← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "sa3525sctr",+ "title": "SA3525SCTR",+ "brief": "Hangzhou Silan Microelectronics DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Hangzhou Silan Microelectronics DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "sa3525sctr" ],+ "component": {+ "mpn": "SA3525SCTR",+ "manufacturer": "Hangzhou Silan Microelectronics",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/82ffc2c31dd580fb67073bcc772edbcc.pdf",+ "parts": {+ "symbol": "sa3525sctr.kicad_sym",+ "footprint": "sa3525sctr.kicad_mod",+ "model_3d": "sa3525sctr.glb",+ "model_3d_step": "sa3525sctr.step",+ "lbr": "sa3525sctr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "E/A-",+ "type": "input",+ "description": "Error amplifier inverting input. Feedback voltage-divider node for the internal error amplifier (open-loop gain ~80 dB, CMRR ~90 dB)."+ },+ {+ "number": "2",+ "name": "E/A+",+ "type": "input",+ "description": "Error amplifier non-inverting input. Typically tied to the 5.1 V VREF through a divider to set the regulation setpoint. Common-mode range 1.5 V to 5.2 V."+ },+ {+ "number": "3",+ "name": "/SYNC",+ "type": "bidirectional",+ "description": "Oscillator sync I/O. Active-low sync input (threshold ~2 V, input current ~1.3 mA at 3.5 V) allowing an external clock to synchronize the internal oscillator; also outputs the internal sync pulse."+ },+ {+ "number": "4",+ "name": "OSCOUT",+ "type": "output",+ "description": "Oscillator clock output. Provides the internal oscillator waveform (clock amplitude ~4 V, width ~0.6 \u00b5s typ) for external timing or blanking use."+ },+ {+ "number": "5",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing capacitor connection. External CT to GND sets oscillator frequency together with RT (fOSC up to 400 kHz with CT = 470 pF, RT = 2 k\u03a9)."+ },+ {+ "number": "6",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing resistor connection. External RT to GND sets the CT charge current and hence the oscillator frequency."+ },+ {+ "number": "7",+ "name": "Discharge",+ "type": "output",+ "description": "Timing-capacitor discharge pin. Provides the CT discharge path to program the oscillator deadtime; typically connected through a resistor between CT and this pin."+ },+ {+ "number": "8",+ "name": "Soft-Start",+ "type": "passive",+ "description": "Soft-start capacitor input. An external capacitor to GND is charged by the internal ~51 \u00b5A source (25-80 \u00b5A) to slowly ramp the PWM duty cycle at startup."+ },+ {+ "number": "9",+ "name": "EAOUT",+ "type": "output",+ "description": "Error amplifier output / PWM comparator compensation node. Loop compensation network (R/C to E/A-) attaches here; voltage on this pin (VTH1=0.9 V to VTH2=3.2 V typ) sets the PWM duty cycle (0 to 49%)."+ },+ {+ "number": "10",+ "name": "/Shutdown",+ "type": "input",+ "description": "External shutdown input. Pulling this pin above VTH(SD) (~1.3 V typ) forces the outputs low and discharges the soft-start capacitor. Input current ~0.3 mA at 2.5 V."+ },+ {+ "number": "11",+ "name": "AOUT",+ "type": "output",+ "description": "Push-pull PWM output A. Alternates with BOUT at half oscillator frequency; sinks/sources up to 400 mA peak (500 mA abs max). VOH ~19 V at 20 mA sourcing when VC = 20 V."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Signal ground reference for the IC and return for all logic, oscillator, error amp, and output driver currents."+ },+ {+ "number": "13",+ "name": "VC",+ "type": "power_in",+ "description": "Output-stage collector bias supply. Separate power rail (up to 40 V abs max) for the AOUT/BOUT push-pull totem drivers, allowing the gate-drive rail to differ from the VCC control-logic supply."+ },+ {+ "number": "14",+ "name": "BOUT",+ "type": "output",+ "description": "Push-pull PWM output B. Complements AOUT with 180\u00b0 phase offset for driving external totem-pole MOSFET or transformer-coupled gate stages; same 400 mA peak drive spec."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "Main bias supply input. Operating range 8-35 V (40 V abs max), quiescent current ~12 mA typ (20 mA max). UVLO threshold ~8.8 V typ turns the outputs off below the lockout point."+ },+ {+ "number": "16",+ "name": "VREF",+ "type": "power_out",+ "description": "5.1 V \u00b11% precision reference output. Sourced up to 20 mA for external divider/bias use (50 mA abs max, short-circuit current ~80 mA); typically bypassed with 0.1 \u00b5F to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/82ffc2c31dd580fb67073bcc772edbcc.pdf",+ "pages": 8,+ "sha256": "a7e088aa93d1a759",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Hangzhou Silan Microelectronics",+ "Package": "SOP-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "sa3525sctr"+ ],+ "discovery_pitch": "SA3525SCTR (Hangzhou Silan Microelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/sa3525sctr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }