Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SA56004ED

NXP Semicon · Temperature Sensors · SO-8

SA56004ED from NXP Semicon, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage, DC voltage from 3.0 V to 5.5 V.
2 D+ passive Diode current source (anode) connected to the remote sensing diode.
3 D- passive Diode sink current (cathode) connected to the remote sensing diode.
4 T_CRIT output Open-drain, active LOW T_CRIT alarm output requiring an external pull-up resistor, functioning as a system interrupt or power shutdown.
5 GND power_in Power supply ground.
6 ALERT output Open-drain, active LOW interrupt output requiring an external pull-up resistor, indicating on-chip or remote temperature above or below programmed overtemperature or undertemperature thresholds.
7 SDATA bidirectional SMBus/I2C-bus bidirectional data line, open-drain output requiring an external pull-up resistor.
8 SCLK input SMBus/I2C-bus clock input requiring an external pull-up resistor.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SO-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Local temperature error TERRL -2 -1 2 °C Tamb = +60 °C to +100 °C 27
Local temperature error TERRL -3 3 °C Tamb = -40 °C to +125 °C 27
Remote temperature error TERRR -1 1 °C Tamb = +25 °C to +85 °C; TRD = +60 °C to +100 °C 27
Remote temperature error TERRR -3 3 °C Tamb = -40 °C to +85 °C; TRD = -40 °C to +125 °C 27
Supply voltage VDD 3 5.5 V 27
Undervoltage lockout threshold voltage Vth(UVLO) 2.6 2.95 V VDD input disables A/D conversion 27
Power-on reset threshold voltage Vth(POR) 1.8 2.4 V VDD input falling edge 27
Saturation voltage Vsat 0.4 V ALERT and T_CRIT output; IO = 6.0 mA 27
HIGH-level input voltage VIH 2.2 V SCLK, SDATA; VDD = 2.7 V to 5.5 V 28
LOW-level input voltage VIL 0.8 V SCLK, SDATA; VDD = 2.7 V to 5.5 V 28
LOW-level output current IOL 1 mA ALERT, T_CRIT; VOL = 0.4 V 28
LOW-level output current IOL 6 mA SDATA; VOL = 0.6 V 28
HIGH-level output current IOH 1 µA 28
LOW-level input current IIL -1 µA 28
HIGH-level input current IIH 1 µA 28
SCLK operating frequency fSCLK 400 kHz 28
SCLK LOW time tLOW 600 5000 ns 10 % to 10 % 28
SCLK HIGH time tHIGH 600 5000 ns 90 % to 90 % 28
SMBus free time tBUF 600 ns 28
Hold time of START condition tHD;STA 600 ns 10 % of SDATA to 90 % of SCLK 28
Hold time of data tHD;DAT 0 300 ns 28
Set-up time of data in tSU;DAT 250 ns 28
Set-up time of repeat START condition tSU;STA 250 ns 90 % to 90 % 28
Set-up time of STOP condition tSU;STO 250 ns 90 % of SCLK to 90 % of SDATA 28
Rise time tr 1 µs SCLK and SDATA 28
Fall time tf 300 ns SCLK and SDATA 28
Output fall time tof 250 ns CL = 400 pF; IO = 3 mA 28
SMBus time-out time tto(SMBus) 25 35 ms 28
Supply voltage (absolute maximum) VDD -0.3 6 V 26
Voltage at SDATA, SCLK, ALERT, T_CRIT -0.3 6 V 26
Voltage at positive diode input VD+ -0.3 V max is VDD + 0.3 V 26
Voltage at negative diode input VD- -0.3 0.8 V 26
Sink current SDATA, SCLK, ALERT, T_CRIT Isink -1 50 mA 26
D+ input current ID+ -1 1 mA 26
Electrostatic discharge voltage VESD 2000 V Human Body Model; D+ and D- pins are 1000 V HBM 26
Maximum junction temperature Tj(max) 150 °C 26
Storage temperature Tstg -65 165 °C 26
Operating ambient temperature Tamb -40 125 °C 3
Operating supply voltage range VDD 3 3.6 V Table 20 header 27
Remote temperature resolution TRESR 11 bit 27
Remote temperature resolution TRESR 0.125 °C 27
Local temperature resolution TRESL 11 bit 27
Local temperature resolution TRESL 0.125 °C 27
Conversion period Tconv 38 ms 27
Quiescent current IDD 500 µA during conversion, 16 Hz conversion rate 27
Shut-down current IDD 10 µA SMBus inactive 27
Remote diode source current, high IRD 160 µA high setting: D+ - D- = +0.65 V 27
Remote diode source current, low IRD 10 µA low setting 27
High threshold temperature default Tth(high) 70 °C local and remote ALERT high default temperature settings; default values set at power-up 27
Low threshold temperature default Tth(low) 0 °C local and remote ALERT low default temperature settings; default values set at power-up 27
Critical threshold temperature default Tth(crit) 85 °C local and remote T_CRIT default temperature settings; default values set at power-up 27
Hysteresis temperature Thys 10 °C T_CRIT; default value set at power-up 27
Input capacitance Ci 5 pF SCLK, SDATA 28

CAD (KiCad official)

  • Symbol: SA56004ED
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: sa56004ed-etched.step / sa56004ed-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sa56004ed.step / sa56004ed.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (43 pp, sha256 f591b9dba13d59ed, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF