Generated by kicad-footprint-generator · KiCad file format 20260206
SA56004ED
NXP Semicon · Temperature Sensors · SO-8
SA56004ED from NXP Semicon, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage, DC voltage from 3.0 V to 5.5 V. |
| 2 | D+ | passive | Diode current source (anode) connected to the remote sensing diode. |
| 3 | D- | passive | Diode sink current (cathode) connected to the remote sensing diode. |
| 4 | T_CRIT | output | Open-drain, active LOW T_CRIT alarm output requiring an external pull-up resistor, functioning as a system interrupt or power shutdown. |
| 5 | GND | power_in | Power supply ground. |
| 6 | ALERT | output | Open-drain, active LOW interrupt output requiring an external pull-up resistor, indicating on-chip or remote temperature above or below programmed overtemperature or undertemperature thresholds. |
| 7 | SDATA | bidirectional | SMBus/I2C-bus bidirectional data line, open-drain output requiring an external pull-up resistor. |
| 8 | SCLK | input | SMBus/I2C-bus clock input requiring an external pull-up resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | SO-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Local temperature error | TERRL | -2 | -1 | 2 | °C | Tamb = +60 °C to +100 °C | 27 |
| Local temperature error | TERRL | -3 | 3 | °C | Tamb = -40 °C to +125 °C | 27 | |
| Remote temperature error | TERRR | -1 | 1 | °C | Tamb = +25 °C to +85 °C; TRD = +60 °C to +100 °C | 27 | |
| Remote temperature error | TERRR | -3 | 3 | °C | Tamb = -40 °C to +85 °C; TRD = -40 °C to +125 °C | 27 | |
| Supply voltage | VDD | 3 | 5.5 | V | 27 | ||
| Undervoltage lockout threshold voltage | Vth(UVLO) | 2.6 | 2.95 | V | VDD input disables A/D conversion | 27 | |
| Power-on reset threshold voltage | Vth(POR) | 1.8 | 2.4 | V | VDD input falling edge | 27 | |
| Saturation voltage | Vsat | 0.4 | V | ALERT and T_CRIT output; IO = 6.0 mA | 27 | ||
| HIGH-level input voltage | VIH | 2.2 | V | SCLK, SDATA; VDD = 2.7 V to 5.5 V | 28 | ||
| LOW-level input voltage | VIL | 0.8 | V | SCLK, SDATA; VDD = 2.7 V to 5.5 V | 28 | ||
| LOW-level output current | IOL | 1 | mA | ALERT, T_CRIT; VOL = 0.4 V | 28 | ||
| LOW-level output current | IOL | 6 | mA | SDATA; VOL = 0.6 V | 28 | ||
| HIGH-level output current | IOH | 1 | µA | 28 | |||
| LOW-level input current | IIL | -1 | µA | 28 | |||
| HIGH-level input current | IIH | 1 | µA | 28 | |||
| SCLK operating frequency | fSCLK | 400 | kHz | 28 | |||
| SCLK LOW time | tLOW | 600 | 5000 | ns | 10 % to 10 % | 28 | |
| SCLK HIGH time | tHIGH | 600 | 5000 | ns | 90 % to 90 % | 28 | |
| SMBus free time | tBUF | 600 | ns | 28 | |||
| Hold time of START condition | tHD;STA | 600 | ns | 10 % of SDATA to 90 % of SCLK | 28 | ||
| Hold time of data | tHD;DAT | 0 | 300 | ns | 28 | ||
| Set-up time of data in | tSU;DAT | 250 | ns | 28 | |||
| Set-up time of repeat START condition | tSU;STA | 250 | ns | 90 % to 90 % | 28 | ||
| Set-up time of STOP condition | tSU;STO | 250 | ns | 90 % of SCLK to 90 % of SDATA | 28 | ||
| Rise time | tr | 1 | µs | SCLK and SDATA | 28 | ||
| Fall time | tf | 300 | ns | SCLK and SDATA | 28 | ||
| Output fall time | tof | 250 | ns | CL = 400 pF; IO = 3 mA | 28 | ||
| SMBus time-out time | tto(SMBus) | 25 | 35 | ms | 28 | ||
| Supply voltage (absolute maximum) | VDD | -0.3 | 6 | V | 26 | ||
| Voltage at SDATA, SCLK, ALERT, T_CRIT | -0.3 | 6 | V | 26 | |||
| Voltage at positive diode input | VD+ | -0.3 | V | max is VDD + 0.3 V | 26 | ||
| Voltage at negative diode input | VD- | -0.3 | 0.8 | V | 26 | ||
| Sink current SDATA, SCLK, ALERT, T_CRIT | Isink | -1 | 50 | mA | 26 | ||
| D+ input current | ID+ | -1 | 1 | mA | 26 | ||
| Electrostatic discharge voltage | VESD | 2000 | V | Human Body Model; D+ and D- pins are 1000 V HBM | 26 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 26 | |||
| Storage temperature | Tstg | -65 | 165 | °C | 26 | ||
| Operating ambient temperature | Tamb | -40 | 125 | °C | 3 | ||
| Operating supply voltage range | VDD | 3 | 3.6 | V | Table 20 header | 27 | |
| Remote temperature resolution | TRESR | 11 | bit | 27 | |||
| Remote temperature resolution | TRESR | 0.125 | °C | 27 | |||
| Local temperature resolution | TRESL | 11 | bit | 27 | |||
| Local temperature resolution | TRESL | 0.125 | °C | 27 | |||
| Conversion period | Tconv | 38 | ms | 27 | |||
| Quiescent current | IDD | 500 | µA | during conversion, 16 Hz conversion rate | 27 | ||
| Shut-down current | IDD | 10 | µA | SMBus inactive | 27 | ||
| Remote diode source current, high | IRD | 160 | µA | high setting: D+ - D- = +0.65 V | 27 | ||
| Remote diode source current, low | IRD | 10 | µA | low setting | 27 | ||
| High threshold temperature default | Tth(high) | 70 | °C | local and remote ALERT high default temperature settings; default values set at power-up | 27 | ||
| Low threshold temperature default | Tth(low) | 0 | °C | local and remote ALERT low default temperature settings; default values set at power-up | 27 | ||
| Critical threshold temperature default | Tth(crit) | 85 | °C | local and remote T_CRIT default temperature settings; default values set at power-up | 27 | ||
| Hysteresis temperature | Thys | 10 | °C | T_CRIT; default value set at power-up | 27 | ||
| Input capacitance | Ci | 5 | pF | SCLK, SDATA | 28 |
CAD (KiCad official)
- Symbol:
SA56004ED - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
sa56004ed-etched.step/sa56004ed-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sa56004ed.step/sa56004ed.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (43 pp, sha256
f591b9dba13d59ed, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).