← Commit history

Initial commit: component/sa3525sctr

Ray ·3175655bed ·
2 files changed +91
README.mdadded+57
@@ -0,0 +1,57 @@+# SA3525SCTR++**Hangzhou Silan Microelectronics** · DC-DC Converters · SOP-16++SA3525SCTR from Hangzhou Silan Microelectronics, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E/A- | input | Error amplifier inverting input. Feedback voltage-divider node for the internal error amplifier (open-loop gain ~80 dB, CMRR ~90 dB). |+| 2 | E/A+ | input | Error amplifier non-inverting input. Typically tied to the 5.1 V VREF through a divider to set the regulation setpoint. Common-mode range 1.5 V to 5.2 V. |+| 3 | /SYNC | bidirectional | Oscillator sync I/O. Active-low sync input (threshold ~2 V, input current ~1.3 mA at 3.5 V) allowing an external clock to synchronize the internal oscillator; also outputs the internal sync pulse. |+| 4 | OSCOUT | output | Oscillator clock output. Provides the internal oscillator waveform (clock amplitude ~4 V, width ~0.6 µs typ) for external timing or blanking use. |+| 5 | CT | passive | Oscillator timing capacitor connection. External CT to GND sets oscillator frequency together with RT (fOSC up to 400 kHz with CT = 470 pF, RT = 2 kΩ). |+| 6 | RT | passive | Oscillator timing resistor connection. External RT to GND sets the CT charge current and hence the oscillator frequency. |+| 7 | Discharge | output | Timing-capacitor discharge pin. Provides the CT discharge path to program the oscillator deadtime; typically connected through a resistor between CT and this pin. |+| 8 | Soft-Start | passive | Soft-start capacitor input. An external capacitor to GND is charged by the internal ~51 µA source (25-80 µA) to slowly ramp the PWM duty cycle at startup. |+| 9 | EAOUT | output | Error amplifier output / PWM comparator compensation node. Loop compensation network (R/C to E/A-) attaches here; voltage on this pin (VTH1=0.9 V to VTH2=3.2 V typ) sets the PWM duty cycle (0 to 49%). |+| 10 | /Shutdown | input | External shutdown input. Pulling this pin above VTH(SD) (~1.3 V typ) forces the outputs low and discharges the soft-start capacitor. Input current ~0.3 mA at 2.5 V. |+| 11 | AOUT | output | Push-pull PWM output A. Alternates with BOUT at half oscillator frequency; sinks/sources up to 400 mA peak (500 mA abs max). VOH ~19 V at 20 mA sourcing when VC = 20 V. |+| 12 | GND | power_in | Signal ground reference for the IC and return for all logic, oscillator, error amp, and output driver currents. |+| 13 | VC | power_in | Output-stage collector bias supply. Separate power rail (up to 40 V abs max) for the AOUT/BOUT push-pull totem drivers, allowing the gate-drive rail to differ from the VCC control-logic supply. |+| 14 | BOUT | output | Push-pull PWM output B. Complements AOUT with 180° phase offset for driving external totem-pole MOSFET or transformer-coupled gate stages; same 400 mA peak drive spec. |+| 15 | VCC | power_in | Main bias supply input. Operating range 8-35 V (40 V abs max), quiescent current ~12 mA typ (20 mA max). UVLO threshold ~8.8 V typ turns the outputs off below the lockout point. |+| 16 | VREF | power_out | 5.1 V ±1% precision reference output. Sourced up to 20 mA for external divider/bias use (50 mA abs max, short-circuit current ~80 mA); typically bypassed with 0.1 µF to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Silan Microelectronics |+| Package | SOP-16 |+| Category | PMIC |+| Pins | 16 |++## Ordering variants++- `SA3525SCTR`+- `SA3525SCTRDC`++## CAD (KiCad official)++- Symbol: `SA3525SCTR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Silan Microelectronics datasheet](docs/sa3525sctr-datasheet.pdf) (8 pp, sha256 `a7e088aa93d1a759`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sa3525sctr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "sa3525sctr",+  "version": "0.1.0",+  "type": "component",+  "description": "Hangzhou Silan Microelectronics DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "sa3525sctr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sa3525sctr.kicad_sym",+    "sa3525sctr.kicad_mod",+    "sa3525sctr.glb",+    "sa3525sctr.step",+    "sa3525sctr.lbr",+    "docs/hero.png",+    "docs/sa3525sctr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file