main
Ray
Publish 0.1.0
576075e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319
{
"slug": "rtq2513tgqw",
"version": "0.1.0",
"type": "component",
"description": "Richtek Tech Linear Voltage Regulators (LDO), VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management",
"rtq2513tgqw",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rtq2513tgqw.kicad_sym",
"rtq2513tgqw.kicad_mod",
"rtq2513tgqw.glb",
"rtq2513tgqw.step",
"rtq2513tgqw.lbr",
"docs/hero.png",
"docs/rtq2513tgqw-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"rtq2513tgqw-hero.glb",
"rtq2513tgqw-hero.overlay.json"
],
"component": {
"mpn": "RTQ2513TGQW",
"manufacturer": "Richtek Tech",
"package": "VQFN-20(3.5x3.5)",
"pin_count": 21,
"category": "Power Management",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5b01fc962405d24a6c1f912260d4fc5b.pdf",
"parts": {
"symbol": "rtq2513tgqw.kicad_sym",
"footprint": "rtq2513tgqw.kicad_mod",
"model_3d": "rtq2513tgqw-hero.glb",
"model_3d_plain": "rtq2513tgqw.glb",
"model_3d_step": "rtq2513tgqw-etched.step",
"model_3d_step_plain": "rtq2513tgqw.step",
"lbr": "rtq2513tgqw.lbr"
},
"distributor_links": {
"lcsc": "C6461172",
"digikey": "1028-RTQ2513TGQWTR-ND",
"mouser": "835-RTQ2513TGQW"
},
"distributor_check": {
"checked_at": "2026-11-12T19:49:48Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "1028-RTQ2513TGQWTR-ND",
"status": "found"
},
"mouser": {
"pn": "835-RTQ2513TGQW",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VOUT",
"type": "power_out",
"description": "LDO output pin; requires a 10µF or larger ceramic capacitor (4.7µF or greater effective) placed close to the device for stability."
},
{
"number": "2",
"name": "SNS",
"type": "input",
"description": "Output voltage sense input; connect only when setting VOUT by PCB layout, and keep floating if VOUT is set by an external resistor."
},
{
"number": "3",
"name": "FB",
"type": "input",
"description": "Feedback voltage input used to set the output voltage via an external resistive divider, with a typical 0.5V reference."
},
{
"number": "4",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power-good output, active high when VOUT reaches 88% of target and pulled low on undervoltage, EN shutdown, OCP and OTP."
},
{
"number": "5",
"name": "50mV",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 50mV to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "6",
"name": "100mV",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 100mV to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "7",
"name": "200mV",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 200mV to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "9",
"name": "400mV",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 400mV to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "10",
"name": "800mV",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 800mV to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "11",
"name": "1.6V",
"type": "passive",
"description": "Output voltage setting pin; connect to ground to add 1.6V to the output voltage, or leave floating if VOUT is set by an external resistor."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; may be left floating or tied to GND to extend top-layer GND copper for thermal convection."
},
{
"number": "13",
"name": "NR/SS",
"type": "passive",
"description": "Noise-reduction and soft-start pin; a capacitor to GND (10nF to 1µF suggested for low noise) reduces output noise and slows the VOUT rise."
},
{
"number": "14",
"name": "EN",
"type": "input",
"description": "Enable control input; logic high enables the regulator and driving it low puts the device in shutdown mode."
},
{
"number": "15",
"name": "VIN",
"type": "power_in",
"description": "Supply input; place a minimum 22µF ceramic capacitor as close as possible for better noise rejection."
},
{
"number": "16",
"name": "VIN",
"type": "power_in",
"description": "Supply input; place a minimum 22µF ceramic capacitor as close as possible for better noise rejection."
},
{
"number": "17",
"name": "VIN",
"type": "power_in",
"description": "Supply input; place a minimum 22µF ceramic capacitor as close as possible for better noise rejection."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "19",
"name": "VOUT",
"type": "power_out",
"description": "LDO output pin; requires a 10µF or larger ceramic capacitor (4.7µF or greater effective) placed close to the device for stability."
},
{
"number": "20",
"name": "VOUT",
"type": "power_out",
"description": "LDO output pin; requires a 10µF or larger ceramic capacitor (4.7µF or greater effective) placed close to the device for stability."
},
{
"number": "21",
"name": "GND",
"type": "power_in",
"description": "Exposed pad ground; must be soldered to a large PCB GND area for maximum power dissipation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Datasheet names the package WQFN-20L 3.5x3.5 (suffix QW); the hint says VQFN-20(3.5x3.5). Treated as; Setting-pin numbers come from the pin table, which lists 5, 6, 7, 9, 10, 11 in the order 50mV, 100mV; PGOOD is open-drain. It is typed 'output' here, but 'tri_state' or open-collector may suit the ERC b"
],
"pages_sent": 3,
"cost_usd": 0.0398,
"at": "2026-11-12T19:49:36"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/5b01fc962405d24a6c1f912260d4fc5b.pdf",
"pages": 18,
"sha256": "4e38b49659b0f27b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.75,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.0
},
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rtq2513tgqw.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.52,
3.52,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3674f63e114ba888c921be88981785943f43ec0119924325946cec6923873d45",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "rtq2513tgqw-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.52,
3.52,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e788ea492b6a2893e57c41c0d0f8829856726795f208046720738b7539731b44",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "QW: WQFN-20L 3.5x3.5 (W-Type 20L QFN 3.5x3.5)",
"source_page": 17,
"D": {
"nom_mm": 3.5,
"range_mm": [
3.4,
3.6
]
},
"E1": {
"nom_mm": 3.5,
"range_mm": [
3.4,
3.6
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "rtq2513tgqw.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}