main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers s25fl128sagnfi000: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md s25fl128sagnfi000: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
s25fl128sagnfi000-etched.glb Publish 0.1.0 · Ray
s25fl128sagnfi000-etched.step s25fl128sagnfi000: factory component page (tier=lcsc) · Ray
s25fl128sagnfi000-hero.glb s25fl128sagnfi000: hero GLB from the etched model (keeps the MPN mark) · Ray
s25fl128sagnfi000-hero.overlay.json Publish 0.1.0 · Ray
s25fl128sagnfi000.glb Publish 0.1.0 · Ray
s25fl128sagnfi000.kicad_mod Publish 0.1.0 · Ray
s25fl128sagnfi000.kicad_sym Publish 0.1.0 · Ray
s25fl128sagnfi000.lbr Publish 0.1.0 · Ray
s25fl128sagnfi000.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

S25FL128SAGNFI000

Cypress Semicon · NOR FLASH · WSON-8-EP(6x8)

S25FL128SAGNFI000 from Cypress Semicon, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip select input that frames each SPI command; RESET# and VIO are pulled to VCC internally in this package.
2 SO/IO1 bidirectional Serial data output in single SPI mode, and IO1 for dual and quad I/O modes.
3 WP#/IO2 bidirectional Write protect input in single SPI mode, and IO2 for quad I/O mode.
4 VSS power_in Common ground reference for the device core, input receivers and output drivers.
5 SI/IO0 bidirectional Serial data input in single SPI mode, and IO0 for dual and quad I/O modes.
6 SCK input Serial clock input for SPI clock modes 0 and 3.
7 HOLD#/IO3 bidirectional Hold input in single SPI mode, and IO3 for quad I/O mode.
8 VCC power_in Core supply voltage for all internal logic, 2.7V to 3.6V; VIO is tied to VCC internally in this package.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Cypress Semicon
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Low Voltage (min) VIL -0.5 V max is 0.2 x VIO as printed 26
Input Low Voltage (max, fraction of VIO) VIL 0.2 x VIO 26
Input High Voltage (min, fraction of VIO) VIH 0.7 x VIO max is VIO+0.4 V as printed 26
Output Low Voltage VOL 0.15 x VIO IOL = 1.6 mA, VCC = VCC min 26
Output High Voltage VOH 0.85 x VIO IOH = -0.1 mA 26
Input Leakage Current ILI -2 2 µA VCC = VCC Max, VIN = VIH or VIL 26
Output Leakage Current ILO -2 2 µA VCC = VCC Max, VIN = VIH or VIL 26
Active Supply Current READ Serial SDR@50 MHz ICC1 16 mA Outputs unconnected during read data return 26
Active Supply Current READ Serial SDR@133 MHz ICC1 33 mA Outputs unconnected during read data return 26
Active Supply Current READ Quad SDR@80 MHz ICC1 50 mA Outputs unconnected during read data return 26
Active Supply Current READ Quad SDR@104 MHz ICC1 61 mA Outputs unconnected during read data return 26
Active Supply Current READ Quad DDR@66 MHz ICC1 75 mA Outputs unconnected during read data return 26
Active Supply Current READ Quad DDR@80 MHz ICC1 90 mA Outputs unconnected during read data return 26
Active Supply Current (Page Program) ICC2 100 mA CS# = VIO 26
Active Supply Current (WRR) ICC3 100 mA CS# = VIO 26
Active Supply Current (SE) ICC4 100 mA CS# = VIO 26
Active Supply Current (BE) ICC5 100 mA CS# = VIO 26
Standby Current (Industrial) ISB 70 100 µA RESET#, CS# = VIO; SI, SCK = VIO or VSS, Industrial Temp 26
VCC (Minimum Operation Voltage) VCC (min) 2.7 V 25
VCC (Cut Off Where Re-initialization is Needed) VCC (cut-off) 2.4 V 25
VCC (Low Voltage for Initialization to Occur) VCC (low) 1.6 V 25
VCC (min) to Read Operation tPU 300 µs 25
VCC (low) Time tPD 15 µs 25
Input Capacitance CIN 8 pF 1 MHz, applies to SCK, CS#, RESET# 29
Output Capacitance COUT 8 pF 1 MHz, applies to All I/O 29
SCK Clock Frequency for READ and 4READ FSCK, R 0 50 MHz VIO = VCC 2.7V to 3.6V 31
SCK Clock Frequency for single commands FSCK, C 0 133 MHz VIO = VCC 2.7V to 3.6V 31
SCK Clock Frequency for dual and quad commands FSCK, C 0 104 MHz DOR, 4DOR, QOR, 4QOR, DIOR, 4DIOR, QIOR, 4QIOR 31
SCK Clock Frequency for QPP, 4QPP FSCK, QPP 0 80 MHz 31
Clock Low to Output Valid tV 8 ns Full VCC range (2.7 - 3.6V) and CL = 30 pF 31
Data in Setup Time tSU 1.5 3000 ns Max only applies during Program/Erase Suspend/Resume commands 31
Data in Hold Time tHD 2 ns 31
Output Hold Time tHO 2 ns 31
Output Disable Time tDIS 0 8 ns 31
CS# High Time (Read Instructions) tCS 10 ns 31
CS# High Time (Program/Erase) tCS 50 ns 31
VCC supply voltage VCC 2.7 3.6 V 23
VIO supply voltage VIO 1.65 V max is VCC +200 mV as printed 23
Ambient Temperature, Industrial (I) TA -40 85 °C 23
Storage Temperature Plastic Packages -65 150 °C 23
Ambient Temperature with Power Applied -65 125 °C 23
VCC VCC -0.5 4 V 23
VIO VIO -0.5 4 V VIO must always be less than or equal VCC + 200 mV 23
Input voltage with respect to Ground (VSS) -0.5 V max is VIO + 0.5V as printed 23
Output Short Circuit Current 100 mA No more than one output shorted at a time, not longer than one second 23
Thermal resistance (junction to ambient) Theta JA 28 °C/W S25FL128S, WNG008 (WSON) 23

CAD (KiCad official)

  • Symbol: S25FL128SAGNFI000
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: s25fl128sagnfi000-etched.step / s25fl128sagnfi000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s25fl128sagnfi000.step / s25fl128sagnfi000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Cypress Semicon datasheet (146 pp, sha256 4cdc2a61d3d31251, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF