Generated by kicad-footprint-generator · KiCad file format 20260206
SA571WS16ARBQ
GR · Special Purpose Amplifiers · SOP-16-300mil
SA571WS16ARBQ from GR, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cap1.rect | passive | Channel 1 rectifier filter capacitor terminal, where the rectified input current is averaged to set the gain of the variable gain cell. |
| 2 | IN1.rect | input | Channel 1 full-wave rectifier input, with input current limited to 250 uA (external series resistor if needed) and ideally capacitively coupled. |
| 3 | IN1.ΔG | input | Channel 1 variable gain cell input, where the input current flows to an internal summing node biased at VREF (1.8 V). |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | IN1.inv | input | Channel 1 op amp inverting input, connected to the ΔG cell output and brought out externally. |
| 6 | R31.res | passive | Channel 1 R3 resistor terminal brought out from the op amp summing node so gain is set by internal components. |
| 7 | OUT1 | output | Channel 1 op amp output, capable of ±20 mA output current. |
| 8 | Thd1.trim | passive | Channel 1 THD trim terminal at VREF potential, used to null internal offsets for low distortion. |
| 9 | Thd2.trim | passive | Channel 2 THD trim terminal at VREF potential, used to null internal offsets for low distortion. |
| 10 | OUT2 | output | Channel 2 op amp output, capable of ±20 mA output current. |
| 11 | R32.res | passive | Channel 2 R3 resistor terminal brought out from the op amp summing node so gain is set by internal components. |
| 12 | IN2.inv | input | Channel 2 op amp inverting input, connected to the ΔG cell output and brought out externally. |
| 13 | VCC | power_in | Positive supply, 6 V to 18 V operating range (absolute maximum 18 V). |
| 14 | IN2.ΔG | input | Channel 2 variable gain cell input, where the input current flows to an internal summing node biased at VREF (1.8 V). |
| 15 | IN2.rect | input | Channel 2 full-wave rectifier input, with input current limited to 250 uA (external series resistor if needed) and ideally capacitively coupled. |
| 16 | Cap2.rect | passive | Channel 2 rectifier filter capacitor terminal, where the rectified input current is averaged to set the gain of the variable gain cell. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GR |
| Package | SOP-16-300mil |
| Category | Amplifiers/Comparators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 6 | 18 | V | 3 | ||
| Operating Supply Voltage (absolute maximum) | VCC | 18 | V | 2 | |||
| Operating Junction Temperature | TJ | -55 | 150 | ℃ | 2 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ℃ | 2 | ||
| Output Current Capability | IOUT | -20 | 20 | mA | 3 | ||
| Supply Current | ICC | 4.2 | 4.8 | mA | No Signal | 3 | |
| Gain Cell Distortion (Untrimmed) | 0.5 | 2 | % | Measured at 0 dBm, 1.0 kHz (Note 2) | 3 | ||
| Resistor Tolerance | -15 | 5 | 15 | % | 3 | ||
| Internal Reference Voltage | 1.65 | 1.8 | 1.95 | V | 3 | ||
| Output DC Shift (Untrimmed) | -150 | 90 | 150 | mV | Untrimmed (Note 3) | 3 | |
| Expandor Output Noise | 20 | 60 | µV | No Signal, 15 Hz−20 kHz (Note 1) | 3 | ||
| Unity Gain Level | -1.5 | 0 | 1.5 | dBm | 1.0kHz (Note 5) | 3 | |
| Reference Drift | -50 | 20 | mV | Relative to value at TA = 25°C (Note 4) | 3 | ||
| Tracking Error (V2 = −30 dBm, V1 = 0 dB) | -1 | 0.2 | 1.5 | dB | Rectifier input, VCC = +6.0 V | 3 |
CAD (KiCad official)
- Symbol:
SA571WS16ARBQ - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
sa571ws16arbq-etched.step/sa571ws16arbq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sa571ws16arbq.step/sa571ws16arbq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GR datasheet (16 pp, sha256
a76b6868f174fe0d, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).