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md sc09a: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
sc09a-etched.fit.json sc09a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sc09a-etched.glb sc09a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sc09a-etched.step sc09a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sc09a-hero.glb sc09a: hero from the plain model · Ray
sc09a-hero.overlay.json sc09a: hero from the plain model · Ray
sc09a.glb Publish 0.1.0 · Ray
sc09a.kicad_mod Publish 0.1.0 · Ray
sc09a.kicad_sym Publish 0.1.0 · Ray
sc09a.lbr Publish 0.1.0 · Ray
sc09a.step Publish 0.1.0 · Ray

SC09A

ICMAN Tech · Touch Sensors · SOP-16

SC09A from ICMAN Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground / negative supply reference for the device.
2 CMOD passive Charge-collection capacitor input. Connect a fixed capacitor (1nF~10nF, 4.7nF recommended) to GND; value does not affect sensitivity.
3 CDC passive Sensitivity-setting capacitor input. Connect a capacitor between 15pF and 100pF to GND; smaller value → higher sensitivity.
4 CIN0 bidirectional Capacitive touch sense input for touch pad 0. Connect to sense pad; leave floating if unused.
5 CIN1 bidirectional Capacitive touch sense input for touch pad 1. Connect to sense pad; leave floating if unused.
6 CIN2 bidirectional Capacitive touch sense input for touch pad 2. Connect to sense pad; leave floating if unused.
7 CIN3 bidirectional Capacitive touch sense input for touch pad 3. Connect to sense pad; leave floating if unused.
8 CIN4 bidirectional Capacitive touch sense input for touch pad 4. Connect to sense pad; leave floating if unused.
9 CIN5 bidirectional Capacitive touch sense input for touch pad 5. Connect to sense pad; leave floating if unused.
10 CIN6 bidirectional Capacitive touch sense input for touch pad 6. Connect to sense pad; leave floating if unused.
11 CIN7 bidirectional Capacitive touch sense input for touch pad 7. Connect to sense pad; leave floating if unused.
12 CIN8 bidirectional Capacitive touch sense input for touch pad 8. Connect to sense pad; leave floating if unused.
13 INT output Key-active interrupt output. Open-drain NMOS: pulled low when any key is touched, high-Z when no key is touched. Requires an external pull-up (typ. 10kΩ) if used; leave floating if unused.
14 SCL input I2C serial clock input (CMOS input, driven by host controller). Max bus rate 400 kbit/s with 10kΩ pull-up. Tie to GND or VDD if the I2C interface is unused.
15 SDA bidirectional I2C serial data input/output. Has an internal weak pull-up; an external 10kΩ pull-up is still recommended for bus operation. Tie to GND/VDD or leave floating if unused.
16 VDD power_in Positive power supply input, 2.5V to 6.0V (abs max 6.0V, electrical spec table lists max 6.5V). Typical Idd = 1.74mA @5V, 0.84mA @3V in normal mode; decouple with 100nF to GND.

Key specifications

Parameter Value
Manufacturer ICMAN Tech
Package SOP-16
Category Sensor
Pins 16

CAD (KiCad official)

  • Symbol: SC09A
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sc09a-etched.step / sc09a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sc09a.step / sc09a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ICMAN Tech datasheet (None pp, sha256 b378e995c0e22dc4, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF