Generated by kicad-footprint-generator · KiCad file format 20260206
RTL8306M-CG
Realtek Semicon · Ethernet Transceivers · QFN-64-EP(9x9)
RTL8306M-CG from Realtek Semicon, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 2 | TXON[1] | output | Port1 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP. |
| 3 | TXOP[1] | output | Port1 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP. |
| 4 | RXIP[1] | input | Port1 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP. |
| 5 | RXIN[1] | input | Port1 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP. |
| 6 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 7 | RXIN[2] | input | Port2 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP. |
| 8 | RXIP[2] | input | Port2 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP. |
| 9 | TXOP[2] | output | Port2 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP. |
| 10 | TXON[2] | output | Port2 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP. |
| 11 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 12 | TXON[3] | output | Port3 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP. |
| 13 | TXOP[3] | output | Port3 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP. |
| 14 | RXIP[3] | input | Port3 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP. |
| 15 | RXIN[3] | input | Port3 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP. |
| 16 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 17 | RXIN[4] | input | Port4 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP. |
| 18 | RXIP[4] | input | Port4 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP. |
| 19 | TXOP[4] | output | Port4 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP. |
| 20 | TXON[4] | output | Port4 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP. |
| 21 | SLP_WKP | output | Output (internal pull-up, 4 mA) used to power off the CPU for power saving and to power on or wake the CPU when a wakeup event occurs. |
| 22 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 23 | RESET# | input | Active-low reset (internal pull-up, Schmitt input) that must be asserted for at least 1 µs; about 30 ms is needed after reset for internal tests and initialization. |
| 24 | DVDD18 | power_in | 1.8V digital power supply pin. |
| 25 | P4FLCTRL/CPU_INT# | bidirectional | Upon reset, strap for Port4 flow control (1 enable, 0 disable); after reset, output providing an interrupt signal to the CPU (internal pull-up, 4 mA). |
| 26 | DVDD18 | power_in | 1.8V digital power supply pin. |
| 27 | DVDD33 | power_in | 3.3V digital power supply pin. |
| 28 | SDA_MDIO | bidirectional | SDA (serial EEPROM data) when EnEEPROM=1, otherwise MDIO (SMI data); must be pulled high by an external resistor, 4 mA, internal pull-up. |
| 29 | SCL_MDC | bidirectional | SCL (EEPROM clock output) when EnEEPROM=1, otherwise MDC clock input of 0 to 2.5 MHz; tri-stated while RESET#=0. |
| 30 | PRXD[0]/M(R)TXD[0]/ENEEPROM | bidirectional | Upon reset, strap to enable serial EEPROM loading (1 enable, 0 disable); after reset, MAC5 or PHY-mode (T)MII or RMII TXD[0] output depending on mode. |
| 31 | DVDD18 | power_in | 1.8V digital power supply pin. |
| 32 | PRXD[1]/M(R)TXD[1]/GXENFC | bidirectional | Upon reset, strap to enable Group X (Port0) flow control (1 enable, 0 disable); after reset, MII/RMII TXD[1] output depending on mode. |
| 33 | PRXD[2]/MTXD[2]/GYENFC | bidirectional | Upon reset, strap to enable Group Y (Port1~Port3) flow control (1 enable, 0 disable); after reset, MAC or PHY-mode (T)MII TXD[2] output, not used in RMII. |
| 34 | PRXD[3]/MTXD[3]/ENBKPRS | bidirectional | Upon reset in all modes, strap to enable half-duplex backpressure on all UTP ports (1 enable, 0 disable); after reset, MAC or PHY-mode (T)MII TXD[3] output, not used in RMII. |
| 35 | PRXDV/M(R)TXEN/DISBRDCTRL | bidirectional | Upon reset in all modes, strap for broadcast storm control (1 disable, 0 enable); after reset, MII/RMII TXEN output depending on mode. |
| 36 | PRXC/MTXC/CTRL_REFCLK | bidirectional | In RMII mode, strap controlling the direction of pin 37 at reset (high: pin 37 receives external 50 MHz RMII clock; low: pin 37 outputs 50 MHz); in (T)MII modes, PRXC output or MTXC input. |
| 37 | PTXC/MRXC/REFCLK | bidirectional | In RMII mode, bidirectional 50 MHz REFCLK whose direction is set by pin 36; in MAC (T)MII mode an MRXC input, in PHY (T)MII mode a PTXC output. |
| 38 | PTXEN/MRXDV/CRSDV | bidirectional | Input PTXEN in PHY (T)MII mode, MRXDV in MAC (T)MII mode, or CRSDV in RMII mode (internal pull-down). |
| 39 | PTXD[0]/M(R)RXD[0] | input | Data input PTXD[0] in PHY (T)MII mode, MRXD[0] in MAC (T)MII mode, or RRXD[0] in RMII mode (internal pull-up). |
| 40 | PTXD[1]/M(R)RXD[1] | input | Data input PTXD[1] in PHY (T)MII mode, MRXD[1] in MAC (T)MII mode, or RRXD[1] in RMII mode (internal pull-up). |
| 41 | PTXD[2]/MRXD[2] | input | Data input PTXD[2] in PHY (T)MII mode or MRXD[2] in MAC (T)MII mode; not used in RMII mode (internal pull-up). |
| 42 | DVDD33 | power_in | 3.3V digital power supply pin. |
| 43 | PTXD[3]/MRXD[3] | input | Data input PTXD[3] in PHY (T)MII mode or MRXD[3] in MAC (T)MII mode; not used in RMII mode (internal pull-up). |
| 44 | PCOL/MCOL/LED_BLINK_TIME | bidirectional | Upon reset, strap for LED blink time (1: 43 ms on/43 ms off, 0: 120 ms on/120 ms off); after reset, PCOL output in PHY mode or MCOL input in MAC mode (internal pull-up, 4 mA). |
| 45 | LED_ACT[4] | bidirectional | LED output after reset (on when register bit is 1, off when 0 under CPU control); input strap upon reset (internal pull-up, 4 mA). |
| 46 | MODESET1 | bidirectional | Upon reset, used with MODESET0 to select MII/RMII operating mode for MAC5 (internal pull-up, 4 mA); output after reset. |
| 47 | LED_ACT[3]/EN48PASS1 | bidirectional | Upon reset, strap enabling 48-pass-1 (1: collide 48 input packets then pass 1 when buffer full; 0: continuously collide to avoid packet loss); after reset, LED output (internal pull-up, 4 mA). |
| 48 | MODESET0 | bidirectional | Upon reset, used with MODESET1 to select MII/RMII operating mode for MAC5 (11: MAC TMII, 10: MAC TMII enabled, 01: PHY (T)MII, 00: RMII); output after reset (internal pull-up, 4 mA). |
| 49 | DVDD18 | power_in | 1.8V digital power supply pin. |
| 50 | LED_ACT[2]/P4ANEG | bidirectional | Upon reset, strap for Port4 auto-negotiation (1: enable NWay, 0: force mode); after reset, LED output (internal pull-up, 4 mA). |
| 51 | LED_ACT[1]/GYSPD100 | bidirectional | Upon reset, strap for Group Y 10Base-T/100Base-TX ability (sets Reg.0.13 and Reg.4.5-4.8); after reset, LED output (internal pull-up, 4 mA). |
| 52 | LED_ACT[0]/BCINDROP | bidirectional | Upon reset, strap selecting broadcast input drop (1) or output drop (0); after reset, LED output that can indicate link/activity for Port0~4 (internal pull-up, 4 mA). |
| 53 | OSCI | input | 25 MHz clock input from an external oscillator; when used, X1 must be tied to ground and X2 left floating. |
| 54 | AVDD33 | power_in | 3.3V analog power supply pin. |
| 55 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 56 | X1 | input | 25 MHz crystal input with ±50 ppm clock tolerance; tie to ground when an oscillator is used. |
| 57 | X2 | output | Crystal output; leave floating when an oscillator is used. |
| 58 | VCTRL | output | Voltage control output to an external regulator, driving a power PNP transistor to generate the 1.8V supply (4 mA). |
| 59 | IBREF | passive | Analog reference that controls transmit output waveform Vpp; must be grounded through a 1.96K ohm resistor. |
| 60 | AVDD18 | power_in | 1.8V analog power supply pin. |
| 61 | RXIN[0] | input | Port0 differential receive data input (negative) supporting 100Base-TX and 10Base-T UTP. |
| 62 | RXIP[0] | input | Port0 differential receive data input (positive) supporting 100Base-TX and 10Base-T UTP. |
| 63 | TXOP[0] | output | Port0 differential transmit output (positive) supporting 100Base-TX and 10Base-T UTP. |
| 64 | TXON[0] | output | Port0 differential transmit output (negative) supporting 100Base-TX and 10Base-T UTP. |
| 65 | E-PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realtek Semicon |
| Package | QFN-64-EP(9x9) |
| Category | Interface |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Vcc Supply Referenced to GND | -0.5 | 4 | V | Referenced to GND | 95 | ||
| Digital Input Voltage | -0.5 | V | 95 | ||||
| DC Output Voltage | -0.5 | V | 95 | ||||
| Storage Temperature | -55 | 150 | °C | 95 | |||
| Ambient Operating Temperature (Ta) | Ta | 0 | 70 | °C | 95 | ||
| 3.3V Vcc Supply Voltage Range (HVDD33, DVDD33) | 3.13 | 3.47 | V | 95 | |||
| 1.8V Vcc Supply Voltage Range (DVDD18, AVDD18) | 1.71 | 1.95 | V | 95 | |||
| TTL Input High Voltage | Vih | 2 | V | 95 | |||
| TTL Input Low Voltage | Vil | 0.8 | V | 95 | |||
| TTL Input Current | Iin | -10 | 10 | µA | 95 | ||
| Output High Voltage | Voh | 2.25 | V | 95 | |||
| Output Low Voltage | Vol | 0.4 | V | 95 | |||
| Output Three State Leakage Current | /IOZ/ | 10 | µA | 95 | |||
| LED On Time | tLEDon | 43 | 120 | ms | LED blinking to indicate link information | 97 | |
| LED Off Time | tLEDoff | 43 | 120 | ms | LED blinking to indicate link information | 97 | |
| Max Junction Temperature | 125 | °C | 96 | ||||
| MDC Clock Cycle | Tcyc | 400 | ns | SMI timing, MDC | 99 | ||
| MDIO Input Setup Time | TIS | 10 | ns | MDIO to MDC rising edge | 99 | ||
| MDIO Input Hold Time | TIH | 3 | ns | MDIO to MDC rising edge | 99 | ||
| MDIO Output Delay Time | TD | 9 | 40 | ns | MDIO to MDC rising edge | 99 | |
| TXD[3:0], TXEN Output Setup Time (100Mbps) | TOS | 25 | ns | MAC mode MII, 100Mbps; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| TXD[3:0], TXEN Output Setup Time (10Mbps) | TOS | 380 | ns | MAC mode MII, 10Mbps; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| TXD[3:0], TXEN Output Hold Time (100Mbps) | TOH | 4 | ns | MAC mode MII, 100Mbps; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| TXD[3:0], TXEN Output Hold Time (10Mbps) | TOH | 4 | ns | MAC mode MII, 10Mbps; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| RXD[3:0], RXDV Input Setup Time | TIS | 5 | ns | MAC mode MII; MRXD[3:0], MRXDV to MRXC rising edge | 98 | ||
| RXD[3:0], RXDV Input Hold Time | TIH | 2 | ns | MAC mode MII; MRXD[3:0], MRXDV to MRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Setup Time (100Mbps) | TOS | 12 | ns | PHY mode MII, 100Mbps; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Setup Time (10Mbps) | TOS | 180 | ns | PHY mode MII, 10Mbps; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Hold Time (100Mbps) | TOH | 16 | ns | PHY mode MII, 100Mbps; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Hold Time (10Mbps) | TOH | 180 | ns | PHY mode MII, 10Mbps; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| TXD[3:0], TXEN Input Setup Time (PHY MII) | TIS | 4 | ns | PHY mode MII; PTXD[3:0], PTXEN to PTXC rising edge | 98 | ||
| TXD[3:0], TXEN Input Hold Time (PHY MII) | TIH | 0 | ns | PHY mode MII; PTXD[3:0], PTXEN to PTXC rising edge | 98 | ||
| TXD[3:0], TXEN Output Setup Time (TMII) | TOS | 8 | ns | MAC mode TMII; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| TXD[3:0], TXEN Output Hold Time (TMII) | TOH | 4 | ns | MAC mode TMII; MTXD[3:0], MTXEN to MTXC rising edge | 98 | ||
| RXD[3:0], RXDV Input Setup Time (TMII) | TIS | 4 | ns | MAC mode TMII; MRXD[3:0], MRXDV to MRXC rising edge | 98 | ||
| RXD[3:0], RXDV Input Hold Time (TMII) | TIH | 2 | ns | MAC mode TMII; MRXD[3:0], MRXDV to MRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Setup Time (PHY TMII) | TOS | 6 | ns | PHY mode TMII; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| RXD[3:0], RXDV Output Hold Time (PHY TMII) | TOH | 8 | ns | PHY mode TMII; PRXD[3:0], PRXDV to PRXC rising edge | 98 | ||
| TXD[3:0], TXEN Input Setup Time (PHY TMII) | TIS | 4 | ns | PHY mode TMII; PTXD[3:0], PTXEN to PTXC rising edge | 99 | ||
| TXD[3:0], TXEN Input Hold Time (PHY TMII) | TIH | 0 | ns | PHY mode TMII; PTXD[3:0], PTXEN to PTXC rising edge | 99 | ||
| TXD[1:0], TXEN Output Setup Time (RMII) | TOS | 4 | ns | RMII; RTXD[1:0], RTXEN to REFCLK rising edge | 99 | ||
| TXD[1:0], TXEN Output Hold Time (RMII) | TOH | 2 | ns | RMII; RTXD[1:0], RTXEN to REFCLK rising edge | 99 | ||
| RXD[1:0], CRSDV Input Setup Time (RMII) | TIS | 4 | ns | RMII; RRXD[1:0], CRSDV to REFCLK rising edge | 99 | ||
| RXD[1:0], CRSDV Input Hold Time (RMII) | TIH | 2 | ns | RMII; RRXD[1:0], CRSDV to REFCLK rising edge | 99 | ||
| Data In Hold Time (EEPROM auto-load) | t5 | 0 | ns | EEPROM auto-load timing | 99 | ||
| Data In Setup Time (EEPROM auto-load) | t6 | 2 | ns | EEPROM auto-load timing | 99 | ||
| Thermal Resistance Junction-to-Ambient (θJA) | θJA | 20.6 | °C/W | Air flow 0 ms; 2-layer PCB, input power 1.2W | 96 | ||
| Thermal Resistance Junction-to-Case (θJC) | θJC | 8.5 | °C/W | Air flow 0 ms; 2-layer PCB, input power 1.2W | 96 | ||
| Thermal Resistance Junction-to-Board (θJB) | θJB | 8.8 | °C/W | Air flow 0 ms; 2-layer PCB, input power 1.2W | 96 |
CAD (KiCad official)
- Symbol:
RTL8306M-CG - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
rtl8306m-cg-etched.step/rtl8306m-cg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rtl8306m-cg.step/rtl8306m-cg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Realtek Semicon datasheet (106 pp, sha256
c268352156c96dda, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).