main
Ray Publish 0.1.1 ee22d3b
{
  "slug": "s25fl512sagmfir11",
  "version": "0.1.1",
  "type": "component",
  "description": "Cypress Semicon Pre-ordered Products, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "electronic tools-instruments-consumables",
    "s25fl512sagmfir11",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "s25fl512sagmfir11.kicad_sym",
    "s25fl512sagmfir11.kicad_mod",
    "s25fl512sagmfir11.glb",
    "s25fl512sagmfir11.step",
    "s25fl512sagmfir11.lbr",
    "docs/hero.png",
    "docs/s25fl512sagmfir11-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "s25fl512sagmfir11-hero.glb",
    "s25fl512sagmfir11-hero.overlay.json",
    "s25fl512sagmfir11-etched.glb",
    "s25fl512sagmfir11-etched.step"
  ],
  "component": {
    "mpn": "S25FL512SAGMFIR11",
    "manufacturer": "Cypress Semicon",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Electronic Tools/Instruments/Consumables",
    "subcategory": "Pre-ordered Products",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/58796093afc77acab5a394e4529b135c.pdf",
    "parts": {
      "symbol": "s25fl512sagmfir11.kicad_sym",
      "footprint": "s25fl512sagmfir11.kicad_mod",
      "model_3d": "s25fl512sagmfir11-hero.glb",
      "model_3d_plain": "s25fl512sagmfir11.glb",
      "model_3d_step": "s25fl512sagmfir11-etched.step",
      "model_3d_step_plain": "s25fl512sagmfir11.step",
      "lbr": "s25fl512sagmfir11.lbr"
    },
    "distributor_links": {
      "lcsc": "C2953563",
      "digikey": "448-S25FL512SAGMFIR11-ND",
      "mouser": "797-25FL512SAGMFIR11"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T23:00:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "448-S25FL512SAGMFIR11-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "797-25FL512SAGMFIR11",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "HOLD#/IO3",
        "type": "bidirectional",
        "description": "HOLD# input pauses a command while low when Quad mode is not enabled (CR[1]=0), and the pin acts as I/O3 when Quad mode is enabled."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Core voltage supply for all internal logic, operating range 2.7 V to 3.6 V."
      },
      {
        "number": "3",
        "name": "RESET#",
        "type": "input",
        "description": "Hardware reset input; driving it low for tRP time starts the hardware reset process (bonded out in this R model, RFU in other models)."
      },
      {
        "number": "4",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: internal test signal with an internal pull-down resistor, may be left unconnected or tied to VSS and must not be connected to any host signal."
      },
      {
        "number": "5",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: internal test signal with an internal pull-down resistor, may be left unconnected or tied to VSS and must not be connected to any host signal."
      },
      {
        "number": "6",
        "name": "RFU",
        "type": "unconnected",
        "description": "Reserved for future use: no internal signal is currently connected, and it is recommended not to use it for PCB routing."
      },
      {
        "number": "7",
        "name": "CS#",
        "type": "input",
        "description": "Chip select input; the SPI interface is in standby when CS# is high and a command begins when it goes low."
      },
      {
        "number": "8",
        "name": "SO/IO1",
        "type": "bidirectional",
        "description": "Serial data output in single mode and I/O1 in dual and quad modes; high impedance during hold."
      },
      {
        "number": "9",
        "name": "WP#/IO2",
        "type": "bidirectional",
        "description": "Write protect input, relevant only during the instruction cycles of a WRR command, and I/O2 in quad mode."
      },
      {
        "number": "10",
        "name": "VSS",
        "type": "power_in",
        "description": "Common ground reference for the device core, input receivers and output drivers."
      },
      {
        "number": "11",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: internal test signal with an internal pull-down resistor, may be left unconnected or tied to VSS and must not be connected to any host signal."
      },
      {
        "number": "12",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: internal test signal with an internal pull-down resistor, may be left unconnected or tied to VSS and must not be connected to any host signal."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected: no internal signal is connected, and any signal connected to it must not exceed VIO."
      },
      {
        "number": "14",
        "name": "VIO",
        "type": "power_in",
        "description": "Versatile I/O supply for all input receivers and output drivers, range 1.65 V to VCC and never greater than VCC (bonded out in this R model, RFU in other models)."
      },
      {
        "number": "15",
        "name": "SI/IO0",
        "type": "bidirectional",
        "description": "Serial data input in single mode and I/O0 in dual and quad modes."
      },
      {
        "number": "16",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input for SPI modes 0 and 3."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout was read from the text-extracted SO16 connection diagram (Figure 39, page 46). The extrac"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0454,
        "at": "2026-10-30T23:00:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/58796093afc77acab5a394e4529b135c.pdf",
        "pages": 161,
        "sha256": "d1b81b9155595e47",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "s25fl512sagmfir11.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "s25fl512sagmfir11-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "76d3a87a5b1ee3c53033d1f03fbfd7ca15342c5594793295ad9c825ee91c6759",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "S25FL512SAGMFIR11",
  "brief": "Cypress Semicon Pre-ordered Products, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Cypress Semicon",
      "Package": "SOIC-16",
      "Category": "Electronic Tools/Instruments/Consumables",
      "Pins": "16"
    }
  },
  "discovery_triggers": [
    "s25fl512sagmfir11"
  ],
  "discovery_pitch": "S25FL512SAGMFIR11 (Cypress Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}