main
Ray
s-1167b18-m5t1u: laser-etched CAD + chip hero (factory 2.0.0 backfill)
f5ac050
S-1167B18-M5T1U
ABLIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
S-1167B18-M5T1U from ABLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin. Operating range 2.0 V to 6.5 V (absolute max VSS − 0.3 V to VSS + 7 V). Bypass with a 1.0 µF or greater ceramic capacitor (CIN) to VSS placed as close as possible to this pin. |
| 2 | VSS | power_in | Ground (GND) reference pin. Common return for input and output capacitors; wiring impedance to this pin should be minimized. |
| 3 | ON/OFF | input | Regulator enable pin. B-type (positive logic): 'H' (VSH ≥ 1.5 V) = ON, 'L' (VSL ≤ 0.3 V) = OFF. Input current |
| 4 | NC | unconnected | No connection. Pin is electrically open inside the package; may be left floating or tied to VIN or VSS per the datasheet note. |
| 5 | VOUT | power_out | Regulated output voltage pin. Fixed 1.8 V ±1.0% for S-1167B18; output current up to 150 mA (VIN ≥ VOUT(S) + 1.0 V). Requires a ≥1.0 µF output capacitor (CL) to VSS with ESR ≤ 1.0 Ω for phase compensation/stability. Do not allow VOUT to exceed VIN + 0.3 V (parasitic diode). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
S-1167B18-M5T1US-1167B18-M5T1UM5T1GS-1167B18-M5T1UI6T2U
CAD (KiCad official)
- Symbol:
S-1167B18-M5T1U - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
s-1167b18-m5t1u-etched.step/s-1167b18-m5t1u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-1167b18-m5t1u.step/s-1167b18-m5t1u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ABLIC datasheet (None pp, sha256
0df82fa1e45e0b24, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# S-1167B18-M5T1U
**ABLIC** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
S-1167B18-M5T1U from ABLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin. Operating range 2.0 V to 6.5 V (absolute max VSS − 0.3 V to VSS + 7 V). Bypass with a 1.0 µF or greater ceramic capacitor (CIN) to VSS placed as close as possible to this pin. |
| 2 | VSS | power_in | Ground (GND) reference pin. Common return for input and output capacitors; wiring impedance to this pin should be minimized. |
| 3 | ON/OFF | input | Regulator enable pin. B-type (positive logic): 'H' (VSH ≥ 1.5 V) = ON, 'L' (VSL ≤ 0.3 V) = OFF. Input current |ISH|, |ISL| ≤ 0.1 µA at VIN = 6.5 V. Not internally pulled up or down - must not be left floating; when unused on the B-type, tie to VIN. |
| 4 | NC | unconnected | No connection. Pin is electrically open inside the package; may be left floating or tied to VIN or VSS per the datasheet note. |
| 5 | VOUT | power_out | Regulated output voltage pin. Fixed 1.8 V ±1.0% for S-1167B18; output current up to 150 mA (VIN ≥ VOUT(S) + 1.0 V). Requires a ≥1.0 µF output capacitor (CL) to VSS with ESR ≤ 1.0 Ω for phase compensation/stability. Do not allow VOUT to exceed VIN + 0.3 V (parasitic diode). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `S-1167B18-M5T1U`
- `S-1167B18-M5T1UM5T1G`
- `S-1167B18-M5T1UI6T2U`
## CAD (KiCad official)
- Symbol: `S-1167B18-M5T1U`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `s-1167b18-m5t1u-etched.step` / `s-1167b18-m5t1u-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `s-1167b18-m5t1u.step` / `s-1167b18-m5t1u.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ABLIC datasheet](docs/s-1167b18-m5t1u-datasheet.pdf) (None pp, sha256 `0df82fa1e45e0b24`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/s-1167b18-m5t1u-datasheet.pdf)