main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ry3708: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ry3708: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ry3708: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
ry3708-etched.fit.json ry3708: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3708-etched.glb ry3708: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3708-etched.step ry3708: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3708-hero.glb ry3708: hero from the plain model · Ray
ry3708-hero.overlay.json ry3708: hero from the plain model · Ray
ry3708.glb Publish 0.1.0 · Ray
ry3708.kicad_mod Publish 0.1.0 · Ray
ry3708.kicad_sym Publish 0.1.0 · Ray
ry3708.lbr Publish 0.1.0 · Ray
ry3708.step Publish 0.1.0 · Ray

RY3708

RYCHIP · DC-DC Converters · SOT-23-6

RY3708 from RYCHIP, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW power_out Power switch output; drain of the internal 80mΩ NMOS power switch (4A typical current limit, absolute max 10V). Connect the boost inductor and Schottky output rectifier here.
2 GND power_in Device ground return. Provides the return path for the internal power MOSFET and analog circuitry; tie feedback-divider ground here through a single-point star.
3 FB input Feedback input to the error amplifier, regulated to VFB = 0.6V (588-612mV). Set VOUT with a resistor divider: VOUT = 0.6V × (R1+R2)/R2. Input bias current is roughly -10nA (-50nA max) at VFB=0.6V.
4 EN input Regulator on/off control input. Logic-high (threshold ~1V, absolute max 6V) enables the converter; logic-low shuts it down (IIN ≤ 1µA). Tie to VIN for automatic start-up; do not leave floating.
5 IN power_in Input supply pin, 2.5V to 5.5V (absolute max 6V). Bypass locally with a low-ESR ceramic capacitor (22µF typical) placed as close as possible to the pin.
6 NC unconnected No internal connection. Leave floating or tie to ground for mechanical stability; do not use for signal routing.

Key specifications

Parameter Value
Manufacturer RYCHIP
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • RY370870390001

CAD (KiCad official)

  • Symbol: RY3708
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ry3708-etched.step / ry3708-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ry3708.step / ry3708.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RYCHIP datasheet (9 pp, sha256 259165a62f88b37e, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF