Generated by kicad-footprint-generator · KiCad file format 20260206
S25FL256LAGNFI010
Infineon Technologies · NOR FLASH · WSON-8-EP(6x8)
S25FL256LAGNFI010 from Infineon Technologies, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; high deselects the device and tri-states outputs, low enables it and starts a command. |
| 2 | SO/IO1 | bidirectional | Serial Output for single-bit commands, or IO1 for Dual and Quad commands. |
| 3 | WP#/IO2 | bidirectional | Write Protect when not in Quad mode, IO2 in Quad/QPI mode; internal pull-up, may be left unconnected if unused. |
| 4 | VSS | power_in | Ground; common reference for the device core, input receivers and output drivers. |
| 5 | SI/IO0 | bidirectional | Serial Input for single-bit commands, or IO0 for Dual and Quad commands, latched on the rising SCK edge. |
| 6 | SCK | input | Serial Clock input providing the synchronization reference for the SPI interface; supports modes 0 and 3. |
| 7 | IO3/RESET# | bidirectional | IO3 in Quad/QPI mode, or hardware RESET# when enabled by CR2V[7]=1 and CS# is high or not in Quad mode; internal pull-up, may be left unconnected if unused. |
| 8 | VCC | power_in | Single power supply for all internal logic and operations, 2.7 V to 3.6 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 3.6 | V | Single supply voltage with CMOS I/O | 2 | |
| Operating temperature (industrial) | -40 | 85 | °C | Industrial grade | 2 | ||
| Program/erase cycles | 100000 | cycles | Minimum program/erase cycles | 1 | |||
| Data retention | 20 | years | Minimum data retention time | 2 | |||
| Fast Read current | 30 | mA | Fast Read 133 MHz, -40°C to +85°C | 3 | |||
| Program current | 40 | mA | Program, -40°C to +85°C | 3 | |||
| Erase current | 40 | mA | Erase, -40°C to +85°C | 3 | |||
| Standby current SPI | 20 | µA | Standby SPI, -40°C to +85°C | 3 | |||
| Standby current QPI | 60 | µA | Standby QPI, -40°C to +85°C | 3 | |||
| Deep power down current | 2 | µA | Deep power down, -40°C to +85°C | 3 | |||
| Fast Read clock rate | 133 | MHz | Fast Read, SDR | 3 |
CAD (KiCad official)
- Symbol:
S25FL256LAGNFI010 - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated on the KiCad land (body 8 x 6 mm, terminals on the pads, 0.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
s25fl256lagnfi010-etched.step/s25fl256lagnfi010-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s25fl256lagnfi010.step/s25fl256lagnfi010.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (184 pp, sha256
3bc123e5b688f7b7, retrieved 2026-11-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).