main
Ray Publish 0.1.0 d9476b6

S25FL256LAGNFI010

Infineon Technologies · NOR FLASH · WSON-8-EP(6x8)

S25FL256LAGNFI010 from Infineon Technologies, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; high deselects the device and tri-states outputs, low enables it and starts a command.
2 SO/IO1 bidirectional Serial Output for single-bit commands, or IO1 for Dual and Quad commands.
3 WP#/IO2 bidirectional Write Protect when not in Quad mode, IO2 in Quad/QPI mode; internal pull-up, may be left unconnected if unused.
4 VSS power_in Ground; common reference for the device core, input receivers and output drivers.
5 SI/IO0 bidirectional Serial Input for single-bit commands, or IO0 for Dual and Quad commands, latched on the rising SCK edge.
6 SCK input Serial Clock input providing the synchronization reference for the SPI interface; supports modes 0 and 3.
7 IO3/RESET# bidirectional IO3 in Quad/QPI mode, or hardware RESET# when enabled by CR2V[7]=1 and CS# is high or not in Quad mode; internal pull-up, may be left unconnected if unused.
8 VCC power_in Single power supply for all internal logic and operations, 2.7 V to 3.6 V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.7 3.6 V Single supply voltage with CMOS I/O 2
Operating temperature (industrial) -40 85 °C Industrial grade 2
Program/erase cycles 100000 cycles Minimum program/erase cycles 1
Data retention 20 years Minimum data retention time 2
Fast Read current 30 mA Fast Read 133 MHz, -40°C to +85°C 3
Program current 40 mA Program, -40°C to +85°C 3
Erase current 40 mA Erase, -40°C to +85°C 3
Standby current SPI 20 µA Standby SPI, -40°C to +85°C 3
Standby current QPI 60 µA Standby QPI, -40°C to +85°C 3
Deep power down current 2 µA Deep power down, -40°C to +85°C 3
Fast Read clock rate 133 MHz Fast Read, SDR 3

CAD (KiCad official)

  • Symbol: S25FL256LAGNFI010
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated on the KiCad land (body 8 x 6 mm, terminals on the pads, 0.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: s25fl256lagnfi010-etched.step / s25fl256lagnfi010-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s25fl256lagnfi010.step / s25fl256lagnfi010.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (184 pp, sha256 3bc123e5b688f7b7, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF