main
Ray
ry3708: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ab3127f
RY3708
RYCHIP · DC-DC Converters · SOT-23-6
RY3708 from RYCHIP, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | power_out | Power switch output; drain of the internal 80mΩ NMOS power switch (4A typical current limit, absolute max 10V). Connect the boost inductor and Schottky output rectifier here. |
| 2 | GND | power_in | Device ground return. Provides the return path for the internal power MOSFET and analog circuitry; tie feedback-divider ground here through a single-point star. |
| 3 | FB | input | Feedback input to the error amplifier, regulated to VFB = 0.6V (588-612mV). Set VOUT with a resistor divider: VOUT = 0.6V × (R1+R2)/R2. Input bias current is roughly -10nA (-50nA max) at VFB=0.6V. |
| 4 | EN | input | Regulator on/off control input. Logic-high (threshold ~1V, absolute max 6V) enables the converter; logic-low shuts it down (IIN ≤ 1µA). Tie to VIN for automatic start-up; do not leave floating. |
| 5 | IN | power_in | Input supply pin, 2.5V to 5.5V (absolute max 6V). Bypass locally with a low-ESR ceramic capacitor (22µF typical) placed as close as possible to the pin. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to ground for mechanical stability; do not use for signal routing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
RY370870390001
CAD (KiCad official)
- Symbol:
RY3708 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ry3708-etched.step/ry3708-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ry3708.step/ry3708.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RYCHIP datasheet (9 pp, sha256
259165a62f88b37e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RY3708
**RYCHIP** · DC-DC Converters · SOT-23-6
RY3708 from RYCHIP, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | power_out | Power switch output; drain of the internal 80mΩ NMOS power switch (4A typical current limit, absolute max 10V). Connect the boost inductor and Schottky output rectifier here. |
| 2 | GND | power_in | Device ground return. Provides the return path for the internal power MOSFET and analog circuitry; tie feedback-divider ground here through a single-point star. |
| 3 | FB | input | Feedback input to the error amplifier, regulated to VFB = 0.6V (588-612mV). Set VOUT with a resistor divider: VOUT = 0.6V × (R1+R2)/R2. Input bias current is roughly -10nA (-50nA max) at VFB=0.6V. |
| 4 | EN | input | Regulator on/off control input. Logic-high (threshold ~1V, absolute max 6V) enables the converter; logic-low shuts it down (IIN ≤ 1µA). Tie to VIN for automatic start-up; do not leave floating. |
| 5 | IN | power_in | Input supply pin, 2.5V to 5.5V (absolute max 6V). Bypass locally with a low-ESR ceramic capacitor (22µF typical) placed as close as possible to the pin. |
| 6 | NC | unconnected | No internal connection. Leave floating or tie to ground for mechanical stability; do not use for signal routing. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `RY370870390001`
## CAD (KiCad official)
- Symbol: `RY3708`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ry3708-etched.step` / `ry3708-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ry3708.step` / `ry3708.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RYCHIP datasheet](docs/ry3708-datasheet.pdf) (9 pp, sha256 `259165a62f88b37e`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ry3708-datasheet.pdf)