main
History Download
Ray Publish 0.1.0 6b3b37a

RTL8306M-CG

Realtek Semicon · Ethernet Transceivers · QFN-64-EP(9x9)

RTL8306M-CG from Realtek Semicon, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDD18 power_in 1.8V analog power supply pin.
2 TXON[1] output Port1 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP.
3 TXOP[1] output Port1 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP.
4 RXIP[1] input Port1 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP.
5 RXIN[1] input Port1 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP.
6 AVDD18 power_in 1.8V analog power supply pin.
7 RXIN[2] input Port2 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP.
8 RXIP[2] input Port2 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP.
9 TXOP[2] output Port2 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP.
10 TXON[2] output Port2 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP.
11 AVDD18 power_in 1.8V analog power supply pin.
12 TXON[3] output Port3 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP.
13 TXOP[3] output Port3 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP.
14 RXIP[3] input Port3 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP.
15 RXIN[3] input Port3 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP.
16 AVDD18 power_in 1.8V analog power supply pin.
17 RXIN[4] input Port4 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP.
18 RXIP[4] input Port4 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP.
19 TXOP[4] output Port4 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP.
20 TXON[4] output Port4 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP.
21 SLP_WKP output Output (internal pull-up, 4 mA) used to power off the CPU for power saving and to power on or wake the CPU when a wakeup event occurs.
22 AVDD18 power_in 1.8V analog power supply pin.
23 RESET# input Active-low reset (internal pull-up, Schmitt input) that must be asserted for at least 1 µs; about 30 ms is needed after reset for internal tests and initialization.
24 DVDD18 power_in 1.8V digital power supply pin.
25 P4FLCTRL/CPU_INT# bidirectional Upon reset, strap for Port4 flow control (1 enable, 0 disable); after reset, output providing an interrupt signal to the CPU (internal pull-up, 4 mA).
26 DVDD18 power_in 1.8V digital power supply pin.
27 DVDD33 power_in 3.3V digital power supply pin.
28 SDA_MDIO bidirectional SDA (serial EEPROM data) when EnEEPROM=1, otherwise MDIO (SMI data); must be pulled high by an external resistor, 4 mA, internal pull-up.
29 SCL_MDC bidirectional SCL (EEPROM clock output) when EnEEPROM=1, otherwise MDC clock input of 0 to 2.5 MHz; tri-stated while RESET#=0.
30 PRXD[0]/M(R)TXD[0]/ENEEPROM bidirectional Upon reset, strap to enable serial EEPROM loading (1 enable, 0 disable); after reset, MAC5 or PHY-mode (T)MII or RMII TXD[0] output depending on mode.
31 DVDD18 power_in 1.8V digital power supply pin.
32 PRXD[1]/M(R)TXD[1]/GXENFC bidirectional Upon reset, strap to enable Group X (Port0) flow control (1 enable, 0 disable); after reset, MII/RMII TXD[1] output depending on mode.
33 PRXD[2]/MTXD[2]/GYENFC bidirectional Upon reset, strap to enable Group Y (Port1~Port3) flow control (1 enable, 0 disable); after reset, MAC or PHY-mode (T)MII TXD[2] output, not used in RMII.
34 PRXD[3]/MTXD[3]/ENBKPRS bidirectional Upon reset in all modes, strap to enable half-duplex backpressure on all UTP ports (1 enable, 0 disable); after reset, MAC or PHY-mode (T)MII TXD[3] output, not used in RMII.
35 PRXDV/M(R)TXEN/DISBRDCTRL bidirectional Upon reset in all modes, strap for broadcast storm control (1 disable, 0 enable); after reset, MII/RMII TXEN output depending on mode.
36 PRXC/MTXC/CTRL_REFCLK bidirectional In RMII mode, strap controlling the direction of pin 37 at reset (high: pin 37 receives external 50 MHz RMII clock; low: pin 37 outputs 50 MHz); in (T)MII modes, PRXC output or MTXC input.
37 PTXC/MRXC/REFCLK bidirectional In RMII mode, bidirectional 50 MHz REFCLK whose direction is set by pin 36; in MAC (T)MII mode an MRXC input, in PHY (T)MII mode a PTXC output.
38 PTXEN/MRXDV/CRSDV bidirectional Input PTXEN in PHY (T)MII mode, MRXDV in MAC (T)MII mode, or CRSDV in RMII mode (internal pull-down).
39 PTXD[0]/M(R)RXD[0] input Data input PTXD[0] in PHY (T)MII mode, MRXD[0] in MAC (T)MII mode, or RRXD[0] in RMII mode (internal pull-up).
40 PTXD[1]/M(R)RXD[1] input Data input PTXD[1] in PHY (T)MII mode, MRXD[1] in MAC (T)MII mode, or RRXD[1] in RMII mode (internal pull-up).
41 PTXD[2]/MRXD[2] input Data input PTXD[2] in PHY (T)MII mode or MRXD[2] in MAC (T)MII mode; not used in RMII mode (internal pull-up).
42 DVDD33 power_in 3.3V digital power supply pin.
43 PTXD[3]/MRXD[3] input Data input PTXD[3] in PHY (T)MII mode or MRXD[3] in MAC (T)MII mode; not used in RMII mode (internal pull-up).
44 PCOL/MCOL/LED_BLINK_TIME bidirectional Upon reset, strap for LED blink time (1: 43 ms on/43 ms off, 0: 120 ms on/120 ms off); after reset, PCOL output in PHY mode or MCOL input in MAC mode (internal pull-up, 4 mA).
45 LED_ACT[4] bidirectional LED output after reset (on when register bit is 1, off when 0 under CPU control); input strap upon reset (internal pull-up, 4 mA).
46 MODESET1 bidirectional Upon reset, used with MODESET0 to select MII/RMII operating mode for MAC5 (internal pull-up, 4 mA); output after reset.
47 LED_ACT[3]/EN48PASS1 bidirectional Upon reset, strap enabling 48-pass-1 (1: collide 48 input packets then pass 1 when buffer full; 0: continuously collide to avoid packet loss); after reset, LED output (internal pull-up, 4 mA).
48 MODESET0 bidirectional Upon reset, used with MODESET1 to select MII/RMII operating mode for MAC5 (11: MAC TMII, 10: MAC TMII enabled, 01: PHY (T)MII, 00: RMII); output after reset (internal pull-up, 4 mA).
49 DVDD18 power_in 1.8V digital power supply pin.
50 LED_ACT[2]/P4ANEG bidirectional Upon reset, strap for Port4 auto-negotiation (1: enable NWay, 0: force mode); after reset, LED output (internal pull-up, 4 mA).
51 LED_ACT[1]/GYSPD100 bidirectional Upon reset, strap for Group Y 10Base-T/100Base-TX ability (sets Reg.0.13 and Reg.4.5-4.8); after reset, LED output (internal pull-up, 4 mA).
52 LED_ACT[0]/BCINDROP bidirectional Upon reset, strap selecting broadcast input drop (1) or output drop (0); after reset, LED output that can indicate link/activity for Port0~4 (internal pull-up, 4 mA).
53 OSCI input 25 MHz clock input from an external oscillator; when used, X1 must be tied to ground and X2 left floating.
54 AVDD33 power_in 3.3V analog power supply pin.
55 AVDD18 power_in 1.8V analog power supply pin.
56 X1 input 25 MHz crystal input with ±50 ppm clock tolerance; tie to ground when an oscillator is used.
57 X2 output Crystal output; leave floating when an oscillator is used.
58 VCTRL output Voltage control output to an external regulator, driving a power PNP transistor to generate the 1.8V supply (4 mA).
59 IBREF passive Analog reference that controls transmit output waveform Vpp; must be grounded through a 1.96K ohm resistor.
60 AVDD18 power_in 1.8V analog power supply pin.
61 RXIN[0] input Port0 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP.
62 RXIP[0] input Port0 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP.
63 TXOP[0] output Port0 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP.
64 TXON[0] output Port0 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP.
65 E-PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Realtek Semicon
Package QFN-64-EP(9x9)
Category Interface
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Vcc Supply Referenced to GND -0.5 4 V Referenced to GND 95
Digital Input Voltage -0.5 V 95
DC Output Voltage -0.5 V 95
Storage Temperature -55 150 °C 95
Ambient Operating Temperature (Ta) Ta 0 70 °C 95
3.3V Vcc Supply Voltage Range (HVDD33, DVDD33) 3.13 3.47 V 95
1.8V Vcc Supply Voltage Range (DVDD18, AVDD18) 1.71 1.95 V 95
TTL Input High Voltage Vih 2 V 95
TTL Input Low Voltage Vil 0.8 V 95
TTL Input Current Iin -10 10 µA 95
Output High Voltage Voh 2.25 V 95
Output Low Voltage Vol 0.4 V 95
Output Three State Leakage Current /IOZ/ 10 µA 95
LED On Time tLEDon 43 120 ms LED blinking to indicate link information 97
LED Off Time tLEDoff 43 120 ms LED blinking to indicate link information 97
Max Junction Temperature 125 °C 96
MDC Clock Cycle Tcyc 400 ns SMI timing, MDC 99
MDIO Input Setup Time TIS 10 ns MDIO to MDC rising edge 99
MDIO Input Hold Time TIH 3 ns MDIO to MDC rising edge 99
MDIO Output Delay Time TD 9 40 ns MDIO to MDC rising edge 99
TXD[3:0], TXEN Output Setup Time (100Mbps) TOS 25 ns MAC mode MII, 100Mbps; MTXD[3:0], MTXEN to MTXC rising edge 98
TXD[3:0], TXEN Output Setup Time (10Mbps) TOS 380 ns MAC mode MII, 10Mbps; MTXD[3:0], MTXEN to MTXC rising edge 98
TXD[3:0], TXEN Output Hold Time (100Mbps) TOH 4 ns MAC mode MII, 100Mbps; MTXD[3:0], MTXEN to MTXC rising edge 98
TXD[3:0], TXEN Output Hold Time (10Mbps) TOH 4 ns MAC mode MII, 10Mbps; MTXD[3:0], MTXEN to MTXC rising edge 98
RXD[3:0], RXDV Input Setup Time TIS 5 ns MAC mode MII; MRXD[3:0], MRXDV to MRXC rising edge 98
RXD[3:0], RXDV Input Hold Time TIH 2 ns MAC mode MII; MRXD[3:0], MRXDV to MRXC rising edge 98
RXD[3:0], RXDV Output Setup Time (100Mbps) TOS 12 ns PHY mode MII, 100Mbps; PRXD[3:0], PRXDV to PRXC rising edge 98
RXD[3:0], RXDV Output Setup Time (10Mbps) TOS 180 ns PHY mode MII, 10Mbps; PRXD[3:0], PRXDV to PRXC rising edge 98
RXD[3:0], RXDV Output Hold Time (100Mbps) TOH 16 ns PHY mode MII, 100Mbps; PRXD[3:0], PRXDV to PRXC rising edge 98
RXD[3:0], RXDV Output Hold Time (10Mbps) TOH 180 ns PHY mode MII, 10Mbps; PRXD[3:0], PRXDV to PRXC rising edge 98
TXD[3:0], TXEN Input Setup Time (PHY MII) TIS 4 ns PHY mode MII; PTXD[3:0], PTXEN to PTXC rising edge 98
TXD[3:0], TXEN Input Hold Time (PHY MII) TIH 0 ns PHY mode MII; PTXD[3:0], PTXEN to PTXC rising edge 98
TXD[3:0], TXEN Output Setup Time (TMII) TOS 8 ns MAC mode TMII; MTXD[3:0], MTXEN to MTXC rising edge 98
TXD[3:0], TXEN Output Hold Time (TMII) TOH 4 ns MAC mode TMII; MTXD[3:0], MTXEN to MTXC rising edge 98
RXD[3:0], RXDV Input Setup Time (TMII) TIS 4 ns MAC mode TMII; MRXD[3:0], MRXDV to MRXC rising edge 98
RXD[3:0], RXDV Input Hold Time (TMII) TIH 2 ns MAC mode TMII; MRXD[3:0], MRXDV to MRXC rising edge 98
RXD[3:0], RXDV Output Setup Time (PHY TMII) TOS 6 ns PHY mode TMII; PRXD[3:0], PRXDV to PRXC rising edge 98
RXD[3:0], RXDV Output Hold Time (PHY TMII) TOH 8 ns PHY mode TMII; PRXD[3:0], PRXDV to PRXC rising edge 98
TXD[3:0], TXEN Input Setup Time (PHY TMII) TIS 4 ns PHY mode TMII; PTXD[3:0], PTXEN to PTXC rising edge 99
TXD[3:0], TXEN Input Hold Time (PHY TMII) TIH 0 ns PHY mode TMII; PTXD[3:0], PTXEN to PTXC rising edge 99
TXD[1:0], TXEN Output Setup Time (RMII) TOS 4 ns RMII; RTXD[1:0], RTXEN to REFCLK rising edge 99
TXD[1:0], TXEN Output Hold Time (RMII) TOH 2 ns RMII; RTXD[1:0], RTXEN to REFCLK rising edge 99
RXD[1:0], CRSDV Input Setup Time (RMII) TIS 4 ns RMII; RRXD[1:0], CRSDV to REFCLK rising edge 99
RXD[1:0], CRSDV Input Hold Time (RMII) TIH 2 ns RMII; RRXD[1:0], CRSDV to REFCLK rising edge 99
Data In Hold Time (EEPROM auto-load) t5 0 ns EEPROM auto-load timing 99
Data In Setup Time (EEPROM auto-load) t6 2 ns EEPROM auto-load timing 99
Thermal Resistance Junction-to-Ambient (θJA) θJA 20.6 °C/W Air flow 0 ms; 2-layer PCB, input power 1.2W 96
Thermal Resistance Junction-to-Case (θJC) θJC 8.5 °C/W Air flow 0 ms; 2-layer PCB, input power 1.2W 96
Thermal Resistance Junction-to-Board (θJB) θJB 8.8 °C/W Air flow 0 ms; 2-layer PCB, input power 1.2W 96

CAD (KiCad official)

  • Symbol: RTL8306M-CG
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: rtl8306m-cg-etched.step / rtl8306m-cg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rtl8306m-cg.step / rtl8306m-cg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Realtek Semicon datasheet (106 pp, sha256 c268352156c96dda, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF