main
Ray Publish 0.1.0 bd1d2d5
{
  "slug": "sa571ws16arbq",
  "version": "0.1.0",
  "type": "component",
  "description": "GR Special Purpose Amplifiers, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "sa571ws16arbq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sa571ws16arbq.kicad_sym",
    "sa571ws16arbq.kicad_mod",
    "sa571ws16arbq.glb",
    "sa571ws16arbq.step",
    "sa571ws16arbq.lbr",
    "docs/hero.png",
    "docs/sa571ws16arbq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sa571ws16arbq-hero.glb",
    "sa571ws16arbq-hero.overlay.json"
  ],
  "component": {
    "mpn": "SA571WS16ARBQ",
    "manufacturer": "GR",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Amplifiers/Comparators",
    "subcategory": "Special Purpose Amplifiers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b098891842c7bfd038d840e1b270379d.pdf",
    "parts": {
      "symbol": "sa571ws16arbq.kicad_sym",
      "footprint": "sa571ws16arbq.kicad_mod",
      "model_3d": "sa571ws16arbq-hero.glb",
      "model_3d_plain": "sa571ws16arbq.glb",
      "model_3d_step": "sa571ws16arbq-etched.step",
      "model_3d_step_plain": "sa571ws16arbq.step",
      "lbr": "sa571ws16arbq.lbr"
    },
    "distributor_links": {
      "lcsc": "C42445175"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T03:42:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Cap1.rect",
        "type": "passive",
        "description": "Channel 1 rectifier filter capacitor terminal, where the rectified input current is averaged to set the gain of the variable gain cell."
      },
      {
        "number": "2",
        "name": "IN1.rect",
        "type": "input",
        "description": "Channel 1 full-wave rectifier input, with input current limited to 250 uA (external series resistor if needed) and ideally capacitively coupled."
      },
      {
        "number": "3",
        "name": "IN1.ΔG",
        "type": "input",
        "description": "Channel 1 variable gain cell input, where the input current flows to an internal summing node biased at VREF (1.8 V)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "IN1.inv",
        "type": "input",
        "description": "Channel 1 op amp inverting input, connected to the ΔG cell output and brought out externally."
      },
      {
        "number": "6",
        "name": "R31.res",
        "type": "passive",
        "description": "Channel 1 R3 resistor terminal brought out from the op amp summing node so gain is set by internal components."
      },
      {
        "number": "7",
        "name": "OUT1",
        "type": "output",
        "description": "Channel 1 op amp output, capable of ±20 mA output current."
      },
      {
        "number": "8",
        "name": "Thd1.trim",
        "type": "passive",
        "description": "Channel 1 THD trim terminal at VREF potential, used to null internal offsets for low distortion."
      },
      {
        "number": "9",
        "name": "Thd2.trim",
        "type": "passive",
        "description": "Channel 2 THD trim terminal at VREF potential, used to null internal offsets for low distortion."
      },
      {
        "number": "10",
        "name": "OUT2",
        "type": "output",
        "description": "Channel 2 op amp output, capable of ±20 mA output current."
      },
      {
        "number": "11",
        "name": "R32.res",
        "type": "passive",
        "description": "Channel 2 R3 resistor terminal brought out from the op amp summing node so gain is set by internal components."
      },
      {
        "number": "12",
        "name": "IN2.inv",
        "type": "input",
        "description": "Channel 2 op amp inverting input, connected to the ΔG cell output and brought out externally."
      },
      {
        "number": "13",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, 6 V to 18 V operating range (absolute maximum 18 V)."
      },
      {
        "number": "14",
        "name": "IN2.ΔG",
        "type": "input",
        "description": "Channel 2 variable gain cell input, where the input current flows to an internal summing node biased at VREF (1.8 V)."
      },
      {
        "number": "15",
        "name": "IN2.rect",
        "type": "input",
        "description": "Channel 2 full-wave rectifier input, with input current limited to 250 uA (external series resistor if needed) and ideally capacitively coupled."
      },
      {
        "number": "16",
        "name": "Cap2.rect",
        "type": "passive",
        "description": "Channel 2 rectifier filter capacitor terminal, where the rectified input current is averaged to set the gain of the variable gain cell."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one 16-pin top-view pinout (Figure 2.1) for the whole SA571 family (DIP, SOP-W, ; The datasheet has no pin description table. Pin types and descriptions are inferred from the pin nam",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 16,
        "cost_usd": 0.2659,
        "at": "2026-11-13T03:42:24"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/b098891842c7bfd038d840e1b270379d.pdf",
        "pages": 16,
        "sha256": "a76b6868f174fe0d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sa571ws16arbq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "da632621486d655929fd0dc27c17af22838f52a08d3e7e93d3848a01d9b04637",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sa571ws16arbq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0cf0ff9904fb04fdb6c42d4179cefee638eb8a2d9443ef535b2e33f6125b541c",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}