main
Ray Publish 0.1.0 f98d6a8

SAK-XC2224L-20F66V AA

Infineon Technologies · Infineon · VQFN-48-EP(7x7)

SAK-XC2224L-20F66V AA from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TESTM input Testmode enable pin that must be held HIGH (connected to VDDPB) for normal operation, with an internal pull-up holding it high when undriven.
2 TRST input Test-system reset input that must be held low for normal operation, with an internal pull-down holding it low when undriven; a high level at the rising edge of PORST activates the debug system.
3 P6.3 bidirectional Bit 3 of Port 6, general-purpose I/O on a standard pad in domain B, with alternate functions including CCU63 channel 2 output and GPT12E timer T3 toggle latch output.
4 P6.1 bidirectional Bit 1 of Port 6, general-purpose I/O on a digital/analog pad in domain B, which also serves as ADC0 analog input channel 17 and external analog MUX control output 1.
5 P6.0 bidirectional Bit 0 of Port 6, general-purpose I/O on a digital/analog pad in domain B, which also serves as ADC0 analog input channel 16 and external analog MUX control output 0.
6 VSS power_in Digital ground that must be connected to the ground line or ground plane.
7 VDDPB power_in Digital pad supply voltage for domain B, with decoupling capacitors connected to adjacent VDDP/VSS pin pairs as close as possible to the pins.
8 VAREF power_in Reference voltage for the ADC0 A/D converter.
9 VAGND power_in Reference ground for the ADC0 A/D converter.
10 P5.0 input Bit 0 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 0.
11 P5.2 input Bit 2 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 2 and JTAG test data input TDI_A.
12 P5.3 input Bit 3 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 3 and GPT12E timer T3 count/gate input.
13 P5.4 input Bit 4 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 4 and JTAG test mode selection input TMS_A.
14 P5.8 input Bit 8 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 8 and external run control input for CCU6x T12.
15 P5.9 input Bit 9 of Port 5, general-purpose input-only pad, also ADC0 analog input channel 9 and CC2 timer T7 count input.
16 P2.0 bidirectional Bit 0 of Port 2, general-purpose I/O on a digital/analog pad in domain B, also ADC0 analog input channel 19 and CAN node 0 receive data input.
17 P2.1 bidirectional Bit 1 of Port 2, general-purpose I/O on a digital/analog pad in domain B, also CAN node 0 transmit data output and ADC0 analog input channel 20.
18 VDDIM power_in Digital core supply voltage for domain M that must be decoupled with a ceramic capacitor, and all VDDIM pins must be connected to each other.
19 VSS power_in Digital ground that must be connected to the ground line or ground plane.
20 VDDPB power_in Digital pad supply voltage for domain B, with decoupling capacitors connected to adjacent VDDP/VSS pin pairs as close as possible to the pins.
21 P2.2 bidirectional Bit 2 of Port 2, general-purpose I/O on a standard pad, also CAN node 1 transmit data output and ERU channel 1 input A0.
22 P2.3 bidirectional Bit 3 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 0 shift data output and CAN node 0 receive data input.
23 P2.4 bidirectional Bit 4 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 1 shift data output and CAN node 0 transmit data output.
24 P2.5 bidirectional Bit 5 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 0 shift clock output and CAN node 0 transmit data output.
25 P2.6 bidirectional Bit 6 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 0 select/control 0 output and clock signal input CLKIN1.
26 P2.7 bidirectional Bit 7 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 1 select/control 0 output and CAN node 1 receive data input.
27 P2.8 bidirectional Bit 8 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 1 shift clock output and programmable clock output EXTCLK.
28 P2.9 bidirectional Bit 9 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 1 shift data output, CAN node 1 transmit data output and configuration pin C1.
29 P2.10 bidirectional Bit 10 of Port 2, general-purpose I/O on a standard pad, also USIC0 channel 1 shift data output and GPT12E CAPREL capture input CAPINA.
30 P2.13 bidirectional Bit 13 of Port 2, general-purpose I/O on a standard pad, also USIC1 channel 1 shift data output and CCU63 channel 0 output.
31 P10.0 bidirectional Bit 0 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 1 shift data output, CCU60 channel 0 output and CCU60 channel 0 input.
32 P10.1 bidirectional Bit 1 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 shift data output, CCU60 channel 1 output and CCU60 channel 1 input.
33 P10.2 bidirectional Bit 2 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 shift clock output, CCU60 channel 2 output and CCU60 channel 2 input.
34 P10.3 bidirectional Bit 3 of Port 10, general-purpose I/O on a standard pad, also CCU60 channel 0 output, USIC0 shift control input and CAN node 1 receive data input.
35 P10.4 bidirectional Bit 4 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 select/control 3 output, CCU60 channel 1 output and ESR1 trigger input 9.
36 P10.5 bidirectional Bit 5 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 1 shift clock output and CCU60 channel 2 output.
37 P10.6 bidirectional Bit 6 of Port 10, general-purpose I/O on a standard pad, also USIC1 channel 0 shift data output and the CCU60/CCU63 emergency trap input.
38 P10.7 bidirectional Bit 7 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 1 shift data output, CCU60 channel 3 output and GPT12E timer T4 count/gate input.
39 P10.8 bidirectional Bit 8 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 master clock output, OCDS break signal input BRKIN_B and GPT12E timer T3 external up/down input.
40 P10.9 bidirectional Bit 9 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 select/control 4 output, CAN node 1 transmit data output and DAP0/JTAG clock input TCK_B.
41 VDDPB power_in Digital pad supply voltage for domain B, with decoupling capacitors connected to adjacent VDDP/VSS pin pairs as close as possible to the pins.
42 VSS power_in Digital ground that must be connected to the ground line or ground plane.
43 VDDIM power_in Digital core supply voltage for domain M that must be decoupled with a ceramic capacitor, and all VDDIM pins must be connected to each other.
44 P10.10 bidirectional Bit 10 of Port 10, general-purpose I/O on a standard pad, also USIC0 channel 0 select/control 0 output, CCU60 channel 3 output and JTAG test data input TDI_B.
45 P10.12 bidirectional Bit 12 of Port 10, general-purpose I/O on a standard pad, also DAP1/JTAG test data output TDO_A, SPD input/output and configuration pin C0.
46 XTAL2 output Crystal oscillator amplifier output, in the special/MP domain M pad class.
47 XTAL1 input Crystal oscillator amplifier input; to clock the device from an external source, drive XTAL1 while leaving XTAL2 unconnected, and voltages on XTAL1 must comply with VDDIM.
48 PORST input Power-on reset input where a low level resets the device completely; a spike filter suppresses pulses below 10 ns, pulses above 100 ns pass, and the minimum duration for safe recognition is 120 ns, with an internal pull-up.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package VQFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output current on a pin when high value is driven IOH -15 mA 58
Output current on a pin when low value is driven IOL 15 mA 58
Overload current IOV -5 5 mA 58
Absolute sum of overload currents Σ/IOV/ 50 mA 58
Junction Temperature TJ -40 150 °C 58
Storage Temperature TST -65 150 °C 58
Digital supply voltage for IO pads and voltage regulators VDDP -0.5 6 V 58
Voltage on any pin with respect to ground (Vss) VIN -0.5 V VIN≤ VDDP(max) 58
Voltage Regulator Buffer Capacitance for DMP_M CEVRM 1 4.7 μF 59
System frequency (66 MHz device) fSYS 66 MHz 59
Overload current for analog inputs IOVA -2 5 mA not subject to production test 59
Overload current for digital inputs IOVD -5 5 mA not subject to production test 59
Absolute sum of overload currents Σ/IOV/ 30 mA not subject to production test 60
Digital supply voltage for IO pads and voltage regulators VDDP 3 5.5 V 60
Upper voltage range definition: digital supply voltage VDDP 4.5 5 5.5 V 61
Lower voltage range definition: digital supply voltage VDDP 3 3.3 4.5 V 61
Pin capacitance (digital inputs/outputs) CIO 10 pF not subject to production test 64
Absolute input leakage current on pins of analog ports /IOZ1/ 10 200 nA VIN> VSS ; VIN< VDDP 64
Absolute input leakage current for all other pins /IOZ2/ 0.2 5 μA TJ≤ 110 °C; VIN> VSS ; VIN< VDDP 64
Absolute input leakage current for all other pins /IOZ2/ 0.2 10 μA TJ≤ 150 °C; VIN> VSS ; VIN< VDDP 64
Pull Level Force Current /IPLF/ 220 μA VIN≥ VIHmin (pulldown_enabled); VIN≤ VILmax (pullup_enabled) 64
Pull Level Keep Current /IPLK/ 30 μA VIN≥ VIHmin (pullup_enabled); VIN≤ VILmax (pulldown_enabled) 64
Input low voltage (all except XTAL1) VIL -0.3 V 65
Output Low Voltage VOL 0.4 V IOL≤ IOLnom 65
Output Low Voltage VOL 1 V IOL≤ IOLmax 65
Absolute input leakage current for all other pins /IOZ2/ 0.2 2 μA TJ≤ 110 °C; VIN> VSS ; VIN< VDDP 66
Absolute input leakage current for all other pins /IOZ2/ 0.2 6 μA TJ≤ 150 °C; VIN> VSS ; VIN< VDDP 66
Pull Level Force Current /IPLF/ 150 μA VIN≥ VIHmin (pulldown_enabled); VIN≤ VILmax (pullup_enabled) 66
Pull Level Keep Current /IPLK/ 10 μA VIN≥ VIHmin (pullup_enabled); VIN≤ VILmax (pulldown_enabled) 66
Output Low Voltage VOL 0.4 V IOL≤ IOLnom 67
Output Low Voltage VOL 1 V IOL≤ IOLmax 67
Power supply current in stopover mode, EVVRs on ISSO 0.7 2 mA power_mode=stopover ; voltage_range=both 69
Leakage supply current ILK1 0.03 0.04 mA TJ= 25 °C 70
Leakage supply current ILK1 0.4 1.1 mA TJ= 85 °C 70
Leakage supply current ILK1 1.7 4.9 mA TJ= 125 °C 70
Leakage supply current ILK1 3.5 10.7 mA TJ= 150 °C 70
Switched capacitance at an analog input CAINSW 9 20 pF not subject to production test 72
Total capacitance at an analog input CAINT 20 30 pF not subject to production test 72
Switched capacitance at the reference input CAREFSW 15 30 pF not subject to production test 72
Total capacitance at the reference input CAREFT 20 40 pF not subject to production test 72
Internal clock source frequency fINT 4.8 5 5.2 MHz 78
Short-term deviation of internal clock source frequency ΔfINT -1 1 % ΔTJ = ≤ 10°C 78
Wakeup clock source frequency fWU 400 700 kHz FREQSEL= 00 78
Wakeup clock source frequency fWU 210 390 kHz FREQSEL= 01 78
Wakeup clock source frequency fWU 140 260 kHz FREQSEL= 10 78
Wakeup clock source frequency fWU 110 200 kHz FREQSEL= 11 78
Startup time from power-on with code execution from Flash tSPO 1.4 1.9 2.4 ms fWU = 500 kHz 78
Thermal resistance Junction-Ambient RΘJA 73 K/W No thermal via, 2-layer 105
Thermal resistance Junction-Ambient RΘJA 49 K/W No thermal via, 4-layer 105
Thermal resistance Junction-Ambient RΘJA 43 K/W 4-layer, no pad 105
Thermal resistance Junction-Ambient RΘJA 34 K/W 4-layer, pad 105
Power Dissipation PDISS 0.7 W 105
Oscillator frequency fOSC 4 40 MHz Input= Clock Signal 89
Oscillator frequency fOSC 4 16 MHz Input= Crystal or Resonator 89

CAD (KiCad official)

  • Symbol: SAK-XC2224L-20F66V AA
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: sak-xc2224l-20f66v-aa-etched.step / sak-xc2224l-20f66v-aa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sak-xc2224l-20f66v-aa.step / sak-xc2224l-20f66v-aa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (109 pp, sha256 1977d9d787a44bf2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF